Date
1 - 11 of 11
Audio in on Laptop BCD436HP>Proscan
|
narcissists_suck
Has anyone successfully gotten audio in to work on a dell Laptop that only has a combo headphone/microphone jack?
|
|
|
|
I use an Audio to USB adapter.
From: main@Uniden.groups.io On Behalf Of narcissists_suck
Sent: Saturday, June 27, 2020 13:25 To: main@Uniden.groups.io Subject: [Uniden] Audio in on Laptop BCD436HP>Proscan
Has anyone successfully gotten audio in to work on a dell Laptop that only has a combo headphone/microphone jack?
|
|
|
|
Evan Platt
Are you trying to basically listen to the audio from the scanner? WHen
toggle quoted messageShow quoted text
you plug the scanner in (using a 3.5mm audio patch cable), the laptop should prompt you, headset or microphone. Say Microphone. Then in Windows Audio properties, you'll need to select "Listen to this device."
On Sat, Jun 27, 2020 at 11:07 AM narcissists_suck <ggpggp@pacbell.net> wrote:
|
|
|
|
narcissists_suck
Trying to use the record function in Proscan.
This is a Dell Laptop. That option is supposed to appear, but I have been unable to implement that. So this is a Dell Laptop specific question.
|
|
|
|
Joe M.
Did you plug it in and select that it's a mic input?
toggle quoted messageShow quoted text
(assuming there might only be one audio port) Joe M.
On 6/28/2020 11:24 AM, narcissists_suck wrote:
Trying to use the record function in Proscan.
|
|
|
|
Roy Schahrer
You will likely need a cable like this to get autio into that laptop.
On June 27, 2020 at 10:25 AM narcissists_suck <ggpggp@...> wrote:
|
|
|
|
narcissists_suck
Thanks. I have a lot of adapters, but not one like that. I;ll give it a try.
|
|
|
|
Joe M.
On the Dells I've had to set, they just use the standard stereo 3.5mm audio cable. When you plug it in a popup comes up and asks how it is to be used. Select LINE IN.
toggle quoted messageShow quoted text
Joe M.
On 6/28/2020 2:35 PM, Roy Schahrer wrote:
You will likely need a cable like this to get autio into that laptop.
|
|
|
|
This is what I recommend using:
https://www.amazon.com/Behringer-U-Control-UCA222-Ultra-Low-Interface/dp/B0023BYDHK
From: main@Uniden.groups.io On Behalf Of narcissists_suck
Sent: Sunday, June 28, 2020 14:45 To: main@Uniden.groups.io Subject: Re: [Uniden] Audio in on Laptop BCD436HP>Proscan
Thanks. I have a lot of adapters, but not one like that. I;ll give it a try
|
|
|
|
narcissists_suck
Thanks. I don't get that pop up. Furthermore, under "Stereo Mix Properties" the Jack Information option is a blank with the exception of a single black dot.
|
|
|
|
narcissists_suck
Solved
I wasn't getting that pop up. Furthermore, under "Stereo Mix Properties" the Jack Information option was a blank with the exception of a single black dot. I found an older version of the driver and installed it. I now get the pop up that permits me top identify the use of the jack. A standard stereo cable with 3.5 mm male connectors at each end is used for the connection. The popup recognizes the connection and I selected mic in. the Version of the driver I am using on my Dell 15 7958 2-in-1 is
|
|
|