Les Crack the top case off, check the solder joint of the centre of the small piece of coax between the pcb and rear case mounted bnc socket. I have over the years found 3 whereby it was not soldered

Les Crack the top case off, check the solder joint of the centre of the small piece of coax between the pcb and rear case mounted bnc socket. I have over the years found 3 whereby it was not soldered

Said this 3 times now….but we get no result. mike

Put the aerial feed direct to the scanner

This mulicoupler, is it buffered by each having an built in attenuator? If not it could be an input impeadance/loading issue. Try the discone direct to the radio first, then comeback. Mike

Yep. Earphones are typically 1000ohms, most non piezo speakers like HSN4031A are 8ohms Wont get any volume out of an earphone socket if you stick it in there. Basic ohms law applies.... Mike de GM7BNF

Its not amplified wont run off of an earphone socket no.

Stick up the biggest ham 2m/70cm dualband 5/8 on 5/8 co-linear vertical you can. Always far out performs even the diamond Mike de GM7BNF

Too flippin right Look on youtube Poor dirt farmer and the eric brandt show Your r ights have gone. Feel sorry for you lot there … and with with guns too. In the uk when we went tetra and lost all com