Date   

Re: Uniden Sentinel missing some CA Trunked systems?

Gigu chan
 

All,

I’m curious  You said  there was an outcry  from Various sources…  I’m curious..  who could raise such a stink  to cause a LE Organization  to back pedal?

I know a bunch of Scanner enthusiasts don’t have that kind of clout…  or maybe they do?

Cheers

Gig

N2GIG

 

Cheers

 

From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Rick NK7I
Sent: Sunday, October 4, 2020 16:25
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden Sentinel missing some CA Trunked systems?

 

If memory serves (sometimes it does), OC went encrypted last year.   There was much hue and cry from various sources and OC relented to not use encryption.  However I've not seen any mention of the network being heard since then; some issues between vendor and buyer, it became political, slowing the entire process.

If it is still encrypted, you won't hear anything.  By now, the database should have picked up (and corrected) any change of frequencies.

Regards,
Rick NK7I (N ID)

On 10/4/2020 10:59 AM, Joe M. wrote:

Rebanding is simple:

1. Program the system frequencies 15 MHz lower.
(866-869 goes to 851-854)

2. If it's a non-P25 system, add the rebanding tables.

That is all you need to do.

Are you sure they did not do more than rebanding?
Such as change to a new system?

Joe M.

On 10/4/2020 1:50 PM, richard@... wrote:

Once Orange County (Ca) went through the Re-Banding my scanners stopped receiving the Trunked System.  I have gone as far as sending one of my scanners in to Uniden.  They confirmed that everything was ok an d I have the correct database.  I worked in Public Safety in OC during the planning for Re-Banding. The contractors asked all of the users if we had scanners that would need to be upgraded.  We included the cost of replacing our scanners just in case. I was retired just as the started to replace radios so this wasn't an issue I got involved in. Has anyone found a fix for this issue on the Uniden BCD436HP?

Thanks in advance for any assistance you can give.







Re: Uniden Sentinel missing some CA Trunked systems?

richard@...
 

An Area Code in the LA Area.

-----Original Message-----
From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Joe M.
Sent: Sunday, October 4, 2020 1:21 PM
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden Sentinel missing some CA Trunked systems?

Not sure what an 818# means. If you mean a frequency of 818 MHz, that is an input frequency and is not used on scanners. Use the output of 863.

Joe M.

On 10/4/2020 2:23 PM, richard@... wrote:
Did I see you have an 818 #? I ask because I don't want to repeat what you already know. We were in the area that had to switch some frequencies with Nextel. At that same time the Countywide System was nearing 10 years old. Each organization in the County that is a stake holder had to put in their share of the infrastructure cost. Nextel paid its share of the total cost. The stakeholders opted to update the entire system including handhelds, base stations and our share of the system front end including, antennas, microwaves. I retired near the end of planning.

-----Original Message-----
From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Joe M.
Sent: Sunday, October 4, 2020 10:59 AM
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden Sentinel missing some CA Trunked systems?

Rebanding is simple:

1. Program the system frequencies 15 MHz lower.
(866-869 goes to 851-854)

2. If it's a non-P25 system, add the rebanding tables.

That is all you need to do.

Are you sure they did not do more than rebanding?
Such as change to a new system?

Joe M.

On 10/4/2020 1:50 PM, richard@... wrote:
Once Orange County (Ca) went through the Re-Banding my scanners stopped receiving the Trunked System. I have gone as far as sending one of my scanners in to Uniden. They confirmed that everything was ok an d I have the correct database. I worked in Public Safety in OC during the planning for Re-Banding. The contractors asked all of the users if we had scanners that would need to be upgraded. We included the cost of replacing our scanners just in case. I was retired just as the started to replace radios so this wasn't an issue I got involved in. Has anyone found a fix for this issue on the Uniden BCD436HP?

Thanks in advance for any assistance you can give.












Re: Uniden Sentinel missing some CA Trunked systems?

richard@...
 

The are channels that allow talk between units of different Cities and then Countywide Channels.

 

From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Joel Kahn
Sent: Sunday, October 4, 2020 12:59 PM
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden Sentinel missing some CA Trunked systems?

 

Richard:

 

Looking at the Radioreference data for Orange County

 

It appears that almost all talk groups- Law Enforcement and Fire are encrypted which means that no scanner can legally hear these communications.

 

The exception looks like Anaheim and most area's public works have some unencrypted T/G.

 

Joel

 

Comme dicté à mon chat et envoyé de mon ordinateur de bureau.
(As dictated to my cat and sent from my desktop computer.)

 

 

 

On Sunday, October 4, 2020, 01:56:23 PM EDT, richard@... <richard@...> wrote:

 

 

Once Orange County (Ca) went through the Re-Banding my scanners stopped receiving the Trunked System.  I have gone as far as sending one of my scanners in to Uniden.  They confirmed that everything was ok an d I have the correct database.  I worked in Public Safety in OC during the planning for Re-Banding. The contractors asked all of the users if we had scanners that would need to be upgraded.  We included the cost of replacing our scanners just in case. I was retired just as the started to replace radios so this wasn't an issue I got involved in. Has anyone found a fix for this issue on the Uniden BCD436HP?

Thanks in advance for any assistance you can give.

> Yes, P25 is listed. I missed that before. I didn't remember that Type
> II supported that, as Type II systems are becoming obscure.

SmartZone can be analog only, digital only, or mixed mode.
        Sy
--
73
-------------------------------------TI zunifrn
Jim Walls - K6CCC
jim@...
Ofc:  818-548-4804
http://members.dslextreme.com/users/k6ccc/
AMSAT Member 32537 - WSWSS Member 395











Re: Uniden Sentinel missing some CA Trunked systems?

richard@...
 

All the radios are the same.  An encryption key is loaded into the program information loaded into the program mask.  So since I had a radio issued to me county communications could load all the channels that I was authorized to use.  If the radio had a problem they would take a radio off the shelf load my radios template and I was done.  One side note If I needed to talk to a unit from another City or Organization, notice the colors and how they are used.  The Chief of Police or head of an organization has to sign off on anyone having access to his system.

 

From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Joel Kahn
Sent: Sunday, October 4, 2020 12:59 PM
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden Sentinel missing some CA Trunked systems?

 

Richard:

 

Looking at the Radioreference data for Orange County

 

It appears that almost all talk groups- Law Enforcement and Fire are encrypted which means that no scanner can legally hear these communications.

 

The exception looks like Anaheim and most area's public works have some unencrypted T/G.

 

Joel

 

Comme dicté à mon chat et envoyé de mon ordinateur de bureau.
(As dictated to my cat and sent from my desktop computer.)

 

 

 

On Sunday, October 4, 2020, 01:56:23 PM EDT, richard@... <richard@...> wrote:

 

 

Once Orange County (Ca) went through the Re-Banding my scanners stopped receiving the Trunked System.  I have gone as far as sending one of my scanners in to Uniden.  They confirmed that everything was ok an d I have the correct database.  I worked in Public Safety in OC during the planning for Re-Banding. The contractors asked all of the users if we had scanners that would need to be upgraded.  We included the cost of replacing our scanners just in case. I was retired just as the started to replace radios so this wasn't an issue I got involved in. Has anyone found a fix for this issue on the Uniden BCD436HP?

Thanks in advance for any assistance you can give.

> Yes, P25 is listed. I missed that before. I didn't remember that Type
> II supported that, as Type II systems are becoming obscure.

SmartZone can be analog only, digital only, or mixed mode.
        Sy
--
73
-------------------------------------TI zunifrn
Jim Walls - K6CCC
jim@...
Ofc:  818-548-4804
http://members.dslextreme.com/users/k6ccc/
AMSAT Member 32537 - WSWSS Member 395











Re: Uniden Sentinel missing some CA Trunked systems?

richard@...
 

Thanks,

 

From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Joel Kahn
Sent: Sunday, October 4, 2020 1:10 PM
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden Sentinel missing some CA Trunked systems?

 

FYI Richard

 

The entire country had to reband to trade cellular frequencies for Public Service frequencies.  I thought that the deadline for this was years ago?

 

If your 436 was OK'd by Uniden, it means you already have the firmware upgrade that was released to handle the rebanding (or they did it while they had the radio).

 

I don't think your problem is rebanding, I think it is encryption of talk groups.

 

Your system has multiple transmitters so you need to have (at least) the control frequencies for towers close to you programmed.  If you do, the radio should periodically stop momentarily (maybe make a garbled noise) and resume scanning when someone transmits on an encrypted talk group.

 

Joel

 

Comme dicté à mon chat et envoyé de mon ordinateur de bureau.
(As dictated to my cat and sent from my desktop computer.)

 

 

 

 


Re: Uniden Sentinel missing some CA Trunked systems?

richard@...
 

I was at Irvine PD in Technology.

-----Original Message-----
From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Jim Walls
Sent: Sunday, October 4, 2020 1:42 PM
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden Sentinel missing some CA Trunked systems?

On 10/04/2020 11:23, richard@... wrote:
Did I see you have an 818 #? I ask because I don't want to repeat what you already know.
I assume the reference to 818 # is my phone number listed in my signature. Yes, my office number is in the 818 area code. I work in the Radio Shop for the city of Glendale, and am the #2 guy running the I-C-I System in Los Angeles county.

--
73
-------------------------------------
Jim Walls - K6CCC
jim@...
Ofc: 818-548-4804
http://members.dslextreme.com/users/k6ccc/
AMSAT Member 32537 - WSWSS Member 395


Re: Uniden Sentinel missing some CA Trunked systems?

richard@...
 

Thx

-----Original Message-----
From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Jim Walls
Sent: Sunday, October 4, 2020 1:36 PM
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden Sentinel missing some CA Trunked systems?

On 10/04/2020 13:10, Joel Kahn wrote:
The entire country had to reband to trade cellular frequencies for
Public Service frequencies. I thought that the deadline for this was
years ago?
It was for most of the country. Orange county California is within the range of the Mexican border that re-banding required treaty negotiations with Mexico. That took years, so most of the 800 MHz systems in that border area have fairly recently completed their re-banding.

--
73
-------------------------------------
Jim Walls - K6CCC
jim@...
Ofc: 818-548-4804
http://members.dslextreme.com/users/k6ccc/
AMSAT Member 32537 - WSWSS Member 395


Re: Uniden Sentinel missing some CA Trunked systems?

Jim Walls
 

On 10/04/2020 11:23, richard@... wrote:
Did I see you have an 818 #? I ask because I don't want to repeat what you already know.
I assume the reference to 818 # is my phone number listed in my signature.  Yes, my office number is in the 818 area code.  I work in the Radio Shop for the city of Glendale, and am the #2 guy running the I-C-I System in Los Angeles county.

--
73
-------------------------------------
Jim Walls - K6CCC
jim@...
Ofc: 818-548-4804
http://members.dslextreme.com/users/k6ccc/
AMSAT Member 32537 - WSWSS Member 395


Re: Uniden Sentinel missing some CA Trunked systems?

Jim Walls
 

On 10/04/2020 13:24, Rick NK7I wrote:
If memory serves (sometimes it does), OC went encrypted last year.   There was much hue and cry from various sources and OC relented to not use encryption.  However I've not seen any mention of the network being heard since then; some issues between vendor and buyer, it became political, slowing the entire process.

Law enforcement on the Orange County system has been encrypted for decades.  When they went P-25, fire got switched to encrypted.  That was not desired even by the fire chiefs, but it took a while to switch back.  I do not know what the status of moving fire back to clear is (I don't normally monitor anything in Orange county).

-- 
73
-------------------------------------
Jim Walls - K6CCC
jim@...
Ofc:  818-548-4804
http://members.dslextreme.com/users/k6ccc/
AMSAT Member 32537 - WSWSS Member 395


Re: Uniden Sentinel missing some CA Trunked systems?

Jim Walls
 

On 10/04/2020 13:10, Joel Kahn wrote:
The entire country had to reband to trade cellular frequencies for Public Service frequencies.  I thought that the deadline for this was years ago?
It was for most of the country.  Orange county California is within the range of the Mexican border that re-banding required treaty negotiations with Mexico.  That took years, so most of the 800 MHz systems in that border area have fairly recently completed their re-banding.

--
73
-------------------------------------
Jim Walls - K6CCC
jim@...
Ofc: 818-548-4804
http://members.dslextreme.com/users/k6ccc/
AMSAT Member 32537 - WSWSS Member 395


Re: Uniden Sentinel missing some CA Trunked systems?

Joe M.
 

But is that database correct?

Any encrypted channels you will not receive no matter
if the system is programmed correctly or not.

Joe M.

On 10/4/2020 2:59 PM, richard@... wrote:
I have the current database as does the Uniden site. What I am/was missing is the instructions you sent. I know the database is out there since all the critical channels are encrypted and those frequencies are out on the web too..

Thanks for your help.

-----Original Message-----
From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Jim Walls
Sent: Sunday, October 4, 2020 11:48 AM
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden Sentinel missing some CA Trunked systems?

On 10/04/2020 10:50, richard@... wrote:
Once Orange County (Ca) went through the Re-Banding my scanners stopped receiving the Trunked System. I have gone as far as sending one of my scanners in to Uniden. They confirmed that everything was ok an d I have the correct database. I worked in Public Safety in OC during the planning for Re-Banding. The contractors asked all of the users if we had scanners that would need to be upgraded. We included the cost of replacing our scanners just in case. I was retired just as the started to replace radios so this wasn't an issue I got involved in. Has anyone found a fix for this issue on the Uniden BCD436HP?
If Radio Reference does not have current data, you will need to manually enter the correct data. Next step is getting the correct data. Since you used to work there, maybe you have contacts that can obtain current information for you.
Can't say that I have tried to listen to Orange County since they re-banded. Mine likely needs to be touched as well...


--
73
-------------------------------------
Jim Walls - K6CCC
jim@...
Ofc: 818-548-4804
http://members.dslextreme.com/users/k6ccc/
AMSAT Member 32537 - WSWSS Member 395












Re: Uniden Sentinel missing some CA Trunked systems?

Rick NK7I
 

If memory serves (sometimes it does), OC went encrypted last year.   There was much hue and cry from various sources and OC relented to not use encryption.  However I've not seen any mention of the network being heard since then; some issues between vendor and buyer, it became political, slowing the entire process.

If it is still encrypted, you won't hear anything.  By now, the database should have picked up (and corrected) any change of frequencies.

Regards,
Rick NK7I (N ID)

On 10/4/2020 10:59 AM, Joe M. wrote:
Rebanding is simple:

1. Program the system frequencies 15 MHz lower.
(866-869 goes to 851-854)

2. If it's a non-P25 system, add the rebanding tables.

That is all you need to do.

Are you sure they did not do more than rebanding?
Such as change to a new system?

Joe M.

On 10/4/2020 1:50 PM, richard@... wrote:
Once Orange County (Ca) went through the Re-Banding my scanners stopped receiving the Trunked System.  I have gone as far as sending one of my scanners in to Uniden.  They confirmed that everything was ok an d I have the correct database.  I worked in Public Safety in OC during the planning for Re-Banding. The contractors asked all of the users if we had scanners that would need to be upgraded.  We included the cost of replacing our scanners just in case. I was retired just as the started to replace radios so this wasn't an issue I got involved in. Has anyone found a fix for this issue on the Uniden BCD436HP?

Thanks in advance for any assistance you can give.







Re: Uniden Sentinel missing some CA Trunked systems?

Joel Kahn
 

FYI Richard

The entire country had to reband to trade cellular frequencies for Public Service frequencies.  I thought that the deadline for this was years ago?

If your 436 was OK'd by Uniden, it means you already have the firmware upgrade that was released to handle the rebanding (or they did it while they had the radio).

I don't think your problem is rebanding, I think it is encryption of talk groups.

Your system has multiple transmitters so you need to have (at least) the control frequencies for towers close to you programmed.  If you do, the radio should periodically stop momentarily (maybe make a garbled noise) and resume scanning when someone transmits on an encrypted talk group.

Joel

Comme dicté à mon chat et envoyé de mon ordinateur de bureau.
(As dictated to my cat and sent from my desktop computer.)





Re: Uniden Sentinel missing some CA Trunked systems?

Joel Kahn
 

Richard:

Looking at the Radioreference data for Orange County

It appears that almost all talk groups- Law Enforcement and Fire are encrypted which means that no scanner can legally hear these communications.

The exception looks like Anaheim and most area's public works have some unencrypted T/G.

Joel

Comme dicté à mon chat et envoyé de mon ordinateur de bureau.
(As dictated to my cat and sent from my desktop computer.)



On Sunday, October 4, 2020, 01:56:23 PM EDT, richard@... <richard@...> wrote:


Once Orange County (Ca) went through the Re-Banding my scanners stopped receiving the Trunked System.  I have gone as far as sending one of my scanners in to Uniden.  They confirmed that everything was ok an d I have the correct database.  I worked in Public Safety in OC during the planning for Re-Banding. The contractors asked all of the users if we had scanners that would need to be upgraded.  We included the cost of replacing our scanners just in case. I was retired just as the started to replace radios so this wasn't an issue I got involved in. Has anyone found a fix for this issue on the Uniden BCD436HP?

Thanks in advance for any assistance you can give.

> Yes, P25 is listed. I missed that before. I didn't remember that Type
> II supported that, as Type II systems are becoming obscure.

SmartZone can be analog only, digital only, or mixed mode.
        Sy
--
73
-------------------------------------TI zunifrn
Jim Walls - K6CCC
jim@...
Ofc:  818-548-4804
http://members.dslextreme.com/users/k6ccc/
AMSAT Member 32537 - WSWSS Member 395












Re: Uniden Sentinel missing some CA Trunked systems?

Joe M.
 

Not sure what an 818# means. If you mean a frequency of 818 MHz, that is an input frequency and is not used on scanners. Use the output of 863.

Joe M.

On 10/4/2020 2:23 PM, richard@... wrote:
Did I see you have an 818 #? I ask because I don't want to repeat what you already know. We were in the area that had to switch some frequencies with Nextel. At that same time the Countywide System was nearing 10 years old. Each organization in the County that is a stake holder had to put in their share of the infrastructure cost. Nextel paid its share of the total cost. The stakeholders opted to update the entire system including handhelds, base stations and our share of the system front end including, antennas, microwaves. I retired near the end of planning.

-----Original Message-----
From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Joe M.
Sent: Sunday, October 4, 2020 10:59 AM
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden Sentinel missing some CA Trunked systems?

Rebanding is simple:

1. Program the system frequencies 15 MHz lower.
(866-869 goes to 851-854)

2. If it's a non-P25 system, add the rebanding tables.

That is all you need to do.

Are you sure they did not do more than rebanding?
Such as change to a new system?

Joe M.

On 10/4/2020 1:50 PM, richard@... wrote:
Once Orange County (Ca) went through the Re-Banding my scanners stopped receiving the Trunked System. I have gone as far as sending one of my scanners in to Uniden. They confirmed that everything was ok an d I have the correct database. I worked in Public Safety in OC during the planning for Re-Banding. The contractors asked all of the users if we had scanners that would need to be upgraded. We included the cost of replacing our scanners just in case. I was retired just as the started to replace radios so this wasn't an issue I got involved in. Has anyone found a fix for this issue on the Uniden BCD436HP?

Thanks in advance for any assistance you can give.











Re: Uniden Sentinel missing some CA Trunked systems?

richard@...
 

I have the current database as does the Uniden site. What I am/was missing is the instructions you sent. I know the database is out there since all the critical channels are encrypted and those frequencies are out on the web too..

Thanks for your help.

-----Original Message-----
From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Jim Walls
Sent: Sunday, October 4, 2020 11:48 AM
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden Sentinel missing some CA Trunked systems?

On 10/04/2020 10:50, richard@... wrote:
Once Orange County (Ca) went through the Re-Banding my scanners stopped receiving the Trunked System. I have gone as far as sending one of my scanners in to Uniden. They confirmed that everything was ok an d I have the correct database. I worked in Public Safety in OC during the planning for Re-Banding. The contractors asked all of the users if we had scanners that would need to be upgraded. We included the cost of replacing our scanners just in case. I was retired just as the started to replace radios so this wasn't an issue I got involved in. Has anyone found a fix for this issue on the Uniden BCD436HP?
If Radio Reference does not have current data, you will need to manually enter the correct data. Next step is getting the correct data. Since you used to work there, maybe you have contacts that can obtain current information for you.
Can't say that I have tried to listen to Orange County since they re-banded. Mine likely needs to be touched as well...


--
73
-------------------------------------
Jim Walls - K6CCC
jim@...
Ofc: 818-548-4804
http://members.dslextreme.com/users/k6ccc/
AMSAT Member 32537 - WSWSS Member 395


Re: Uniden Sentinel missing some CA Trunked systems?

richard@...
 

Did I see you have an 818 #? I ask because I don't want to repeat what you already know. We were in the area that had to switch some frequencies with Nextel. At that same time the Countywide System was nearing 10 years old. Each organization in the County that is a stake holder had to put in their share of the infrastructure cost. Nextel paid its share of the total cost. The stakeholders opted to update the entire system including handhelds, base stations and our share of the system front end including, antennas, microwaves. I retired near the end of planning.

-----Original Message-----
From: main@Uniden.groups.io <main@Uniden.groups.io> On Behalf Of Joe M.
Sent: Sunday, October 4, 2020 10:59 AM
To: main@Uniden.groups.io
Subject: Re: [Uniden] Uniden Sentinel missing some CA Trunked systems?

Rebanding is simple:

1. Program the system frequencies 15 MHz lower.
(866-869 goes to 851-854)

2. If it's a non-P25 system, add the rebanding tables.

That is all you need to do.

Are you sure they did not do more than rebanding?
Such as change to a new system?

Joe M.

On 10/4/2020 1:50 PM, richard@... wrote:
Once Orange County (Ca) went through the Re-Banding my scanners stopped receiving the Trunked System. I have gone as far as sending one of my scanners in to Uniden. They confirmed that everything was ok an d I have the correct database. I worked in Public Safety in OC during the planning for Re-Banding. The contractors asked all of the users if we had scanners that would need to be upgraded. We included the cost of replacing our scanners just in case. I was retired just as the started to replace radios so this wasn't an issue I got involved in. Has anyone found a fix for this issue on the Uniden BCD436HP?

Thanks in advance for any assistance you can give.


Re: Uniden Sentinel missing some CA Trunked systems?

Jim Walls
 

On 10/04/2020 10:50, richard@... wrote:
Once Orange County (Ca) went through the Re-Banding my scanners stopped receiving the Trunked System. I have gone as far as sending one of my scanners in to Uniden. They confirmed that everything was ok an d I have the correct database. I worked in Public Safety in OC during the planning for Re-Banding. The contractors asked all of the users if we had scanners that would need to be upgraded. We included the cost of replacing our scanners just in case. I was retired just as the started to replace radios so this wasn't an issue I got involved in. Has anyone found a fix for this issue on the Uniden BCD436HP?
If Radio Reference does not have current data, you will need to manually enter the correct data.  Next step is getting the correct data.  Since you used to work there, maybe you have contacts that can obtain current information for you.
Can't say that I have tried to listen to Orange County since they re-banded.  Mine likely needs to be touched as well...

--
73
-------------------------------------
Jim Walls - K6CCC
jim@...
Ofc: 818-548-4804
http://members.dslextreme.com/users/k6ccc/
AMSAT Member 32537 - WSWSS Member 395


Re: Uniden Sentinel missing some CA Trunked systems?

Joe M.
 

Rebanding is simple:

1. Program the system frequencies 15 MHz lower.
(866-869 goes to 851-854)

2. If it's a non-P25 system, add the rebanding tables.

That is all you need to do.

Are you sure they did not do more than rebanding?
Such as change to a new system?

Joe M.

On 10/4/2020 1:50 PM, richard@... wrote:
Once Orange County (Ca) went through the Re-Banding my scanners stopped receiving the Trunked System. I have gone as far as sending one of my scanners in to Uniden. They confirmed that everything was ok an d I have the correct database. I worked in Public Safety in OC during the planning for Re-Banding. The contractors asked all of the users if we had scanners that would need to be upgraded. We included the cost of replacing our scanners just in case. I was retired just as the started to replace radios so this wasn't an issue I got involved in. Has anyone found a fix for this issue on the Uniden BCD436HP?

Thanks in advance for any assistance you can give.


Re: Uniden Sentinel missing some CA Trunked systems?

richard@...
 

Once Orange County (Ca) went through the Re-Banding my scanners stopped receiving the Trunked System. I have gone as far as sending one of my scanners in to Uniden. They confirmed that everything was ok an d I have the correct database. I worked in Public Safety in OC during the planning for Re-Banding. The contractors asked all of the users if we had scanners that would need to be upgraded. We included the cost of replacing our scanners just in case. I was retired just as the started to replace radios so this wasn't an issue I got involved in. Has anyone found a fix for this issue on the Uniden BCD436HP?

Thanks in advance for any assistance you can give.

Yes, P25 is listed. I missed that before. I didn't remember that Type
II supported that, as Type II systems are becoming obscure.
SmartZone can be analog only, digital only, or mixed mode.
Sy
--
73
-------------------------------------TI zunifrn
Jim Walls - K6CCC
jim@...
Ofc: 818-548-4804
http://members.dslextreme.com/users/k6ccc/
AMSAT Member 32537 - WSWSS Member 395

701 - 720 of 1973