SDS-100
|
harvey morse
Hello All,
I just purchased an SDS-100. The selling dealer set up four “banks” for me, two for FL and two for NC. Can anyone please tell me how to turn off the two FL banks when I am in NC and vice-versa as I go back and forth? I have looked at the instruction manual and it is way over my comprehgension level.
You’re assistance is greatly appreciated.
Thanks so much!
Harvey K1DJG?
|
|
|
|
Joe M.
Just hit the FL Quick Keys they set up and hit ENTER.
toggle quoted messageShow quoted text
For example, if they set them up as FLQK 1/2 for FL, and 3/4 for NC, hit 3 ENTER 4 ENTER to enable or disable NC. Exactly what they are depends on how they programmed it. Or you can use the menu to SET SCAN SELECTION and enable/disable them that way. Joe M.
On 6/6/2020 8:59 AM, harvey morse wrote:
Hello All,
|
|
|
|
harvey morse
Thank you Joe! Very much appreciated!
Harvey
From: <main@Uniden.groups.io> on behalf of "Joe M. via groups.io" <mch@...>
Just hit the FL Quick Keys they set up and hit ENTER.
For example, if they set them up as FLQK 1/2 for FL, and 3/4 for NC, hit 3 ENTER 4 ENTER to enable or disable NC. Exactly what they are depends on how they programmed it.
Or you can use the menu to SET SCAN SELECTION and enable/disable them that way.
Joe M.
On 6/6/2020 8:59 AM, harvey morse wrote:
|
|
|
|
John Irvine
Push the Menu button, the one with 3 red lines on it on the left side of the SDS100 On the screen you will now see Menu. Turn the button on top to highlight Set Scan Selection and push down. Now turn the button to Select Lists to Monitor and push down. Now turn the button to the various lists you want to turn on or off and push down turning the selection on or off and push. Push the Menu button with the 3 red lines on it one more time - and you have set the programs. John from Concord, CA.
On Saturday, June 6, 2020, 6:06:46 AM PDT, Joe M. <mch@...> wrote:
Just hit the FL Quick Keys they set up and hit ENTER. For example, if they set them up as FLQK 1/2 for FL, and 3/4 for NC, hit 3 ENTER 4 ENTER to enable or disable NC. Exactly what they are depends on how they programmed it. Or you can use the menu to SET SCAN SELECTION and enable/disable them that way. Joe M. On 6/6/2020 8:59 AM, harvey morse wrote: > Hello All, > > I just purchased an SDS-100. The selling dealer set up four “banks” for > me, two for FL and two for NC. Can anyone please tell me how to turn off > the two FL banks when I am in NC and vice-versa as I go back and forth? > I have looked at the instruction manual and it is way over my > comprehgension level. > > You’re assistance is greatly appreciated. > > Thanks so much! > > Harvey > > K1DJG? > > > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > Virus-free. www.avg.com > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > > > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> >
|
|
|
|
John Svensson
When in doubt, check google, I’m sure there are YOUTUBE videos on this subject. I learned more from the internet for programming my 436 than I ever did from reading the owners manual..
John
From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of harvey morse
Sent: Saturday, June 6, 2020 07:54 To: main@Uniden.groups.io Subject: Re: [Uniden] SDS-100
Thank you Joe! Very much appreciated!
Harvey
From: <main@Uniden.groups.io> on behalf of "Joe M. via groups.io" <mch@...>
Just hit the FL Quick Keys they set up and hit ENTER.
For example, if they set them up as FLQK 1/2 for FL, and 3/4 for NC, hit 3 ENTER 4 ENTER to enable or disable NC. Exactly what they are depends on how they programmed it.
Or you can use the menu to SET SCAN SELECTION and enable/disable them that way.
Joe M.
On 6/6/2020 8:59 AM, harvey morse wrote:
|
|
|
|
harvey morse
Awesome John! That was perfect. Thank you.
Harvey K1DJG
From: <main@Uniden.groups.io> on behalf of "John Irvine via groups.io" <chasebiz@...>
Push the Menu button, the one with 3 red lines on it on the left side of the SDS100 On the screen you will now see Menu. Turn the button on top to highlight Set Scan Selection and push down. Now turn the button to Select Lists to Monitor and push down. Now turn the button to the various lists you want to turn on or off and push down turning the selection on or off and push. Push the Menu button with the 3 red lines on it one more time - and you have set the programs.
John from Concord, CA.
On Saturday, June 6, 2020, 6:06:46 AM PDT, Joe M. <mch@...> wrote:
Just hit the FL Quick Keys they set up and hit ENTER.
|
|
|
|
harvey morse
Thank you!
Harvey K1DJG
From: <main@Uniden.groups.io> on behalf of "John Svensson via groups.io" <jsven2@...>
When in doubt, check google, I’m sure there are YOUTUBE videos on this subject. I learned more from the internet for programming my 436 than I ever did from reading the owners manual..
John
From: main@Uniden.groups.io <main@Uniden.groups.io>
On Behalf Of harvey morse
Sent: Saturday, June 6, 2020 07:54 To: main@Uniden.groups.io Subject: Re: [Uniden] SDS-100
Thank you Joe! Very much appreciated!
Harvey
From: <main@Uniden.groups.io> on behalf of "Joe M. via groups.io" <mch@...>
Just hit the FL Quick Keys they set up and hit ENTER.
For example, if they set them up as FLQK 1/2 for FL, and 3/4 for NC, hit 3 ENTER 4 ENTER to enable or disable NC. Exactly what they are depends on how they programmed it.
Or you can use the menu to SET SCAN SELECTION and enable/disable them that way.
Joe M.
On 6/6/2020 8:59 AM, harvey morse wrote:
|
|
|