BCD436 - Send In to Uniden to...


Scott Van Nostrand
 

I’m thinking of selling my 436 after getting a SDS200 for Christmas. I’d like to be sure it’s 100% before putting it up for sale. Example…having the C1 diode checked/added if needed.

 

Anyone have experience with Uniden service department lately?

 

Scott


harvey morse
 

I had to send in my SDS-100 under warranty, and it took two months to receive it back. Status follow up calls did not offer any assistance.

 

Harvey

 

From: <main@Uniden.groups.io> on behalf of "Scott Van Nostrand via groups.io" <scott.vannostrand@...>
Reply-To: "main@Uniden.groups.io" <main@Uniden.groups.io>
Date: Sunday, January 2, 2022 at 9:23 AM
To: "main@Uniden.groups.io" <main@Uniden.groups.io>
Subject: [Uniden] BCD436 - Send In to Uniden to...

 

I’m thinking of selling my 436 after getting a SDS200 for Christmas. I’d like to be sure it’s 100% before putting it up for sale. Example…having the C1 diode checked/added if needed.

 

Anyone have experience with Uniden service department lately?

 

Scott


Joe M.
 

That is sorta meaningless without a timeframe.

A year ago I heard a couple months was the norm.

Last fall, I heard two weeks was the norm.

I have not heard anything from the past few months.

Joe M.

On 1/2/2022 11:07 AM, harvey morse wrote:
I had to send in my SDS-100 under warranty, and it took two months to
receive it back. Status follow up calls did not offer any assistance.

Harvey

*From: *<main@Uniden.groups.io> on behalf of "Scott Van Nostrand via
groups.io" <scott.vannostrand@...>
*Reply-To: *"main@Uniden.groups.io" <main@Uniden.groups.io>
*Date: *Sunday, January 2, 2022 at 9:23 AM
*To: *"main@Uniden.groups.io" <main@Uniden.groups.io>
*Subject: *[Uniden] BCD436 - Send In to Uniden to...

I’m thinking of selling my 436 after getting a SDS200 for Christmas. I’d
like to be sure it’s 100% before putting it up for sale. Example…having
the C1 diode checked/added if needed.

Anyone have experience with Uniden service department lately?

Scott


Craig Scott
 

I sent in a BC-898T that I bought on ebay for 50 bucks.  No back light.  Flat rate repair, fixed backlight, did firmware update.  Had it back in a month.  This was 2 months ago.
Craig
 Watervliet NY 

On Sunday, January 2, 2022, 11:20:29 AM EST, Joe M. <mch@...> wrote:


That is sorta meaningless without a timeframe.

A year ago I heard a couple months was the norm.

Last fall, I heard two weeks was the norm.

I have not heard anything from the past few months.

Joe M.

On 1/2/2022 11:07 AM, harvey morse wrote:
> I had to send in my SDS-100 under warranty, and it took two months to
> receive it back. Status follow up calls did not offer any assistance.
>
> Harvey
>
> *From: *<main@Uniden.groups.io> on behalf of "Scott Van Nostrand via
> groups.io" <scott.vannostrand=spiffyiron.com@groups.io>
> *Reply-To: *"main@Uniden.groups.io" <main@Uniden.groups.io>
> *Date: *Sunday, January 2, 2022 at 9:23 AM
> *To: *"main@Uniden.groups.io" <main@Uniden.groups.io>
> *Subject: *[Uniden] BCD436 - Send In to Uniden to...
>
> I’m thinking of selling my 436 after getting a SDS200 for Christmas. I’d
> like to be sure it’s 100% before putting it up for sale. Example…having
> the C1 diode checked/added if needed.
>
> Anyone have experience with Uniden service department lately?
>
> Scott
>
>






Glenn (Butch) Kanvick
 

What was the flat rate charge?


On Mon, Jan 3, 2022 at 6:26 AM Craig Scott via groups.io <dredmlm=yahoo.com@groups.io> wrote:
I sent in a BC-898T that I bought on ebay for 50 bucks.  No back light.  Flat rate repair, fixed backlight, did firmware update.  Had it back in a month.  This was 2 months ago.
Craig
 Watervliet NY 

On Sunday, January 2, 2022, 11:20:29 AM EST, Joe M. <mch@...> wrote:


That is sorta meaningless without a timeframe.

A year ago I heard a couple months was the norm.

Last fall, I heard two weeks was the norm.

I have not heard anything from the past few months.

Joe M.

On 1/2/2022 11:07 AM, harvey morse wrote:
> I had to send in my SDS-100 under warranty, and it took two months to
> receive it back. Status follow up calls did not offer any assistance.
>
> Harvey
>
> *From: *<main@Uniden.groups.io> on behalf of "Scott Van Nostrand via
> groups.io" <scott.vannostrand=spiffyiron.com@groups.io>
> *Reply-To: *"main@Uniden.groups.io" <main@Uniden.groups.io>
> *Date: *Sunday, January 2, 2022 at 9:23 AM
> *To: *"main@Uniden.groups.io" <main@Uniden.groups.io>
> *Subject: *[Uniden] BCD436 - Send In to Uniden to...
>
> I’m thinking of selling my 436 after getting a SDS200 for Christmas. I’d
> like to be sure it’s 100% before putting it up for sale. Example…having
> the C1 diode checked/added if needed.
>
> Anyone have experience with Uniden service department lately?
>
> Scott
>
>







--
Glenn (Butch) Kanvick
KE7FEL/R
1-406-655-1232
 


Craig Scott
 

$79.00



On Monday, January 3, 2022, 08:54:19 AM EST, Glenn "Butch" Kanvick <hotlrv1@...> wrote:


What was the flat rate charge?

On Mon, Jan 3, 2022 at 6:26 AM Craig Scott via groups.io <dredmlm=yahoo.com@groups.io> wrote:
I sent in a BC-898T that I bought on ebay for 50 bucks.  No back light.  Flat rate repair, fixed backlight, did firmware update.  Had it back in a month.  This was 2 months ago.
Craig
 Watervliet NY 

On Sunday, January 2, 2022, 11:20:29 AM EST, Joe M. <mch@...> wrote:


That is sorta meaningless without a timeframe.

A year ago I heard a couple months was the norm.

Last fall, I heard two weeks was the norm.

I have not heard anything from the past few months.

Joe M.

On 1/2/2022 11:07 AM, harvey morse wrote:
> I had to send in my SDS-100 under warranty, and it took two months to
> receive it back. Status follow up calls did not offer any assistance.
>
> Harvey
>
> *From: *<main@Uniden.groups.io> on behalf of "Scott Van Nostrand via
> groups.io" <scott.vannostrand=spiffyiron.com@groups.io>
> *Reply-To: *"main@Uniden.groups.io" <main@Uniden.groups.io>
> *Date: *Sunday, January 2, 2022 at 9:23 AM
> *To: *"main@Uniden.groups.io" <main@Uniden.groups.io>
> *Subject: *[Uniden] BCD436 - Send In to Uniden to...
>
> I’m thinking of selling my 436 after getting a SDS200 for Christmas. I’d
> like to be sure it’s 100% before putting it up for sale. Example…having
> the C1 diode checked/added if needed.
>
> Anyone have experience with Uniden service department lately?
>
> Scott
>
>







--
Glenn (Butch) Kanvick
KE7FEL/R
1-406-655-1232
 


Scott Van Nostrand
 

A few months is prob ok for me. I have the SDS200 now and just about complete setting it up on ProScan so I’ll have a “mobile” solution.

 

Scott (N2ZYI)

 

From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Craig Scott via groups.io
Sent: Monday, January 3, 2022 8:58 AM
To: main@Uniden.groups.io
Subject: Re: [Uniden] BCD436 - Send In to Uniden to...

 

$79.00

 

 

 

On Monday, January 3, 2022, 08:54:19 AM EST, Glenn "Butch" Kanvick <hotlrv1@...> wrote:

 

 

What was the flat rate charge?

 

On Mon, Jan 3, 2022 at 6:26 AM Craig Scott via groups.io <dredmlm=yahoo.com@groups.io> wrote:

I sent in a BC-898T that I bought on ebay for 50 bucks.  No back light.  Flat rate repair, fixed backlight, did firmware update.  Had it back in a month.  This was 2 months ago.

Craig

 Watervliet NY 

 

On Sunday, January 2, 2022, 11:20:29 AM EST, Joe M. <mch@...> wrote:

 

 

That is sorta meaningless without a timeframe.

A year ago I heard a couple months was the norm.

Last fall, I heard two weeks was the norm.

I have not heard anything from the past few months.

Joe M.

On 1/2/2022 11:07 AM, harvey morse wrote:
> I had to send in my SDS-100 under warranty, and it took two months to
> receive it back. Status follow up calls did not offer any assistance.
>
> Harvey
>
> *From: *<main@Uniden.groups.io> on behalf of "Scott Van Nostrand via
> groups.io" <scott.vannostrand=spiffyiron.com@groups.io>
> *Reply-To: *"main@Uniden.groups.io" <main@Uniden.groups.io>
> *Date: *Sunday, January 2, 2022 at 9:23 AM
> *To: *"main@Uniden.groups.io" <main@Uniden.groups.io>
> *Subject: *[Uniden] BCD436 - Send In to Uniden to...
>
> I’m thinking of selling my 436 after getting a SDS200 for Christmas. I’d
> like to be sure it’s 100% before putting it up for sale. Example…having
> the C1 diode checked/added if needed.
>
> Anyone have experience with Uniden service department lately?
>
> Scott
>
>





 

--

Glenn (Butch) Kanvick

KE7FEL/R

1-406-655-1232