Date
1 - 10 of 10
SDS200 cable driver- USB?
|
Steve Garwood
Can anyone give me any information as to getting ahold of a software driver for the SDS200 cable driver software? Not having luck so far.
Thanks! Steve Sent from my iPhone 8 Plus |
|
|
|
Joe M.
It should be in just about any version of
toggle quoted message
Show quoted text
Windows. It's a standard flash drive driver. If it's not showing properly in Device Manager remove the device and then unplug/plug and let Windows install it again. Joe M. On 4/9/2020 6:54 PM, Steve Garwood wrote:
Can anyone give me any information as to getting ahold of a software driver for the SDS200 cable driver software? Not having luck so far. |
|
|
|
I never had to do any type of driver down load.
toggle quoted message
Show quoted text
-----Original Message-----
From: main@Uniden.groups.io On Behalf Of Steve Garwood Sent: Thursday, April 9, 2020 18:54 To: main@Uniden.groups.io Subject: [Uniden] SDS200 cable driver- USB? Can anyone give me any information as to getting ahold of a software driver for the SDS200 cable driver software? Not having luck so far. Thanks! Steve Sent from my iPhone 8 Plus |
|
|
|
Byron Myers
It looks like there isn’t any driver software for it. I checked Scanner master website , they have the cable , but without a cd . I believe if it did have driver included it would be sold with it. It most likely is preloaded on windows
toggle quoted message
Show quoted text
On Apr 9, 2020, at 19:22, Joe M. <mch@...> wrote: |
|
|
|
kline Rick
perhaps this will help
toggle quoted message
Show quoted text
https://www.scannermaster.com/driver_installation_uniden_police_scanners_a/385.htm https://www.scannermaster.com/police_scanner_software_downloads_a/214.htm towards the bottom of this page is instructions on a usb cable driver https://www.scannermaster.com/USB_Cable_p/01-551038.htm On 4/9/2020 6:54 PM, Steve Garwood wrote:
software driver for the SDS200 cable driver |
|
|
|
Bernard Skoch
Steve,
toggle quoted message
Show quoted text
What version of Windows are you running? Bernie On Apr 10, 2020, at 00:42, Byron Myers via groups.io <emtd99@...> wrote: |
|
|
|
Joe M.
Link 1 is for the serial comms drivers.
toggle quoted message
Show quoted text
Link 2 is for a Radio Shack cable. Link 3 is for the USB-1. None of them are for the SDS series. Joe M. On 4/10/2020 6:15 AM, kline Rick via groups.io wrote:
perhaps this will help |
|
|
|
Steve Garwood
Bernie,
toggle quoted message
Show quoted text
I first tried Windows 7, I was able to download and run the driver on the Uniden website, might have been the ScannerMaster site. This finally worked, but I was unable to see the micro SD card. I switched to a Windows 10 laptop... still had to manually download the driver. Still not able to see the micro SD card. Both were Panasonic Toughbooks. Switched to a ruggedized Dell Windows 7 laptop... again had to download the driver, as the automatic process didn’t find anything. With the Dell, I was able to see the the micro SD and run through the firmware and database up processes. Don’t know why it has been so difficult. And thanks to all that got me headed in the right direction! Steve On Apr 10, 2020, at 08:13, Bernard Skoch via groups.io <k5xs@...> wrote: |
|
|
|
Joe M.
The fact that your Windows PCs are having trouble installing a simple flash drive driver implies there are issues with the installation.
toggle quoted message
Show quoted text
Go into Device Manager, remove whatever drivers are installed, then unplug the scanner, wait 8 seconds, plug it in again and hope the PC will install the correct drivers. If it cannot there is an issue with that PC or the Windows installation. Make sure Windows is up to date. There is nothing unique about the scanner driver. It appears to be a simple flash drive to the PC. Joe M. On 4/10/2020 9:29 PM, Steve Garwood wrote:
Bernie, |
|
|
|
Bernard Skoch
Steve,
toggle quoted message
Show quoted text
I have found that on my CF-53 Toughbook all USB ports are not the same. Have you tried different ports? Bernie On Apr 10, 2020, at 23:23, Steve Garwood <n0czv@...> wrote: |
|
|