No sound on search results.


Evan Platt
 

Potentially it's either a control channel, or encrypted.

On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
<wkevinm=yahoo.ca@groups.io> wrote:

Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.


Kev Myles
 

Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.

On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@espphotography.com> wrote:

Potentially it's either a control channel, or encrypted.

On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
<wkevinm=yahoo.ca@groups.io> wrote:

Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.




Evan Platt
 

I believe encrypted traffic would be silent / no sound. Control
channel I can't recall what you'd hear, if anything.

On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io
<wkevinm=yahoo.ca@groups.io> wrote:

Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@espphotography.com> wrote:

Potentially it's either a control channel, or encrypted.

On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
<wkevinm=yahoo.ca@groups.io> wrote:

Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.








Kev Myles
 

Ok, I see. I though there would be a tone, or noise of some sort. I noticed in the TRX1 manual on page 61 that the ADC and DAC default settings are+0dB and DSP Level Adapt is 64 so I just reset it to those values.

On Apr 15, 2021, at 4:57 PM, Evan Platt <evan@espphotography.com> wrote:

I believe encrypted traffic would be silent / no sound. Control
channel I can't recall what you'd hear, if anything.

On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io
<wkevinm=yahoo.ca@groups.io> wrote:

Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@espphotography.com> wrote:

Potentially it's either a control channel, or encrypted.

On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
<wkevinm=yahoo.ca@groups.io> wrote:

Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.











Joe M.
 

On control channels you hear nothing. You see the color
code, and usually the slot flashes between 1 and 2.

Joe M.

On 4/15/2021 3:27 PM, Evan Platt wrote:
I believe encrypted traffic would be silent / no sound. Control
channel I can't recall what you'd hear, if anything.

On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io
<wkevinm=yahoo.ca@groups.io> wrote:

Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@espphotography.com> wrote:

Potentially it's either a control channel, or encrypted.

On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
<wkevinm=yahoo.ca@groups.io> wrote:

Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.











Tommy Long
 

on my scanner it make a bunch of noise .

------ Original Message ------
From: "Evan Platt" <evan@espphotography.com>
To: main@uniden.groups.io
Sent: 4/15/2021 2:27:46 PM
Subject: Re: [Uniden] No sound on search results.

I believe encrypted traffic would be silent / no sound. Control
channel I can't recall what you'd hear, if anything.

On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io
<wkevinm=yahoo.ca@groups.io> wrote:

Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
> On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@espphotography.com> wrote:
>
> Potentially it's either a control channel, or encrypted.
>
> On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
> <wkevinm=yahoo.ca@groups.io> wrote:
>>
>> Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.
>>
>
>
>
>
>









Kev Myles
 

I made a few adjustments and it seems to be working a lot better now. Unchecked the boxes in Limit search from P25, NXDN, etc., set the Adc and Dac to default values. I set the dsp to default 64.

On Apr 15, 2021, at 5:39 PM, Tommy Long <tjl1960@gmail.com> wrote:

on my scanner it make a bunch of noise .

------ Original Message ------
From: "Evan Platt" <evan@espphotography.com>
To: main@uniden.groups.io
Sent: 4/15/2021 2:27:46 PM
Subject: Re: [Uniden] No sound on search results.

I believe encrypted traffic would be silent / no sound. Control
channel I can't recall what you'd hear, if anything.

On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io
<wkevinm=yahoo.ca@groups.io> wrote:

Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@espphotography.com> wrote:

Potentially it's either a control channel, or encrypted.

On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
<wkevinm=yahoo.ca@groups.io> wrote:

Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.















Evan Platt
 

On which? DMR? You shouldn't hear anything on encrypted or a DMR
control channel - unless you don't have the DMR activated.

On Thu, Apr 15, 2021 at 1:53 PM Tommy Long <tjl1960@gmail.com> wrote:

on my scanner it make a bunch of noise .

------ Original Message ------
From: "Evan Platt" <evan@espphotography.com>
To: main@uniden.groups.io
Sent: 4/15/2021 2:27:46 PM
Subject: Re: [Uniden] No sound on search results.

I believe encrypted traffic would be silent / no sound. Control
channel I can't recall what you'd hear, if anything.

On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io
<wkevinm=yahoo.ca@groups.io> wrote:

Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
> On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@espphotography.com> wrote:
>
> Potentially it's either a control channel, or encrypted.
>
> On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
> <wkevinm=yahoo.ca@groups.io> wrote:
>>
>> Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.
>>
>
>
>
>
>













Kev Myles
 

I was hearing voices on 854.8125 yesterday and the day before, but today silence and after a little while a steady buzzing noise. Control channel? Didn’t pick up any other 800 MHz frequencies for the short time I was at that particular location.

On Apr 16, 2021, at 12:12 PM, Evan Platt <evan@espphotography.com> wrote:

On which? DMR? You shouldn't hear anything on encrypted or a DMR
control channel - unless you don't have the DMR activated.


On Thu, Apr 15, 2021 at 1:53 PM Tommy Long <tjl1960@gmail.com> wrote:

on my scanner it make a bunch of noise .

------ Original Message ------
From: "Evan Platt" <evan@espphotography.com>
To: main@uniden.groups.io
Sent: 4/15/2021 2:27:46 PM
Subject: Re: [Uniden] No sound on search results.

I believe encrypted traffic would be silent / no sound. Control
channel I can't recall what you'd hear, if anything.

On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io
<wkevinm=yahoo.ca@groups.io> wrote:

Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@espphotography.com> wrote:

Potentially it's either a control channel, or encrypted.

On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
<wkevinm=yahoo.ca@groups.io> wrote:

Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.


















Glenn "Butch" Kanvick
 

On some systems the Control Channel changes frequencies, sometimes everyday, sometimes at midnight.

On Fri, Apr 16, 2021 at 3:26 PM Kev Myles via groups.io <wkevinm=yahoo.ca@groups.io> wrote:

I was hearing voices on 854.8125 yesterday and the day before, but today silence and after a little while a steady buzzing noise. Control channel? Didn’t pick up any other 800 MHz frequencies for the short time I was at that particular location.
> On Apr 16, 2021, at 12:12 PM, Evan Platt <evan@...> wrote:
>
> On which? DMR? You shouldn't hear anything on encrypted or a DMR
> control channel - unless you don't have the DMR activated.
>
>
>> On Thu, Apr 15, 2021 at 1:53 PM Tommy Long <tjl1960@...> wrote:
>>
>> on my scanner it make a bunch  of noise .
>>
>> ------ Original Message ------
>> From: "Evan Platt" <evan@...>
>> To: main@uniden.groups.io
>> Sent: 4/15/2021 2:27:46 PM
>> Subject: Re: [Uniden] No sound on search results.
>>
>>> I believe encrypted traffic would be silent / no sound. Control
>>> channel I can't recall what you'd hear, if anything.
>>>
>>> On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io
>>> <wkevinm=yahoo.ca@groups.io> wrote:
>>>>
>>>> Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
>>>>> On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@...> wrote:
>>>>>
>>>>> Potentially it's either a control channel, or encrypted.
>>>>>
>>>>> On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
>>>>> <wkevinm=yahoo.ca@groups.io> wrote:
>>>>>>
>>>>>> Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example;  Slot: 1  Color: 7, or Slot: 2  Color: 4. No Sound, or talking. Are there any settings I need to change?  Thanks in advance.
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>








--
Glenn (Butch) Kanvick
KE7FEL/R
1-406-655-1232
 


Kev Myles
 

No it’s not encrypted. My TRX1 is decoding the frequencies perfect, but my 996P2 scanner is quiet on the same frequencies 854 to 856 range. In the settings it is telling me that DMR and Provoice have been activated, but I am not hearing any voice traffic unlike the TRX1. I bought the 996P2 used with the DMR and Provoice already activated. Any idea what could be the problem with my Uniden 996P2? Any help/Advice much appreciated.


Joe M.
 

Is the channel set for analog only?

Joe M.

On 4/29/2021 7:16 PM, Kev Myles via groups.io wrote:
No it’s not encrypted. My TRX1 is decoding the frequencies perfect, but
my 996P2 scanner is quiet on the same frequencies 854 to 856 range. In
the settings it is telling me that DMR and Provoice have been activated,
but I am not hearing any voice traffic unlike the TRX1. I bought the
996P2 used with the DMR and Provoice already activated. Any idea what
could be the problem with my Uniden 996P2? Any help/Advice much
appreciated.


Kev Myles
 

I programmed the System as a Conventional and set the Audio as Digital in the settings. Coming in loud and clear on the Uniden as well as the TRX1.

On May 7, 2021, at 4:52 PM, Joe M. <mch@nb.net> wrote:

Is the channel set for analog only?

Joe M.

On 4/29/2021 7:16 PM, Kev Myles via groups.io wrote:
No it’s not encrypted. My TRX1 is decoding the frequencies perfect, but
my 996P2 scanner is quiet on the same frequencies 854 to 856 range. In
the settings it is telling me that DMR and Provoice have been activated,
but I am not hearing any voice traffic unlike the TRX1. I bought the
996P2 used with the DMR and Provoice already activated. Any idea what
could be the problem with my Uniden 996P2? Any help/Advice much
appreciated.




Joe M.
 

Next question: Are you sure it is not trunked?

Joe M.

On 5/7/2021 9:57 PM, Kev Myles via groups.io wrote:
I programmed the System as a Conventional and set the Audio as Digital in the settings. Coming in loud and clear on the Uniden as well as the TRX1.
On May 7, 2021, at 4:52 PM, Joe M. <mch@nb.net> wrote:

Is the channel set for analog only?

Joe M.

On 4/29/2021 7:16 PM, Kev Myles via groups.io wrote:
No it’s not encrypted. My TRX1 is decoding the frequencies perfect, but
my 996P2 scanner is quiet on the same frequencies 854 to 856 range. In
the settings it is telling me that DMR and Provoice have been activated,
but I am not hearing any voice traffic unlike the TRX1. I bought the
996P2 used with the DMR and Provoice already activated. Any idea what
could be the problem with my Uniden 996P2? Any help/Advice much
appreciated.