|
BCD536HP No audio on P25 Trunk Phase 1 System none simulcast system
Does the scanner properly receive any other programmed P25 trunking systems, simulcast sites or otherwise? Did you park the scanner on one of the frequencies in the system (not a control channel) to s
Does the scanner properly receive any other programmed P25 trunking systems, simulcast sites or otherwise? Did you park the scanner on one of the frequencies in the system (not a control channel) to s
|
By
Leslie Polt
· #1517
·
|
|
BCT15X Sensitivity
This venerable analog-only model is still being offered new, and I recently purchased NIB from reputable electronics retailer. Primarily for civil/mil airbands. My attic discone feeds the 15X and 3 IC
This venerable analog-only model is still being offered new, and I recently purchased NIB from reputable electronics retailer. Primarily for civil/mil airbands. My attic discone feeds the 15X and 3 IC
|
By
Leslie Polt
· #1518
·
|
|
BCT15X Sensitivity
Sorry for confusion - the Uniden misses what the ICOMs hear. Les
Sorry for confusion - the Uniden misses what the ICOMs hear. Les
|
By
Leslie Polt
· #1519
·
|
|
BCT15X Sensitivity
It is a new Stridsberg active multicoupler that is described as providing the same unattenuated signal to each of 8 BNC outputs, so i doubt that changing ports will have an effect. But, no harm in try
It is a new Stridsberg active multicoupler that is described as providing the same unattenuated signal to each of 8 BNC outputs, so i doubt that changing ports will have an effect. But, no harm in try
|
By
Leslie Polt
· #1521
·
|
|
BCT15X Sensitivity
No difference trying other output ports on the multicoupler. Unlike a signal splitter, an active multicoupler provides uniform amplification and isolation of all output ports to neutralize signal loss
No difference trying other output ports on the multicoupler. Unlike a signal splitter, an active multicoupler provides uniform amplification and isolation of all output ports to neutralize signal loss
|
By
Leslie Polt
· #1544
·
|
|
BCT15X Sensitivity
Interim Report: I tried different multicoupler ports and even the discone feeding 15X directly; as expected, the same results. A signal must be at least S7 on the ICOMs in order to break minimum squel
Interim Report: I tried different multicoupler ports and even the discone feeding 15X directly; as expected, the same results. A signal must be at least S7 on the ICOMs in order to break minimum squel
|
By
Leslie Polt
· #1548
·
|
|
BCT15X Sensitivity
A good point; didn't consider it, since I don't have airbands programmed into the 536 (using it for local P25 Phase 1 public service). Will program in a conventional airband system and conduct an A-B
A good point; didn't consider it, since I don't have airbands programmed into the 536 (using it for local P25 Phase 1 public service). Will program in a conventional airband system and conduct an A-B
|
By
Leslie Polt
· #1550
·
|
|
BCT15X Sensitivity
I conducted an A-B test with the BCD536, which won (although even that scanner does not pick up the BWI ATC the ICOMs receive). Interestingly, both Unidens had the same limited reception until I disco
I conducted an A-B test with the BCD536, which won (although even that scanner does not pick up the BWI ATC the ICOMs receive). Interestingly, both Unidens had the same limited reception until I disco
|
By
Leslie Polt
· #1552
·
|
|
BCT15X Sensitivity
I reprogrammed using ProScan, no attenuation either global or by system. I am avoiding anything that would invalidate the warranty. I propose to return it to the vendor for credit or exchange. Les, K3
I reprogrammed using ProScan, no attenuation either global or by system. I am avoiding anything that would invalidate the warranty. I propose to return it to the vendor for credit or exchange. Les, K3
|
By
Leslie Polt
· #1559
·
|
|
BCT15X Sensitivity
The local NOAA signal is too strong for testing purposes, but I receive the Eastern Shore (162.5), about 30 miles away, 5-9 on the other radios. The 15X does not hear it at all. I won't open the radio
The local NOAA signal is too strong for testing purposes, but I receive the Eastern Shore (162.5), about 30 miles away, 5-9 on the other radios. The 15X does not hear it at all. I won't open the radio
|
By
Leslie Polt
· #1561
·
|
|
BCT15X Sensitivity
HRO would not replace (15 day return policy), so I shipped it to Uniden under mfr. warranty. As a 50+ year commercial law attorney I might have questioned HRO's return policy, but it wasn't worth maki
HRO would not replace (15 day return policy), so I shipped it to Uniden under mfr. warranty. As a 50+ year commercial law attorney I might have questioned HRO's return policy, but it wasn't worth maki
|
By
Leslie Polt
· #1563
·
|
|
BCT15X Sensitivity
it's perfectly lawful, but involves the technicalities of the Uniform Commercial Code, which is outside the scope of this Group. The radio will be in Uniden's capable hands, so everything's fine. L
it's perfectly lawful, but involves the technicalities of the Uniform Commercial Code, which is outside the scope of this Group. The radio will be in Uniden's capable hands, so everything's fine. L
|
By
Leslie Polt
· #1565
·
|