bcd436hp
On Sun, Apr 5, 2020 at 6:36 PM, Adam J<neon_lights2007@...> wrote:My 536 is like that too although i just park on my fav channel and or the 536 will do id scan on nxdn and dmr which is nice with out it scanning my other banks. I have yet to try changing the "scanned banks" by pushing the numbers to select different banks for scanning but after reading some of Jims posts it appears very simple and easy.
Adam
From: main@Uniden.groups.io <main@Uniden.groups.io> on behalf of John Svensson via groups.io <jsven2@...>
Sent: Sunday, April 5, 2020 4:37:12 PM
To: main@Uniden.groups.io <main@Uniden.groups.io>
Subject: Re: [Uniden] BCD996TI never charge the batteries while they are in the scanner, one should always charge them in an external charger
John
From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Stevesweb
Sent: Sunday, April 5, 2020 04:52
To: main@Uniden.groups.io
Subject: Re: [Uniden] BCD996T
Just messing with you. Ive been working in computers and electronics since in my early teens ('70s). Dang I'm getting old.
I just remember using a 2.0A charger when I first bought my 436 and the battery compartment was very hot after a few hours (Why I looked at groups about heating issues). I started using 1.0A charger and it wouldn't get as hot. Just a personal observation. I recharge on a external charger now.
I was never able to find any amperage ratings for the 436, just voltage 5V ±5%.
Thanks for the info, have a good week. Be Safe!
On Sun, Apr 5, 2020 at 6:36 PM, Adam J<neon_lights2007@...> wrote:My 536 is like that too although i just park on my fav channel and or the 536 will do id scan on nxdn and dmr which is nice with out it scanning my other banks. I have yet to try changing the "scanned banks" by pushing the numbers to select different banks for scanning but after reading some of Jims posts it appears very simple and easy.
Adam
From: main@Uniden.groups.io <main@Uniden.groups.io> on behalf of John Svensson via groups.io <jsven2@...>
Sent: Sunday, April 5, 2020 4:37:12 PM
To: main@Uniden.groups.io <main@Uniden.groups.io>
Subject: Re: [Uniden] BCD996TI never charge the batteries while they are in the scanner, one should always charge them in an external charger
John
From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Stevesweb
Sent: Sunday, April 5, 2020 04:52
To: main@Uniden.groups.io
Subject: Re: [Uniden] BCD996T
Just messing with you. Ive been working in computers and electronics since in my early teens ('70s). Dang I'm getting old.
I just remember using a 2.0A charger when I first bought my 436 and the battery compartment was very hot after a few hours (Why I looked at groups about heating issues). I started using 1.0A charger and it wouldn't get as hot. Just a personal observation. I recharge on a external charger now.
I was never able to find any amperage ratings for the 436, just voltage 5V ±5%.
Thanks for the info, have a good week. Be Safe!
On Mon, Apr 6, 2020 at 3:54 AM, David O'Banion via groups.io<spacemissing@...> wrote:I doubt it.There is a Huge dfference between operating a conventional radio using software (as our Uniden scanners do)and having software that almost IS the radio (SDR).On Monday, April 6, 2020, 12:20:00 AM PDT, John Lewis via groups.io <jcl40511@...> wrote:Can bcd436hp be upgraded to Lesson nexedge what does it cost
On Sun, Apr 5, 2020 at 6:36 PM, Adam J<neon_lights2007@...> wrote:My 536 is like that too although i just park on my fav channel and or the 536 will do id scan on nxdn and dmr which is nice with out it scanning my other banks. I have yet to try changing the "scanned banks" by pushing the numbers to select different banks for scanning but after reading some of Jims posts it appears very simple and easy.
Adam
From: main@Uniden.groups.io <main@Uniden.groups.io> on behalf of John Svensson via groups.io <jsven2@...>
Sent: Sunday, April 5, 2020 4:37:12 PM
To: main@Uniden.groups.io <main@Uniden.groups.io>
Subject: Re: [Uniden] BCD996TI never charge the batteries while they are in the scanner, one should always charge them in an external charger
John
From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Stevesweb
Sent: Sunday, April 5, 2020 04:52
To: main@Uniden.groups.io
Subject: Re: [Uniden] BCD996T
Just messing with you. Ive been working in computers and electronics since in my early teens ('70s). Dang I'm getting old.
I just remember using a 2.0A charger when I first bought my 436 and the battery compartment was very hot after a few hours (Why I looked at groups about heating issues). I started using 1.0A charger and it wouldn't get as hot. Just a personal observation. I recharge on a external charger now.
I was never able to find any amperage ratings for the 436, just voltage 5V ±5%.
Thanks for the info, have a good week. Be Safe!
On Mon, Apr 6, 2020 at 2:23 PM, John Lewis via groups.io<jcl40511@...> wrote:Wh0at does it cost convenient listing to nexegde I have no Computer
On Mon, Apr 6, 2020 at 3:54 AM, David O'Banion via groups.io<spacemissing@...> wrote:I doubt it.There is a Huge dfference between operating a conventional radio using software (as our Uniden scanners do)and having software that almost IS the radio (SDR).On Monday, April 6, 2020, 12:20:00 AM PDT, John Lewis via groups.io <jcl40511@...> wrote:Can bcd436hp be upgraded to Lesson nexedge what does it cost
On Sun, Apr 5, 2020 at 6:36 PM, Adam J<neon_lights2007@...> wrote:My 536 is like that too although i just park on my fav channel and or the 536 will do id scan on nxdn and dmr which is nice with out it scanning my other banks. I have yet to try changing the "scanned banks" by pushing the numbers to select different banks for scanning but after reading some of Jims posts it appears very simple and easy.
Adam
From: main@Uniden.groups.io <main@Uniden.groups.io> on behalf of John Svensson via groups.io <jsven2@...>
Sent: Sunday, April 5, 2020 4:37:12 PM
To: main@Uniden.groups.io <main@Uniden.groups.io>
Subject: Re: [Uniden] BCD996TI never charge the batteries while they are in the scanner, one should always charge them in an external charger
John
From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Stevesweb
Sent: Sunday, April 5, 2020 04:52
To: main@Uniden.groups.io
Subject: Re: [Uniden] BCD996T
Just messing with you. Ive been working in computers and electronics since in my early teens ('70s). Dang I'm getting old.
I just remember using a 2.0A charger when I first bought my 436 and the battery compartment was very hot after a few hours (Why I looked at groups about heating issues). I started using 1.0A charger and it wouldn't get as hot. Just a personal observation. I recharge on a external charger now.
I was never able to find any amperage ratings for the 436, just voltage 5V ±5%.
Thanks for the info, have a good week. Be Safe!
Joe M.
Can anybody tell how turn up down the Volume i 436
On Wed, Apr 8, 2020 at 11:50 AM, Joe M.<mch@...> wrote:Press the scroll knob and twist it counter-clockwise.
Joe M.
On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
> Can anybody tell how turn up down the Volume i 436
press the scroll knob and twist it clockwise.
Joe M.
I don't know how to turn up and down thanks Joe
John wd4lew
<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
On Wed, Apr 8, 2020 at 11:50 AM, Joe M.
<mch@...> wrote:
Press the scroll knob and twist it counter-clockwise.
Joe M.
On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
> Can anybody tell how turn up down the Volume i 436
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
Tim
On Apr 8, 2020, at 11:10 AM, Joe M. <mch@...> wrote:
I told you how to turn it down. To turn it up
press the scroll knob and twist it clockwise.
Joe M.On 4/8/2020 11:57 AM, John Lewis via groups.io wrote:
I don't know how to turn up and down thanks Joe
John wd4lew
<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
On Wed, Apr 8, 2020 at 11:50 AM, Joe M.
<mch@...> wrote:
Press the scroll knob and twist it counter-clockwise.
Joe M.
On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
> Can anybody tell how turn up down the Volume i 436
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Apr 8, 2020, at 9:04 AM, John Lewis via groups.io <jcl40511@...> wrote:
On Wed, Apr 8, 2020 at 12:27 PM, Mark Lassman via groups.io<kb6kgx@...> wrote:Unless you’ve got Screen Lock on, in which case you do NOT have to press the knob down first. Just turn it.On Apr 8, 2020, at 9:04 AM, John Lewis via groups.io <jcl40511@...> wrote:
On Apr 8, 2020, at 9:04 AM, John Lewis via groups.io <jcl40511@...> wrote:
On Wed, Apr 8, 2020 at 12:49 PM, Edward Heim via groups.io<edward_heim@...> wrote:press squelch button down.Then you can turn volume up or down.Ed HeimOn Wednesday, April 8, 2020, 11:27:42 AM CDT, Mark Lassman via groups.io <kb6kgx@...> wrote:Unless you’ve got Screen Lock on, in which case you do NOT have to press the knob down first. Just turn it.On Apr 8, 2020, at 9:04 AM, John Lewis via groups.io <jcl40511@...> wrote:
Joe M.
How do u set the delay up up 3 to 5 Seconds
John
<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
On Wed, Apr 8, 2020 at 12:49 PM, Edward Heim via groups.io
<edward_heim@...> wrote:
press squelch button down.
Then you can turn volume up or down.
Ed Heim
On Wednesday, April 8, 2020, 11:27:42 AM CDT, Mark Lassman via
groups.io <kb6kgx@...> wrote:
Unless you’ve got Screen Lock on, in which case you do NOT have to
press the knob down first. Just turn it.On Apr 8, 2020, at 9:04 AM, John Lewis via groups.io<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
<jcl40511@...> wrote:
I don't know how to turn up and down thanks Joe
John wd4lew
<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
On Wed, Apr 8, 2020 at 11:50 AM, Joe M.
<mch@...> wrote:
Press the scroll knob and twist it counter-clockwise.
Joe M.
On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
> Can anybody tell how turn up down the Volume i 436
Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
S I G H .....
I told you how to turn it down. To turn it up
press the scroll knob and twist it clockwise.
Joe M.
On 4/8/2020 11:57 AM, John Lewis via groups.io wrote:
I don't know how to turn up and down thanks Joe
John wd4lew
<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
On Wed, Apr 8, 2020 at 11:50 AM, Joe M.
<mch@...> wrote:
Press the scroll knob and twist it counter-clockwise.
Joe M.
On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
> Can anybody tell how turn up down the Volume i 436
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
On Apr 8, 2020, at 4:05 PM, azpowells <azpowells@...> wrote:
S I G H .....
On 4/8/2020 9:09 AM, Joe M. wrote:
I told you how to turn it down. To turn it up
press the scroll knob and twist it clockwise.
Joe M.
On 4/8/2020 11:57 AM, John Lewis via groups.io wrote:
I don't know how to turn up and down thanks Joe
John wd4lew
<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
On Wed, Apr 8, 2020 at 11:50 AM, Joe M.
<mch@...> wrote:
Press the scroll knob and twist it counter-clockwise.
Joe M.
On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
> Can anybody tell how turn up down the Volume i 436
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
Help I have a Homepatrol 2 that has a sd card error what do I need to do?
Roger eaton
Sent from Mail for Windows 10
Sentinel, then reload your programming.
You can first try to remove and re-seat
the card, but likely it needs replaced.
Joe M.
Help I have a Homepatrol 2 that has a sd card error what do I need to do?
Roger eaton
Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows 10
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>
Virus-free. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
Sent: Wednesday, April 8, 2020 8:49 PM
To: main@uniden.groups.io
Subject: Re: [Uniden] bcd436hp
Replace the card, CLEAR USER DATA in
Sentinel, then reload your programming.
You can first try to remove and re-seat
the card, but likely it needs replaced.
Joe M.
On 4/8/2020 8:46 PM, ROGER EATON wrote:
> Help I have a Homepatrol 2 that has a sd card error what do I need to do?
>
> Roger eaton
>
> Sent from Mail <https://go.microsoftcom/fwlink/?LinkId=550986> for
> Windows 10
>
>
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>
> Virus-free. www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>
>
>
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
(note: you can go larger if you record on it - for larger storage)
Joe M.
Thanks clearing the user data worked
Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows 10
*From: *Joe M. <mailto:mch@...>
*Sent: *Wednesday, April 8, 2020 8:49 PM
*To: *main@uniden.groups.io <mailto:main@uniden.groups.io>
*Subject: *Re: [Uniden] bcd436hp
Replace the card, CLEAR USER DATA in
Sentinel, then reload your programming.
You can first try to remove and re-seat
the card, but likely it needs replaced.
Joe M.
On 4/8/2020 8:46 PM, ROGER EATON wrote:
> Help I have a Homepatrol 2 that has a sd card error what do I need to do?
>
> Roger eaton
>
> Sent from Mail <https://go.microsoftcom/fwlink/?LinkId=550986> for
> Windows 10
>
>
>
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>
> Virus-free. www.avast.com
>
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>
>
>
> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
Again Thanks for the help. Do you know anything about Columbus Ohio police
Sent from Mail for Windows 10
Sent: Wednesday, April 8, 2020 9:06 PM
To: main@uniden.groups.io
Subject: Re: [Uniden] bcd436hp
If this is on the same card, I would get another one as a back-up ASAP.
(note: you can go larger if you record on it - for larger storage)
Joe M.
On 4/8/2020 9:01 PM, ROGER EATON wrote:
> Thanks clearing the user data worked
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
> *From: *Joe M. <mailto:mch@...>
> *Sent: *Wednesday, April 8, 2020 8:49 PM
> *To: *main@uniden.groups.io <mailto:main@uniden.groups.io>
> *Subject: *Re: [Uniden] bcd436hp
>
> Replace the card, CLEAR USER DATA in
>
> Sentinel, then reload your programming.
>
> You can first try to remove and re-seat
>
> the card, but likely it needs replaced.
>
> Joe M.
>
> On 4/8/2020 8:46 PM, ROGER EATON wrote:
>
> > Help I have a Homepatrol 2 that has a sd card error what do I need to do?
>
> >
>
> > Roger eaton
>
> >
>
> > Sent from Mail <https://go.microsoftcom/fwlink/?LinkId=550986> for
>
> > Windows 10
>
> >
>
> >
>
> >
> <https://wwwavast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>
>
> > Virus-free. www.avast.com
>
> >
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>
>
> >
>
> >
>
> > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> >
>
>