|
Next question: Are you sure it is not trunked?
Joe M.
toggle quoted message
Show quoted text
On 5/7/2021 9:57 PM, Kev Myles via groups.io wrote: I programmed the System as a Conventional and set the Audio as Digital in the settings. Coming in loud and clear on the Uniden as well as the TRX1.
On May 7, 2021, at 4:52 PM, Joe M. <mch@...> wrote:
Is the channel set for analog only?
Joe M.
On 4/29/2021 7:16 PM, Kev Myles via groups.io wrote:
No it’s not encrypted. My TRX1 is decoding the frequencies perfect, but
my 996P2 scanner is quiet on the same frequencies 854 to 856 range. In
the settings it is telling me that DMR and Provoice have been activated,
but I am not hearing any voice traffic unlike the TRX1. I bought the
996P2 used with the DMR and Provoice already activated. Any idea what
could be the problem with my Uniden 996P2? Any help/Advice much
appreciated.
|
|
|
Kev Myles
I programmed the System as a Conventional and set the Audio as Digital in the settings. Coming in loud and clear on the Uniden as well as the TRX1.
toggle quoted message
Show quoted text
On May 7, 2021, at 4:52 PM, Joe M. <mch@...> wrote:
Is the channel set for analog only?
Joe M.
On 4/29/2021 7:16 PM, Kev Myles via groups.io wrote:
No it’s not encrypted. My TRX1 is decoding the frequencies perfect, but
my 996P2 scanner is quiet on the same frequencies 854 to 856 range. In
the settings it is telling me that DMR and Provoice have been activated,
but I am not hearing any voice traffic unlike the TRX1. I bought the
996P2 used with the DMR and Provoice already activated. Any idea what
could be the problem with my Uniden 996P2? Any help/Advice much
appreciated.
|
|
|
Is the channel set for analog only?
Joe M.
toggle quoted message
Show quoted text
On 4/29/2021 7:16 PM, Kev Myles via groups.io wrote: No it’s not encrypted. My TRX1 is decoding the frequencies perfect, but
my 996P2 scanner is quiet on the same frequencies 854 to 856 range. In
the settings it is telling me that DMR and Provoice have been activated,
but I am not hearing any voice traffic unlike the TRX1. I bought the
996P2 used with the DMR and Provoice already activated. Any idea what
could be the problem with my Uniden 996P2? Any help/Advice much
appreciated.
|
|
|
Kev Myles
No it’s not encrypted. My TRX1 is decoding the frequencies perfect, but my 996P2 scanner is quiet on the same frequencies 854 to 856 range. In the settings it is telling me that DMR and Provoice have been activated, but I am not hearing any voice traffic unlike the TRX1. I bought the 996P2 used with the DMR and Provoice already activated. Any idea what could be the problem with my Uniden 996P2? Any help/Advice much appreciated.
|
|
|
Glenn (Butch) Kanvick
On some systems the Control Channel changes frequencies, sometimes everyday, sometimes at midnight.
I was hearing voices on 854.8125 yesterday and the day before, but today silence and after a little while a steady buzzing noise. Control channel? Didn’t pick up any other 800 MHz frequencies for the short time I was at that particular location.
> On Apr 16, 2021, at 12:12 PM, Evan Platt <evan@...> wrote:
>
> On which? DMR? You shouldn't hear anything on encrypted or a DMR
> control channel - unless you don't have the DMR activated.
>
>
>> On Thu, Apr 15, 2021 at 1:53 PM Tommy Long <tjl1960@...> wrote:
>>
>> on my scanner it make a bunch of noise .
>>
>> ------ Original Message ------
>> From: "Evan Platt" <evan@...>
>> To: main@uniden.groups.io
>> Sent: 4/15/2021 2:27:46 PM
>> Subject: Re: [Uniden] No sound on search results.
>>
>>> I believe encrypted traffic would be silent / no sound. Control
>>> channel I can't recall what you'd hear, if anything.
>>>
>>> On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io
>>> <wkevinm=yahoo.ca@groups.io> wrote:
>>>>
>>>> Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
>>>>> On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@...> wrote:
>>>>>
>>>>> Potentially it's either a control channel, or encrypted.
>>>>>
>>>>> On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
>>>>> <wkevinm=yahoo.ca@groups.io> wrote:
>>>>>>
>>>>>> Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
-- Glenn (Butch) Kanvick KE7FEL/R 1-406-655-1232
|
|
|
Kev Myles
I was hearing voices on 854.8125 yesterday and the day before, but today silence and after a little while a steady buzzing noise. Control channel? Didn’t pick up any other 800 MHz frequencies for the short time I was at that particular location.
toggle quoted message
Show quoted text
On Apr 16, 2021, at 12:12 PM, Evan Platt <evan@...> wrote:
On which? DMR? You shouldn't hear anything on encrypted or a DMR
control channel - unless you don't have the DMR activated.
On Thu, Apr 15, 2021 at 1:53 PM Tommy Long <tjl1960@...> wrote:
on my scanner it make a bunch of noise .
------ Original Message ------
From: "Evan Platt" <evan@...>
To: main@uniden.groups.io
Sent: 4/15/2021 2:27:46 PM
Subject: Re: [Uniden] No sound on search results.
I believe encrypted traffic would be silent / no sound. Control
channel I can't recall what you'd hear, if anything.
On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io
<wkevinm@...> wrote:
Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@...> wrote:
Potentially it's either a control channel, or encrypted.
On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
<wkevinm@...> wrote:
Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.
|
|
|
On which? DMR? You shouldn't hear anything on encrypted or a DMR
control channel - unless you don't have the DMR activated.
toggle quoted message
Show quoted text
On Thu, Apr 15, 2021 at 1:53 PM Tommy Long <tjl1960@...> wrote:
on my scanner it make a bunch of noise .
------ Original Message ------
From: "Evan Platt" <evan@...>
To: main@uniden.groups.io
Sent: 4/15/2021 2:27:46 PM
Subject: Re: [Uniden] No sound on search results.
I believe encrypted traffic would be silent / no sound. Control
channel I can't recall what you'd hear, if anything.
On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io
<wkevinm@...> wrote:
Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
> On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@...> wrote:
>
> Potentially it's either a control channel, or encrypted.
>
> On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
> <wkevinm@...> wrote:
>>
>> Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.
>>
>
>
>
>
>
|
|
|
Kev Myles
I made a few adjustments and it seems to be working a lot better now. Unchecked the boxes in Limit search from P25, NXDN, etc., set the Adc and Dac to default values. I set the dsp to default 64.
toggle quoted message
Show quoted text
On Apr 15, 2021, at 5:39 PM, Tommy Long <tjl1960@...> wrote:
on my scanner it make a bunch of noise .
------ Original Message ------
From: "Evan Platt" <evan@...>
To: main@uniden.groups.io
Sent: 4/15/2021 2:27:46 PM
Subject: Re: [Uniden] No sound on search results.
I believe encrypted traffic would be silent / no sound. Control
channel I can't recall what you'd hear, if anything.
On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io
<wkevinm@...> wrote:
Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@...> wrote:
Potentially it's either a control channel, or encrypted.
On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
<wkevinm@...> wrote:
Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.
|
|
|
on my scanner it make a bunch of noise .
toggle quoted message
Show quoted text
------ Original Message ------ From: "Evan Platt" <evan@...> To: main@uniden.groups.io Sent: 4/15/2021 2:27:46 PM Subject: Re: [Uniden] No sound on search results. I believe encrypted traffic would be silent / no sound. Control
channel I can't recall what you'd hear, if anything.
On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io
<wkevinm@...> wrote:
Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
> On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@...> wrote:
>
> Potentially it's either a control channel, or encrypted.
>
> On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
> <wkevinm@...> wrote:
>>
>> Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.
>>
>
>
>
>
>
|
|
|
On control channels you hear nothing. You see the color
code, and usually the slot flashes between 1 and 2.
Joe M.
toggle quoted message
Show quoted text
On 4/15/2021 3:27 PM, Evan Platt wrote: I believe encrypted traffic would be silent / no sound. Control
channel I can't recall what you'd hear, if anything.
On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io
<wkevinm@...> wrote:
Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@...> wrote:
Potentially it's either a control channel, or encrypted.
On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
<wkevinm@...> wrote:
Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.
|
|
|
Kev Myles
Ok, I see. I though there would be a tone, or noise of some sort. I noticed in the TRX1 manual on page 61 that the ADC and DAC default settings are+0dB and DSP Level Adapt is 64 so I just reset it to those values.
toggle quoted message
Show quoted text
On Apr 15, 2021, at 4:57 PM, Evan Platt <evan@...> wrote:
I believe encrypted traffic would be silent / no sound. Control
channel I can't recall what you'd hear, if anything.
On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io
<wkevinm@...> wrote:
Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@...> wrote:
Potentially it's either a control channel, or encrypted.
On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
<wkevinm@...> wrote:
Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.
|
|
|
I believe encrypted traffic would be silent / no sound. Control channel I can't recall what you'd hear, if anything. On Thu, Apr 15, 2021 at 4:33 AM Kev Myles via groups.io <wkevinm@...> wrote:
Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@...> wrote:
Potentially it's either a control channel, or encrypted.
On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
<wkevinm@...> wrote:
Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.
|
|
|
Kev Myles
Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for mobile” it said.
toggle quoted message
Show quoted text
On Apr 15, 2021, at 12:54 AM, Evan Platt <evan@...> wrote:
Potentially it's either a control channel, or encrypted.
On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io
<wkevinm@...> wrote:
Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.
|
|
|
Potentially it's either a control channel, or encrypted. On Wed, Apr 14, 2021 at 2:46 PM Kev Myles via groups.io <wkevinm@...> wrote:
Did a search on my 996P2 today and found DMR frequencies 854.8125 and 855.5625 which I heard talking on, but mostly stopped on 856.225 where there was no sound at all, but could see Slot numbers and Color numbers underneath the frequency. Example; Slot: 1 Color: 7, or Slot: 2 Color: 4. No Sound, or talking. Are there any settings I need to change? Thanks in advance.
|
|
|
