Uniden SDS100 and SDS200


Fred Miller
 

If I were to buy one of these scanners, should I have Uniden program it? What do you think of their "Expert Programming Team"?


Joe M.
 

I think they do not exist. Uniden does not sell scanners directly.

Joe M.

On 4/19/2020 10:45 PM, Fred Miller wrote:
If I were to buy one of these scanners, should I have Uniden program it?
What do you think of their "Expert Programming Team"?


Rick NK7I
 

Fred,

Uniden won't program it, but sales shops might for a fee.

All you have to know is the type of service that you want to hear and the zip code you're in, then set a range (in miles) and you'll hear a lot.

And if it plays too much or not enough of the right thing, you'd have to ship it off for weeks and spend still more money.  It's time to learn something new.

You can make a list of the specifics of what you want to hear and remove what you don't.  Using the programming software (which updates and uses a complete database), it's not that hard.  Create a list of what you want, push it into the scanner, listen.

You can run multiple lists at the same time (Hometown Fire, Hometown LE, Local Trains etc.).  If that's still too much, there are ways to quickly add/delete what you hear (without removing the lists).

I have a 'Winter load' list (road dept for plowboys, LE, Fire) then a "Summer Load" (the same plus forestry and a LOT of other fire season stuff) and with a few button pushes, can change them.  To those, I can add other lists (next state over, more counties away) with button pushes.  Start slow, build on your new knowledge.

The group is here to assist you in understanding.

Rick NK7I



On 4/19/2020 7:45 PM, Fred Miller wrote:

If I were to buy one of these scanners, should I have Uniden program it? What do you think of their "Expert Programming Team"?


Don Safer
 

While I worked at Ham Radio Outlet, 2015 - 2018, we would "pre program" 436 and 536 for a fee.
 
Don
KC6IPO
==========================


---------- Original Message ----------
From: "Rick Bates, NK7I" <Rick.NK7I@...>
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden SDS100 and SDS200
Date: Mon, 20 Apr 2020 07:39:36 -0700

Fred,

Uniden won't program it, but sales shops might for a fee.

All you have to know is the type of service that you want to hear and the zip code you're in, then set a range (in miles) and you'll hear a lot.

And if it plays too much or not enough of the right thing, you'd have to ship it off for weeks and spend still more money.  It's time to learn something new.

You can make a list of the specifics of what you want to hear and remove what you don't.  Using the programming software (which updates and uses a complete database), it's not that hard.  Create a list of what you want, push it into the scanner, listen.

You can run multiple lists at the same time (Hometown Fire, Hometown LE, Local Trains etc.).  If that's still too much, there are ways to quickly add/delete what you hear (without removing the lists).

I have a 'Winter load' list (road dept for plowboys, LE, Fire) then a "Summer Load" (the same plus forestry and a LOT of other fire season stuff) and with a few button pushes, can change them.  To those, I can add other lists (next state over, more counties away) with button pushes.  Start slow, build on your new knowledge.

The group is here to assist you in understanding.

Rick NK7I


 

On 4/19/2020 7:45 PM, Fred Miller wrote:
If I were to buy one of these scanners, should I have Uniden program it? What do you think of their "Expert Programming Team"?


gil kellersman
 

Don, you just started up a nice little business here! Good luck, Gil

On Monday, April 20, 2020, 12:47:54 PM EDT, Don Safer <dlsafer@...> wrote:


While I worked at Ham Radio Outlet, 2015 - 2018, we would "pre program" 436 and 536 for a fee.
 
Don
KC6IPO
==========================


---------- Original Message ----------
From: "Rick Bates, NK7I" <Rick.NK7I@...>
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden SDS100 and SDS200
Date: Mon, 20 Apr 2020 07:39:36 -0700

Fred,

Uniden won't program it, but sales shops might for a fee.

All you have to know is the type of service that you want to hear and the zip code you're in, then set a range (in miles) and you'll hear a lot.

And if it plays too much or not enough of the right thing, you'd have to ship it off for weeks and spend still more money.  It's time to learn something new.

You can make a list of the specifics of what you want to hear and remove what you don't.  Using the programming software (which updates and uses a complete database), it's not that hard.  Create a list of what you want, push it into the scanner, listen.

You can run multiple lists at the same time (Hometown Fire, Hometown LE, Local Trains etc.).  If that's still too much, there are ways to quickly add/delete what you hear (without removing the lists).

I have a 'Winter load' list (road dept for plowboys, LE, Fire) then a "Summer Load" (the same plus forestry and a LOT of other fire season stuff) and with a few button pushes, can change them.  To those, I can add other lists (next state over, more counties away) with button pushes.  Start slow, build on your new knowledge.

The group is here to assist you in understanding.

Rick NK7I


 

On 4/19/2020 7:45 PM, Fred Miller wrote:
If I were to buy one of these scanners, should I have Uniden program it? What do you think of their "Expert Programming Team"?


Mark Lassman
 

So you would do what ScannerMaster does and charge customers for punching in a zip code and checking off the Service Types?


On Apr 20, 2020, at 9:47 AM, Don Safer <dlsafer@...> wrote:


While I worked at Ham Radio Outlet, 2015 - 2018, we would "pre program" 436 and 536 for a fee.
 
Don
KC6IPO
==========================

---------- Original Message ----------
From: "Rick Bates, NK7I" <Rick.NK7I@...>
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden SDS100 and SDS200
Date: Mon, 20 Apr 2020 07:39:36 -0700

Fred,

Uniden won't program it, but sales shops might for a fee.

All you have to know is the type of service that you want to hear and the zip code you're in, then set a range (in miles) and you'll hear a lot.

And if it plays too much or not enough of the right thing, you'd have to ship it off for weeks and spend still more money.  It's time to learn something new.

You can make a list of the specifics of what you want to hear and remove what you don't.  Using the programming software (which updates and uses a complete database), it's not that hard.  Create a list of what you want, push it into the scanner, listen.

You can run multiple lists at the same time (Hometown Fire, Hometown LE, Local Trains etc.).  If that's still too much, there are ways to quickly add/delete what you hear (without removing the lists).

I have a 'Winter load' list (road dept for plowboys, LE, Fire) then a "Summer Load" (the same plus forestry and a LOT of other fire season stuff) and with a few button pushes, can change them.  To those, I can add other lists (next state over, more counties away) with button pushes.  Start slow, build on your new knowledge.

The group is here to assist you in understanding.

Rick NK7I


 

On 4/19/2020 7:45 PM, Fred Miller wrote:
If I were to buy one of these scanners, should I have Uniden program it? What do you think of their "Expert Programming Team"?


JD
 

Why pay someone to program your scanner when that is the best way for you to familiarize yourself with it and learn how to navigate the systems and learn how to operate it? Seems difficult at first but like anything else you will learn it eventually. Then you will be able to streamline your programming efficiently and know how to navigate your FLs for maximum effect. I would never pay for anyone to program my scanners. Best way to learn them. I am old school (in my 60s) and knuckled down and learned the ins and outs of Sentinel and I am forever glad that I did. I own an SDS100 and a 200 and they are fantastic scanners. When I got my SDS100 I was stumped, like a hog staring at a stopwatch lol...but persistence and tenacity and patience was the key and now I am very proficient with both scanners. Do yourself a big favor and knuckle down and learn how to program your scanner yourself. You will  thank yourself later! Above all, have fun with it!

JD
kf4anc

On Monday, April 20, 2020, 12:47:53 PM EDT, Don Safer <dlsafer@...> wrote:


While I worked at Ham Radio Outlet, 2015 - 2018, we would "pre program" 436 and 536 for a fee.
 
Don
KC6IPO
==========================


---------- Original Message ----------
From: "Rick Bates, NK7I" <Rick.NK7I@...>
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden SDS100 and SDS200
Date: Mon, 20 Apr 2020 07:39:36 -0700

Fred,

Uniden won't program it, but sales shops might for a fee.

All you have to know is the type of service that you want to hear and the zip code you're in, then set a range (in miles) and you'll hear a lot.

And if it plays too much or not enough of the right thing, you'd have to ship it off for weeks and spend still more money.  It's time to learn something new.

You can make a list of the specifics of what you want to hear and remove what you don't.  Using the programming software (which updates and uses a complete database), it's not that hard.  Create a list of what you want, push it into the scanner, listen.

You can run multiple lists at the same time (Hometown Fire, Hometown LE, Local Trains etc.).  If that's still too much, there are ways to quickly add/delete what you hear (without removing the lists).

I have a 'Winter load' list (road dept for plowboys, LE, Fire) then a "Summer Load" (the same plus forestry and a LOT of other fire season stuff) and with a few button pushes, can change them.  To those, I can add other lists (next state over, more counties away) with button pushes.  Start slow, build on your new knowledge.

The group is here to assist you in understanding.

Rick NK7I


 

On 4/19/2020 7:45 PM, Fred Miller wrote:
If I were to buy one of these scanners, should I have Uniden program it? What do you think of their "Expert Programming Team"?


barbara speir
 

I would GLADLY pay someone because I am not tech savvy and I am not getting full use of either of my scanners


On Mon, Apr 20, 2020 at 1:58 PM, JD
<kf4anc@...> wrote:
Why pay someone to program your scanner when that is the best way for you to familiarize yourself with it and learn how to navigate the systems and learn how to operate it? Seems difficult at first but like anything else you will learn it eventually. Then you will be able to streamline your programming efficiently and know how to navigate your FLs for maximum effect. I would never pay for anyone to program my scanners. Best way to learn them. I am old school (in my 60s) and knuckled down and learned the ins and outs of Sentinel and I am forever glad that I did. I own an SDS100 and a 200 and they are fantastic scanners. When I got my SDS100 I was stumped, like a hog staring at a stopwatch lol...but persistence and tenacity and patience was the key and now I am very proficient with both scanners. Do yourself a big favor and knuckle down and learn how to program your scanner yourself. You will  thank yourself later! Above all, have fun with it!

JD
kf4anc

On Monday, April 20, 2020, 12:47:53 PM EDT, Don Safer <dlsafer@...> wrote:


While I worked at Ham Radio Outlet, 2015 - 2018, we would "pre program" 436 and 536 for a fee.
 
Don
KC6IPO
==========================

---------- Original Message ----------
From: "Rick Bates, NK7I" <Rick.NK7I@...>
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden SDS100 and SDS200
Date: Mon, 20 Apr 2020 07:39:36 -0700

Fred,

Uniden won't program it, but sales shops might for a fee.

All you have to know is the type of service that you want to hear and the zip code you're in, then set a range (in miles) and you'll hear a lot.

And if it plays too much or not enough of the right thing, you'd have to ship it off for weeks and spend still more money.  It's time to learn something new.

You can make a list of the specifics of what you want to hear and remove what you don't.  Using the programming software (which updates and uses a complete database), it's not that hard.  Create a list of what you want, push it into the scanner, listen.

You can run multiple lists at the same time (Hometown Fire, Hometown LE, Local Trains etc.).  If that's still too much, there are ways to quickly add/delete what you hear (without removing the lists).

I have a 'Winter load' list (road dept for plowboys, LE, Fire) then a "Summer Load" (the same plus forestry and a LOT of other fire season stuff) and with a few button pushes, can change them.  To those, I can add other lists (next state over, more counties away) with button pushes.  Start slow, build on your new knowledge.

The group is here to assist you in understanding.

Rick NK7I


 

On 4/19/2020 7:45 PM, Fred Miller wrote:
If I were to buy one of these scanners, should I have Uniden program it? What do you think of their "Expert Programming Team"?


Rick NK7I
 

I would start by finding someone local to you, then asking them for programming help.  One of the beauties of the Sentinel software, is that one can share programming loads via email.  It may be as simple as loading their programming.

That help may also be able to advise you, in person, in learning how to take care of it yourself.

Rick


On 4/20/2020 12:01 PM, barbara speir wrote:

I would GLADLY pay someone because I am not tech savvy and I am not getting full use of either of my scanners


On Mon, Apr 20, 2020 at 1:58 PM, JD
Why pay someone to program your scanner when that is the best way for you to familiarize yourself with it and learn how to navigate the systems and learn how to operate it? Seems difficult at first but like anything else you will learn it eventually. Then you will be able to streamline your programming efficiently and know how to navigate your FLs for maximum effect. I would never pay for anyone to program my scanners. Best way to learn them. I am old school (in my 60s) and knuckled down and learned the ins and outs of Sentinel and I am forever glad that I did. I own an SDS100 and a 200 and they are fantastic scanners. When I got my SDS100 I was stumped, like a hog staring at a stopwatch lol...but persistence and tenacity and patience was the key and now I am very proficient with both scanners. Do yourself a big favor and knuckle down and learn how to program your scanner yourself. You will  thank yourself later! Above all, have fun with it!

JD
kf4anc

On Monday, April 20, 2020, 12:47:53 PM EDT, Don Safer <dlsafer@...> wrote:


While I worked at Ham Radio Outlet, 2015 - 2018, we would "pre program" 436 and 536 for a fee.
 
Don
KC6IPO
==========================

---------- Original Message ----------
From: "Rick Bates, NK7I" <Rick.NK7I@...>
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden SDS100 and SDS200
Date: Mon, 20 Apr 2020 07:39:36 -0700

Fred,

Uniden won't program it, but sales shops might for a fee.

All you have to know is the type of service that you want to hear and the zip code you're in, then set a range (in miles) and you'll hear a lot.

And if it plays too much or not enough of the right thing, you'd have to ship it off for weeks and spend still more money.  It's time to learn something new.

You can make a list of the specifics of what you want to hear and remove what you don't.  Using the programming software (which updates and uses a complete database), it's not that hard.  Create a list of what you want, push it into the scanner, listen.

You can run multiple lists at the same time (Hometown Fire, Hometown LE, Local Trains etc.).  If that's still too much, there are ways to quickly add/delete what you hear (without removing the lists).

I have a 'Winter load' list (road dept for plowboys, LE, Fire) then a "Summer Load" (the same plus forestry and a LOT of other fire season stuff) and with a few button pushes, can change them.  To those, I can add other lists (next state over, more counties away) with button pushes.  Start slow, build on your new knowledge.

The group is here to assist you in understanding.

Rick NK7I


 

On 4/19/2020 7:45 PM, Fred Miller wrote:
If I were to buy one of these scanners, should I have Uniden program it? What do you think of their "Expert Programming Team"?


Maggie O'Connor
 

Hi Barbara,
Rick is right – I did both things he mentioned – found someone close to me to show me how to use the software (and I am a techy but still needed help) and he gave me, which I still use, some of his favorites lists.  For someone to show you the software – they don’t even have to be near you – you can share your computer screen easily these days.  I don’t know where you are, but I’d be happy to help – IF... It’s the Sentinel Software for these models.  I have the 436 and it was a huge learning curve for me, and I’m ashamed of how much (easy stuff) I still can’t do – and work around (by still using an old scanner) – even with all the tons of help here on the group.
 
Let me know if I can be of any help to you.  I’m in Mass – but again – I could give you a quick overview of the software.. just the basics, but that’s been working for me on the 436 for years!
 
- Maggie
 
Sent: Monday, April 20, 2020 4:00 PM
Subject: Re: [Uniden] Uniden SDS100 and SDS200
 

I would start by finding someone local to you, then asking them for programming help.  One of the beauties of the Sentinel software, is that one can share programming loads via email.  It may be as simple as loading their programming.

That help may also be able to advise you, in person, in learning how to take care of it yourself.

Rick


On 4/20/2020 12:01 PM, barbara speir wrote:

I would GLADLY pay someone because I am not tech savvy and I am not getting full use of either of my scanners


On Mon, Apr 20, 2020 at 1:58 PM, JD
Why pay someone to program your scanner when that is the best way for you to familiarize yourself with it and learn how to navigate the systems and learn how to operate it? Seems difficult at first but like anything else you will learn it eventually. Then you will be able to streamline your programming efficiently and know how to navigate your FLs for maximum effect. I would never pay for anyone to program my scanners. Best way to learn them. I am old school (in my 60s) and knuckled down and learned the ins and outs of Sentinel and I am forever glad that I did. I own an SDS100 and a 200 and they are fantastic scanners. When I got my SDS100 I was stumped, like a hog staring at a stopwatch lol...but persistence and tenacity and patience was the key and now I am very proficient with both scanners. Do yourself a big favor and knuckle down and learn how to program your scanner yourself. You will  thank yourself later! Above all, have fun with it!
 
JD
kf4anc
 
On Monday, April 20, 2020, 12:47:53 PM EDT, Don Safer mailto:dlsafer@... wrote:
 
 
While I worked at Ham Radio Outlet, 2015 - 2018, we would "pre program" 436 and 536 for a fee.
 
Don
KC6IPO
==========================

---------- Original Message ----------
From: "Rick Bates, NK7I" mailto:Rick.NK7I@...
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden SDS100 and SDS200
Date: Mon, 20 Apr 2020 07:39:36 -0700

Fred,

Uniden won't program it, but sales shops might for a fee.

All you have to know is the type of service that you want to hear and the zip code you're in, then set a range (in miles) and you'll hear a lot.

And if it plays too much or not enough of the right thing, you'd have to ship it off for weeks and spend still more money.  It's time to learn something new.

You can make a list of the specifics of what you want to hear and remove what you don't.  Using the programming software (which updates and uses a complete database), it's not that hard.  Create a list of what you want, push it into the scanner, listen.

You can run multiple lists at the same time (Hometown Fire, Hometown LE, Local Trains etc.).  If that's still too much, there are ways to quickly add/delete what you hear (without removing the lists).

I have a 'Winter load' list (road dept for plowboys, LE, Fire) then a "Summer Load" (the same plus forestry and a LOT of other fire season stuff) and with a few button pushes, can change them.  To those, I can add other lists (next state over, more counties away) with button pushes.  Start slow, build on your new knowledge.

The group is here to assist you in understanding.

Rick NK7I


 

On 4/19/2020 7:45 PM, Fred Miller wrote:
If I were to buy one of these scanners, should I have Uniden program it? What do you think of their "Expert Programming Team"?


azpowells
 

 Wow Rick never explored sending Sentinel loads via E mail. Going to have to check this out. Thanks for the tip.


 Wayne Powell

On 4/20/2020 1:00 PM, Rick Bates, NK7I wrote:

I would start by finding someone local to you, then asking them for programming help.  One of the beauties of the Sentinel software, is that one can share programming loads via email.  It may be as simple as loading their programming.

That help may also be able to advise you, in person, in learning how to take care of it yourself.

Rick


On 4/20/2020 12:01 PM, barbara speir wrote:
I would GLADLY pay someone because I am not tech savvy and I am not getting full use of either of my scanners


On Mon, Apr 20, 2020 at 1:58 PM, JD
Why pay someone to program your scanner when that is the best way for you to familiarize yourself with it and learn how to navigate the systems and learn how to operate it? Seems difficult at first but like anything else you will learn it eventually. Then you will be able to streamline your programming efficiently and know how to navigate your FLs for maximum effect. I would never pay for anyone to program my scanners. Best way to learn them. I am old school (in my 60s) and knuckled down and learned the ins and outs of Sentinel and I am forever glad that I did. I own an SDS100 and a 200 and they are fantastic scanners. When I got my SDS100 I was stumped, like a hog staring at a stopwatch lol...but persistence and tenacity and patience was the key and now I am very proficient with both scanners. Do yourself a big favor and knuckle down and learn how to program your scanner yourself. You will  thank yourself later! Above all, have fun with it!

JD
kf4anc

On Monday, April 20, 2020, 12:47:53 PM EDT, Don Safer <dlsafer@...> wrote:


While I worked at Ham Radio Outlet, 2015 - 2018, we would "pre program" 436 and 536 for a fee.
 
Don
KC6IPO
==========================

---------- Original Message ----------
From: "Rick Bates, NK7I" <Rick.NK7I@...>
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden SDS100 and SDS200
Date: Mon, 20 Apr 2020 07:39:36 -0700

Fred,

Uniden won't program it, but sales shops might for a fee.

All you have to know is the type of service that you want to hear and the zip code you're in, then set a range (in miles) and you'll hear a lot.

And if it plays too much or not enough of the right thing, you'd have to ship it off for weeks and spend still more money.  It's time to learn something new.

You can make a list of the specifics of what you want to hear and remove what you don't.  Using the programming software (which updates and uses a complete database), it's not that hard.  Create a list of what you want, push it into the scanner, listen.

You can run multiple lists at the same time (Hometown Fire, Hometown LE, Local Trains etc.).  If that's still too much, there are ways to quickly add/delete what you hear (without removing the lists).

I have a 'Winter load' list (road dept for plowboys, LE, Fire) then a "Summer Load" (the same plus forestry and a LOT of other fire season stuff) and with a few button pushes, can change them.  To those, I can add other lists (next state over, more counties away) with button pushes.  Start slow, build on your new knowledge.

The group is here to assist you in understanding.

Rick NK7I


 

On 4/19/2020 7:45 PM, Fred Miller wrote:
If I were to buy one of these scanners, should I have Uniden program it? What do you think of their "Expert Programming Team"?


Rick NK7I
 

It has been some time since I’ve done that, but it works. 

Rick NK7I

Smell Czech corruptions are inevitable

On Apr 20, 2020, at 8:33 PM, azpowells <azpowells@...> wrote:



 Wow Rick never explored sending Sentinel loads via E mail. Going to have to check this out. Thanks for the tip.


 Wayne Powell

On 4/20/2020 1:00 PM, Rick Bates, NK7I wrote:

I would start by finding someone local to you, then asking them for programming help.  One of the beauties of the Sentinel software, is that one can share programming loads via email.  It may be as simple as loading their programming.

That help may also be able to advise you, in person, in learning how to take care of it yourself.

Rick


On 4/20/2020 12:01 PM, barbara speir wrote:
I would GLADLY pay someone because I am not tech savvy and I am not getting full use of either of my scanners


On Mon, Apr 20, 2020 at 1:58 PM, JD
Why pay someone to program your scanner when that is the best way for you to familiarize yourself with it and learn how to navigate the systems and learn how to operate it? Seems difficult at first but like anything else you will learn it eventually. Then you will be able to streamline your programming efficiently and know how to navigate your FLs for maximum effect. I would never pay for anyone to program my scanners. Best way to learn them. I am old school (in my 60s) and knuckled down and learned the ins and outs of Sentinel and I am forever glad that I did. I own an SDS100 and a 200 and they are fantastic scanners. When I got my SDS100 I was stumped, like a hog staring at a stopwatch lol...but persistence and tenacity and patience was the key and now I am very proficient with both scanners. Do yourself a big favor and knuckle down and learn how to program your scanner yourself. You will  thank yourself later! Above all, have fun with it!

JD
kf4anc

On Monday, April 20, 2020, 12:47:53 PM EDT, Don Safer <dlsafer@...> wrote:


While I worked at Ham Radio Outlet, 2015 - 2018, we would "pre program" 436 and 536 for a fee.
 
Don
KC6IPO
==========================

---------- Original Message ----------
From: "Rick Bates, NK7I" <Rick.NK7I@...>
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden SDS100 and SDS200
Date: Mon, 20 Apr 2020 07:39:36 -0700

Fred,

Uniden won't program it, but sales shops might for a fee.

All you have to know is the type of service that you want to hear and the zip code you're in, then set a range (in miles) and you'll hear a lot.

And if it plays too much or not enough of the right thing, you'd have to ship it off for weeks and spend still more money.  It's time to learn something new.

You can make a list of the specifics of what you want to hear and remove what you don't.  Using the programming software (which updates and uses a complete database), it's not that hard.  Create a list of what you want, push it into the scanner, listen.

You can run multiple lists at the same time (Hometown Fire, Hometown LE, Local Trains etc.).  If that's still too much, there are ways to quickly add/delete what you hear (without removing the lists).

I have a 'Winter load' list (road dept for plowboys, LE, Fire) then a "Summer Load" (the same plus forestry and a LOT of other fire season stuff) and with a few button pushes, can change them.  To those, I can add other lists (next state over, more counties away) with button pushes.  Start slow, build on your new knowledge.

The group is here to assist you in understanding.

Rick NK7I


 

On 4/19/2020 7:45 PM, Fred Miller wrote:
If I were to buy one of these scanners, should I have Uniden program it? What do you think of their "Expert Programming Team"?


robertwichert
 

The BC 246 allows me to LO (lock out) signals if I don’t want to hear “too much”.


Robert P. Wichert P.Eng. 
LEED AP BD&C
HERS I & HERS II
CEPE & CEA RES & NON-RES
+1 916 966 9060
FAX +1 916 966 9068

On Apr 20, 2020, at 8:33 PM, azpowells <azpowells@...> wrote:



 Wow Rick never explored sending Sentinel loads via E mail. Going to have to check this out. Thanks for the tip.


 Wayne Powell

On 4/20/2020 1:00 PM, Rick Bates, NK7I wrote:

I would start by finding someone local to you, then asking them for programming help.  One of the beauties of the Sentinel software, is that one can share programming loads via email.  It may be as simple as loading their programming.

That help may also be able to advise you, in person, in learning how to take care of it yourself.

Rick


On 4/20/2020 12:01 PM, barbara speir wrote:
I would GLADLY pay someone because I am not tech savvy and I am not getting full use of either of my scanners


On Mon, Apr 20, 2020 at 1:58 PM, JD
Why pay someone to program your scanner when that is the best way for you to familiarize yourself with it and learn how to navigate the systems and learn how to operate it? Seems difficult at first but like anything else you will learn it eventually. Then you will be able to streamline your programming efficiently and know how to navigate your FLs for maximum effect. I would never pay for anyone to program my scanners. Best way to learn them. I am old school (in my 60s) and knuckled down and learned the ins and outs of Sentinel and I am forever glad that I did. I own an SDS100 and a 200 and they are fantastic scanners. When I got my SDS100 I was stumped, like a hog staring at a stopwatch lol...but persistence and tenacity and patience was the key and now I am very proficient with both scanners. Do yourself a big favor and knuckle down and learn how to program your scanner yourself. You will  thank yourself later! Above all, have fun with it!

JD
kf4anc

On Monday, April 20, 2020, 12:47:53 PM EDT, Don Safer <dlsafer@...> wrote:


While I worked at Ham Radio Outlet, 2015 - 2018, we would "pre program" 436 and 536 for a fee.
 
Don
KC6IPO
==========================

---------- Original Message ----------
From: "Rick Bates, NK7I" <Rick.NK7I@...>
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden SDS100 and SDS200
Date: Mon, 20 Apr 2020 07:39:36 -0700

Fred,

Uniden won't program it, but sales shops might for a fee.

All you have to know is the type of service that you want to hear and the zip code you're in, then set a range (in miles) and you'll hear a lot.

And if it plays too much or not enough of the right thing, you'd have to ship it off for weeks and spend still more money.  It's time to learn something new.

You can make a list of the specifics of what you want to hear and remove what you don't.  Using the programming software (which updates and uses a complete database), it's not that hard.  Create a list of what you want, push it into the scanner, listen.

You can run multiple lists at the same time (Hometown Fire, Hometown LE, Local Trains etc.).  If that's still too much, there are ways to quickly add/delete what you hear (without removing the lists).

I have a 'Winter load' list (road dept for plowboys, LE, Fire) then a "Summer Load" (the same plus forestry and a LOT of other fire season stuff) and with a few button pushes, can change them.  To those, I can add other lists (next state over, more counties away) with button pushes.  Start slow, build on your new knowledge.

The group is here to assist you in understanding.

Rick NK7I


 

On 4/19/2020 7:45 PM, Fred Miller wrote:
If I were to buy one of these scanners, should I have Uniden program it? What do you think of their "Expert Programming Team"?


azpowells
 

Something to investigate with the down time. Be safe. Thanks.

 Wayne

On 4/20/2020 8:37 PM, Rick Bates, NK7I wrote:

It has been some time since I’ve done that, but it works. 

Rick NK7I

Smell Czech corruptions are inevitable

On Apr 20, 2020, at 8:33 PM, azpowells <azpowells@...> wrote:



 Wow Rick never explored sending Sentinel loads via E mail. Going to have to check this out. Thanks for the tip.


 Wayne Powell

On 4/20/2020 1:00 PM, Rick Bates, NK7I wrote:

I would start by finding someone local to you, then asking them for programming help.  One of the beauties of the Sentinel software, is that one can share programming loads via email.  It may be as simple as loading their programming.

That help may also be able to advise you, in person, in learning how to take care of it yourself.

Rick


On 4/20/2020 12:01 PM, barbara speir wrote:
I would GLADLY pay someone because I am not tech savvy and I am not getting full use of either of my scanners


On Mon, Apr 20, 2020 at 1:58 PM, JD
Why pay someone to program your scanner when that is the best way for you to familiarize yourself with it and learn how to navigate the systems and learn how to operate it? Seems difficult at first but like anything else you will learn it eventually. Then you will be able to streamline your programming efficiently and know how to navigate your FLs for maximum effect. I would never pay for anyone to program my scanners. Best way to learn them. I am old school (in my 60s) and knuckled down and learned the ins and outs of Sentinel and I am forever glad that I did. I own an SDS100 and a 200 and they are fantastic scanners. When I got my SDS100 I was stumped, like a hog staring at a stopwatch lol...but persistence and tenacity and patience was the key and now I am very proficient with both scanners. Do yourself a big favor and knuckle down and learn how to program your scanner yourself. You will  thank yourself later! Above all, have fun with it!

JD
kf4anc

On Monday, April 20, 2020, 12:47:53 PM EDT, Don Safer <dlsafer@...> wrote:


While I worked at Ham Radio Outlet, 2015 - 2018, we would "pre program" 436 and 536 for a fee.
 
Don
KC6IPO
==========================

---------- Original Message ----------
From: "Rick Bates, NK7I" <Rick.NK7I@...>
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden SDS100 and SDS200
Date: Mon, 20 Apr 2020 07:39:36 -0700

Fred,

Uniden won't program it, but sales shops might for a fee.

All you have to know is the type of service that you want to hear and the zip code you're in, then set a range (in miles) and you'll hear a lot.

And if it plays too much or not enough of the right thing, you'd have to ship it off for weeks and spend still more money.  It's time to learn something new.

You can make a list of the specifics of what you want to hear and remove what you don't.  Using the programming software (which updates and uses a complete database), it's not that hard.  Create a list of what you want, push it into the scanner, listen.

You can run multiple lists at the same time (Hometown Fire, Hometown LE, Local Trains etc.).  If that's still too much, there are ways to quickly add/delete what you hear (without removing the lists).

I have a 'Winter load' list (road dept for plowboys, LE, Fire) then a "Summer Load" (the same plus forestry and a LOT of other fire season stuff) and with a few button pushes, can change them.  To those, I can add other lists (next state over, more counties away) with button pushes.  Start slow, build on your new knowledge.

The group is here to assist you in understanding.

Rick NK7I


 

On 4/19/2020 7:45 PM, Fred Miller wrote:
If I were to buy one of these scanners, should I have Uniden program it? What do you think of their "Expert Programming Team"?


barbara speir
 

Thank you so very much!! I am in Mississippi, and I may just take you up on that


On Mon, Apr 20, 2020 at 8:48 PM, Maggie/Tom O’Connor
<Maggie-o@...> wrote:
Hi Barbara,
Rick is right – I did both things he mentioned – found someone close to me to show me how to use the software (and I am a techy but still needed help) and he gave me, which I still use, some of his favorites lists.  For someone to show you the software – they don’t even have to be near you – you can share your computer screen easily these days.  I don’t know where you are, but I’d be happy to help – IF... It’s the Sentinel Software for these models.  I have the 436 and it was a huge learning curve for me, and I’m ashamed of how much (easy stuff) I still can’t do – and work around (by still using an old scanner) – even with all the tons of help here on the group.
 
Let me know if I can be of any help to you.  I’m in Mass – but again – I could give you a quick overview of the software.. just the basics, but that’s been working for me on the 436 for years!
 
- Maggie
 
Sent: Monday, April 20, 2020 4:00 PM
Subject: Re: [Uniden] Uniden SDS100 and SDS200
 

I would start by finding someone local to you, then asking them for programming help.  One of the beauties of the Sentinel software, is that one can share programming loads via email.  It may be as simple as loading their programming.

That help may also be able to advise you, in person, in learning how to take care of it yourself.

Rick


On 4/20/2020 12:01 PM, barbara speir wrote:
I would GLADLY pay someone because I am not tech savvy and I am not getting full use of either of my scanners


On Mon, Apr 20, 2020 at 1:58 PM, JD
Why pay someone to program your scanner when that is the best way for you to familiarize yourself with it and learn how to navigate the systems and learn how to operate it? Seems difficult at first but like anything else you will learn it eventually. Then you will be able to streamline your programming efficiently and know how to navigate your FLs for maximum effect. I would never pay for anyone to program my scanners. Best way to learn them. I am old school (in my 60s) and knuckled down and learned the ins and outs of Sentinel and I am forever glad that I did. I own an SDS100 and a 200 and they are fantastic scanners. When I got my SDS100 I was stumped, like a hog staring at a stopwatch lol...but persistence and tenacity and patience was the key and now I am very proficient with both scanners. Do yourself a big favor and knuckle down and learn how to program your scanner yourself. You will  thank yourself later! Above all, have fun with it!
 
JD
kf4anc
 
On Monday, April 20, 2020, 12:47:53 PM EDT, Don Safer mailto:dlsafer@... wrote:
 
 
While I worked at Ham Radio Outlet, 2015 - 2018, we would "pre program" 436 and 536 for a fee.
 
Don
KC6IPO
==========================

---------- Original Message ----------
From: "Rick Bates, NK7I" mailto:Rick.NK7I@...
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden SDS100 and SDS200
Date: Mon, 20 Apr 2020 07:39:36 -0700

Fred,

Uniden won't program it, but sales shops might for a fee.

All you have to know is the type of service that you want to hear and the zip code you're in, then set a range (in miles) and you'll hear a lot.

And if it plays too much or not enough of the right thing, you'd have to ship it off for weeks and spend still more money.  It's time to learn something new.

You can make a list of the specifics of what you want to hear and remove what you don't.  Using the programming software (which updates and uses a complete database), it's not that hard.  Create a list of what you want, push it into the scanner, listen.

You can run multiple lists at the same time (Hometown Fire, Hometown LE, Local Trains etc.).  If that's still too much, there are ways to quickly add/delete what you hear (without removing the lists).

I have a 'Winter load' list (road dept for plowboys, LE, Fire) then a "Summer Load" (the same plus forestry and a LOT of other fire season stuff) and with a few button pushes, can change them.  To those, I can add other lists (next state over, more counties away) with button pushes.  Start slow, build on your new knowledge.

The group is here to assist you in understanding.

Rick NK7I


 

On 4/19/2020 7:45 PM, Fred Miller wrote:
If I were to buy one of these scanners, should I have Uniden program it? What do you think of their "Expert Programming Team"?