main@Uniden.groups.io

John Lewis

#514

Can bcd436hp be upgraded to Lesson nexedge what does it cost

Show quoted text

On Sun, Apr 5, 2020 at 6:36 PM, Adam J
<neon_lights2007@...> wrote:

My 536 is like that too although i just park on my fav channel and or the 536 will do id scan on nxdn and dmr which is nice with out it scanning my other banks. I have yet to try changing the "scanned banks" by pushing the numbers to select different banks for scanning but after reading some of Jims posts it appears very simple and easy.

Adam

Sent from Outlook Mobile

From: main@Uniden.groups.io <main@Uniden.groups.io> on behalf of John Svensson via groups.io <jsven2@...>
Sent: Sunday, April 5, 2020 4:37:12 PM
To: main@Uniden.groups.io <main@Uniden.groups.io>
Subject: Re: [Uniden] BCD996T

I never charge the batteries while they are in the scanner, one should always charge them in an external charger

John

From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Stevesweb
Sent: Sunday, April 5, 2020 04:52
To: main@Uniden.groups.io
Subject: Re: [Uniden] BCD996T

Just messing with you. Ive been working in computers and electronics since in my early teens ('70s). Dang I'm getting old.

I just remember using a 2.0A charger when I first bought my 436 and the battery compartment was very hot after a few hours (Why I looked at groups about heating issues). I started using 1.0A charger and it wouldn't get as hot. Just a personal observation. I recharge on a external charger now.

I was never able to find any amperage ratings for the 436, just voltage 5V ±5%.

Thanks for the info, have a good week. Be Safe!

David O'Banion

#516

I doubt it.

There is a Huge dfference between operating a conventional radio using software (as our Uniden scanners do)

and having software that almost IS the radio (SDR).

Show quoted text

On Monday, April 6, 2020, 12:20:00 AM PDT, John Lewis via groups.io <jcl40511@...> wrote:

Can bcd436hp be upgraded to Lesson nexedge what does it cost

On Sun, Apr 5, 2020 at 6:36 PM, Adam J
<neon_lights2007@...> wrote:

My 536 is like that too although i just park on my fav channel and or the 536 will do id scan on nxdn and dmr which is nice with out it scanning my other banks. I have yet to try changing the "scanned banks" by pushing the numbers to select different banks for scanning but after reading some of Jims posts it appears very simple and easy.

Adam

Sent from Outlook Mobile

From: main@Uniden.groups.io <main@Uniden.groups.io> on behalf of John Svensson via groups.io <jsven2@...>
Sent: Sunday, April 5, 2020 4:37:12 PM
To: main@Uniden.groups.io <main@Uniden.groups.io>
Subject: Re: [Uniden] BCD996T

I never charge the batteries while they are in the scanner, one should always charge them in an external charger

John

From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Stevesweb
Sent: Sunday, April 5, 2020 04:52
To: main@Uniden.groups.io
Subject: Re: [Uniden] BCD996T

Just messing with you. Ive been working in computers and electronics since in my early teens ('70s). Dang I'm getting old.

I just remember using a 2.0A charger when I first bought my 436 and the battery compartment was very hot after a few hours (Why I looked at groups about heating issues). I started using 1.0A charger and it wouldn't get as hot. Just a personal observation. I recharge on a external charger now.

I was never able to find any amperage ratings for the 436, just voltage 5V ±5%.

Thanks for the info, have a good week. Be Safe!

John Lewis

#520

Wh0at does it cost convenient listing to nexegde I have no Computer

Show quoted text

On Mon, Apr 6, 2020 at 3:54 AM, David O'Banion via groups.io
<spacemissing@...> wrote:

I doubt it.
There is a Huge dfference between operating a conventional radio using software (as our Uniden scanners do)
and having software that almost IS the radio (SDR).

On Monday, April 6, 2020, 12:20:00 AM PDT, John Lewis via groups.io <jcl40511@...> wrote:

Can bcd436hp be upgraded to Lesson nexedge what does it cost

On Sun, Apr 5, 2020 at 6:36 PM, Adam J
<neon_lights2007@...> wrote:

My 536 is like that too although i just park on my fav channel and or the 536 will do id scan on nxdn and dmr which is nice with out it scanning my other banks. I have yet to try changing the "scanned banks" by pushing the numbers to select different banks for scanning but after reading some of Jims posts it appears very simple and easy.

Adam

Sent from Outlook Mobile

From: main@Uniden.groups.io <main@Uniden.groups.io> on behalf of John Svensson via groups.io <jsven2@...>
Sent: Sunday, April 5, 2020 4:37:12 PM
To: main@Uniden.groups.io <main@Uniden.groups.io>
Subject: Re: [Uniden] BCD996T

I never charge the batteries while they are in the scanner, one should always charge them in an external charger

John

From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Stevesweb
Sent: Sunday, April 5, 2020 04:52
To: main@Uniden.groups.io
Subject: Re: [Uniden] BCD996T

Just messing with you. Ive been working in computers and electronics since in my early teens ('70s). Dang I'm getting old.

I just remember using a 2.0A charger when I first bought my 436 and the battery compartment was very hot after a few hours (Why I looked at groups about heating issues). I started using 1.0A charger and it wouldn't get as hot. Just a personal observation. I recharge on a external charger now.

I was never able to find any amperage ratings for the 436, just voltage 5V ±5%.

Thanks for the info, have a good week. Be Safe!

John Lewis

#524

Can anybody tell how turn up down the Volume i 436

Show quoted text

On Mon, Apr 6, 2020 at 2:23 PM, John Lewis via groups.io
<jcl40511@...> wrote:

Wh0at does it cost convenient listing to nexegde I have no Computer

On Mon, Apr 6, 2020 at 3:54 AM, David O'Banion via groups.io
<spacemissing@...> wrote:

I doubt it.
There is a Huge dfference between operating a conventional radio using software (as our Uniden scanners do)
and having software that almost IS the radio (SDR).

On Monday, April 6, 2020, 12:20:00 AM PDT, John Lewis via groups.io <jcl40511@...> wrote:

Can bcd436hp be upgraded to Lesson nexedge what does it cost

On Sun, Apr 5, 2020 at 6:36 PM, Adam J
<neon_lights2007@...> wrote:

My 536 is like that too although i just park on my fav channel and or the 536 will do id scan on nxdn and dmr which is nice with out it scanning my other banks. I have yet to try changing the "scanned banks" by pushing the numbers to select different banks for scanning but after reading some of Jims posts it appears very simple and easy.

Adam

Sent from Outlook Mobile

From: main@Uniden.groups.io <main@Uniden.groups.io> on behalf of John Svensson via groups.io <jsven2@...>
Sent: Sunday, April 5, 2020 4:37:12 PM
To: main@Uniden.groups.io <main@Uniden.groups.io>
Subject: Re: [Uniden] BCD996T

I never charge the batteries while they are in the scanner, one should always charge them in an external charger

John

From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Stevesweb
Sent: Sunday, April 5, 2020 04:52
To: main@Uniden.groups.io
Subject: Re: [Uniden] BCD996T

Just messing with you. Ive been working in computers and electronics since in my early teens ('70s). Dang I'm getting old.

I just remember using a 2.0A charger when I first bought my 436 and the battery compartment was very hot after a few hours (Why I looked at groups about heating issues). I started using 1.0A charger and it wouldn't get as hot. Just a personal observation. I recharge on a external charger now.

I was never able to find any amperage ratings for the 436, just voltage 5V ±5%.

Thanks for the info, have a good week. Be Safe!

Joe M.

#525

Press the scroll knob and twist it counter-clockwise.

Joe M.

Show quoted text

On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
Can anybody tell how turn up down the  Volume i 436

John Lewis

#526

I don't know how to turn up and down thanks Joe

John wd4lew

Show quoted text

On Wed, Apr 8, 2020 at 11:50 AM, Joe M.
<mch@...> wrote:

Press the scroll knob and twist it counter-clockwise.

Joe M.

On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
> Can anybody tell how turn up down the Volume i 436

Joe M.

#527

I told you how to turn it down. To turn it up
press the scroll knob and twist it clockwise.

Joe M.

Show quoted text

On 4/8/2020 11:57 AM, John Lewis via groups.io wrote:
I don't know how to turn up and down thanks Joe

John wd4lew

<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>

    On Wed, Apr 8, 2020 at 11:50 AM, Joe M.
    <mch@...> wrote:
    Press the scroll knob and twist it counter-clockwise.

    Joe M.

    On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
     > Can anybody tell how turn up down the  Volume i 436

<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
	Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>

<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

Tim Ferguson

#528

If you watch the bottom of the display, when you press down on the control knob on top, the volume display shows at the bottom.  Turn the control knob to change the volume.

Tim

Show quoted text

On Apr 8, 2020, at 11:10 AM, Joe M. <mch@...> wrote:

﻿I told you how to turn it down. To turn it up
press the scroll knob and twist it clockwise.

Joe M.

On 4/8/2020 11:57 AM, John Lewis via groups.io wrote:
I don't know how to turn up and down thanks Joe

John wd4lew

<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>

   On Wed, Apr 8, 2020 at 11:50 AM, Joe M.
   <mch@...> wrote:
   Press the scroll knob and twist it counter-clockwise.

   Joe M.

   On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
    > Can anybody tell how turn up down the  Volume i 436

<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
   Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>

<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

Mark Lassman

#529

Unless you’ve got Screen Lock on, in which case you do NOT have to press the knob down first. Just turn it.

Show quoted text

On Apr 8, 2020, at 9:04 AM, John Lewis via groups.io <jcl40511@...> wrote:

I don't know how to turn up and down thanks Joe

John wd4lew

On Wed, Apr 8, 2020 at 11:50 AM, Joe M.
<mch@...> wrote:

Press the scroll knob and twist it counter-clockwise.

Joe M.

On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
> Can anybody tell how turn up down the Volume i 436

John Lewis

#530

I finally figured it it took a minute or two thanks for helping me out with this

John wd4lew

Show quoted text

On Wed, Apr 8, 2020 at 12:27 PM, Mark Lassman via groups.io
<kb6kgx@...> wrote:

Unless you’ve got Screen Lock on, in which case you do NOT have to press the knob down first. Just turn it.

On Apr 8, 2020, at 9:04 AM, John Lewis via groups.io <jcl40511@...> wrote:

I don't know how to turn up and down thanks Joe

John wd4lew

On Wed, Apr 8, 2020 at 11:50 AM, Joe M.
<mch@...> wrote:

Press the scroll knob and twist it counter-clockwise.

Joe M.

On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
> Can anybody tell how turn up down the Volume i 436

Edward Heim

#531

press squelch button down.

Then you can turn volume up or down.

Ed Heim

Show quoted text

On Wednesday, April 8, 2020, 11:27:42 AM CDT, Mark Lassman via groups.io <kb6kgx@...> wrote:

Unless you’ve got Screen Lock on, in which case you do NOT have to press the knob down first. Just turn it.

On Apr 8, 2020, at 9:04 AM, John Lewis via groups.io <jcl40511@...> wrote:

I don't know how to turn up and down thanks Joe

John wd4lew

On Wed, Apr 8, 2020 at 11:50 AM, Joe M.
<mch@...> wrote:

Press the scroll knob and twist it counter-clockwise.

Joe M.

On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
> Can anybody tell how turn up down the Volume i 436

John Lewis

#532

How do u set the delay up up 3 to 5 Seconds

John

Show quoted text

On Wed, Apr 8, 2020 at 12:49 PM, Edward Heim via groups.io
<edward_heim@...> wrote:

press squelch button down.
Then you can turn volume up or down.

Ed Heim

On Wednesday, April 8, 2020, 11:27:42 AM CDT, Mark Lassman via groups.io <kb6kgx@...> wrote:

Unless you’ve got Screen Lock on, in which case you do NOT have to press the knob down first. Just turn it.

On Apr 8, 2020, at 9:04 AM, John Lewis via groups.io <jcl40511@...> wrote:

I don't know how to turn up and down thanks Joe

John wd4lew

On Wed, Apr 8, 2020 at 11:50 AM, Joe M.
<mch@...> wrote:

Press the scroll knob and twist it counter-clockwise.

Joe M.

On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
> Can anybody tell how turn up down the Volume i 436

Joe M.

#533

Edit the channel then use SET DELAY TIME to set the delay you want.

Joe M.

Show quoted text

On 4/8/2020 1:04 PM, John Lewis via groups.io wrote:
How do u set the delay up up 3 to 5  Seconds

John

<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>

    On Wed, Apr 8, 2020 at 12:49 PM, Edward Heim via groups.io
    <edward_heim@...> wrote:
    press squelch button down.
    Then you can turn volume up or down.

    Ed Heim

    On Wednesday, April 8, 2020, 11:27:42 AM CDT, Mark Lassman via
    groups.io <kb6kgx@...> wrote:


    Unless you’ve got Screen Lock on, in which case you do NOT have to
    press the knob down first. Just turn it.


    On Apr 8, 2020, at 9:04 AM, John Lewis via groups.io
    <jcl40511@...> wrote:

    ﻿I don't know how to turn up and down thanks Joe

    John wd4lew

    <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>

        On Wed, Apr 8, 2020 at 11:50 AM, Joe M.
        <mch@...> wrote:
        Press the scroll knob and twist it counter-clockwise.

        Joe M.

        On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
        > Can anybody tell how turn up down the  Volume i 436
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
	Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>


<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

azpowells

#534

S I G H .....

Show quoted text

On 4/8/2020 9:09 AM, Joe M. wrote:

I told you how to turn it down. To turn it up
press the scroll knob and twist it clockwise.

Joe M.

On 4/8/2020 11:57 AM, John Lewis via groups.io wrote:

I don't know how to turn up and down thanks Joe

John wd4lew

<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>

    On Wed, Apr 8, 2020 at 11:50 AM, Joe M.
    <mch@...> wrote:
    Press the scroll knob and twist it counter-clockwise.

    Joe M.

    On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
     > Can anybody tell how turn up down the Volume i 436

<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
    Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>

<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

Tim Ferguson

#535

I second that S I G H.......

Tim

Show quoted text

On Apr 8, 2020, at 4:05 PM, azpowells <azpowells@...> wrote:

S I G H .....

On 4/8/2020 9:09 AM, Joe M. wrote:

I told you how to turn it down. To turn it up
press the scroll knob and twist it clockwise.

Joe M.

On 4/8/2020 11:57 AM, John Lewis via groups.io wrote:

I don't know how to turn up and down thanks Joe

John wd4lew

<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>

    On Wed, Apr 8, 2020 at 11:50 AM, Joe M.
    <mch@...> wrote:
    Press the scroll knob and twist it counter-clockwise.

    Joe M.

    On 4/8/2020 9:18 AM, John Lewis via groups.io wrote:
     > Can anybody tell how turn up down the Volume i 436

<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
    Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>

<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

ROGER EATON

#536

Help I have a Homepatrol 2 that has a sd card error what do I need to do?

Roger eaton

Sent from Mail for Windows 10

Virus-free. www.avast.com

Joe M.

#537

Replace the card, CLEAR USER DATA in
Sentinel, then reload your programming.

You can first try to remove and re-seat
the card, but likely it needs replaced.

Joe M.

Show quoted text

On 4/8/2020 8:46 PM, ROGER EATON wrote:
Help I have a Homepatrol 2 that has a sd card error what do I need to do?

Roger eaton

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows 10


<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>
	Virus-free. www.avast.com
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>


<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

ROGER EATON

#538

Thanks clearing the user data worked

Sent from Mail for Windows 10

Show quoted text

From: Joe M.
Sent: Wednesday, April 8, 2020 8:49 PM
To: main@uniden.groups.io
Subject: Re: [Uniden] bcd436hp

Replace the card, CLEAR USER DATA in

Sentinel, then reload your programming.

You can first try to remove and re-seat

the card, but likely it needs replaced.

Joe M.

On 4/8/2020 8:46 PM, ROGER EATON wrote:

> Help I have a Homepatrol 2 that has a sd card error what do I need to do?

>

> Roger eaton

>

> Sent from Mail <https://go.microsoftcom/fwlink/?LinkId=550986> for

> Windows 10

>

> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>

> Virus-free. www.avast.com

> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>

>

> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

>

Joe M.

#539

If this is on the same card, I would get another one as a back-up ASAP.
(note: you can go larger if you record on it - for larger storage)

Joe M.

Show quoted text

On 4/8/2020 9:01 PM, ROGER EATON wrote:
Thanks clearing the user data worked

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows 10

*From: *Joe M. <mailto:mch@...>
*Sent: *Wednesday, April 8, 2020 8:49 PM
*To: *main@uniden.groups.io <mailto:main@uniden.groups.io>
*Subject: *Re: [Uniden] bcd436hp

Replace the card, CLEAR USER DATA in

Sentinel, then reload your programming.

You can first try to remove and re-seat

the card, but likely it needs replaced.

Joe M.

On 4/8/2020 8:46 PM, ROGER EATON wrote:

 > Help I have a Homepatrol 2 that has a sd card error what do I need to do?

 >

 > Roger eaton

 >

 > Sent from Mail <https://go.microsoftcom/fwlink/?LinkId=550986> for

 > Windows 10

 >

 >

 >
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>

 >             Virus-free. www.avast.com

 >
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>

 >

 >

 > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

 >

ROGER EATON

#540

Again Thanks for the help. Do you know anything about Columbus Ohio police

Sent from Mail for Windows 10

Show quoted text

From: Joe M.
Sent: Wednesday, April 8, 2020 9:06 PM
To: main@uniden.groups.io
Subject: Re: [Uniden] bcd436hp

If this is on the same card, I would get another one as a back-up ASAP.

(note: you can go larger if you record on it - for larger storage)

Joe M.

On 4/8/2020 9:01 PM, ROGER EATON wrote:

> Thanks clearing the user data worked

>

> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for

> Windows 10

>

> *From: *Joe M. <mailto:mch@...>

> *Sent: *Wednesday, April 8, 2020 8:49 PM

> *To: *main@uniden.groups.io <mailto:main@uniden.groups.io>

> *Subject: *Re: [Uniden] bcd436hp

>

> Replace the card, CLEAR USER DATA in

>

> Sentinel, then reload your programming.

>

> You can first try to remove and re-seat

>

> the card, but likely it needs replaced.

>

> Joe M.

>

> On 4/8/2020 8:46 PM, ROGER EATON wrote:

>

> > Help I have a Homepatrol 2 that has a sd card error what do I need to do?

>

> >

>

> > Roger eaton

>

> >

>

> > Sent from Mail <https://go.microsoftcom/fwlink/?LinkId=550986> for

>

> > Windows 10

>

> >

>

> >

>

> >

> <https://wwwavast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>

>

> > Virus-free. www.avast.com

>

> >

> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>

>

> >

>

> >

>

> > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

>

> >

>