Thanks, Joe. I would suppose it depends on the usage how long a SD card should last before being replaced? Tim

It's also possible you don't have any selected Service Types enabled. Joe M.

It means you probably have Quick Keys assigned and not enabled in the profile. You can just enable them using the keypad or enable them in your profile then write that to the scanner. Joe M.

Can I ask you some thing why when I program my scanner after I am done take the USB cable off it say not to scan

Ok thanks so much

Just use the CLEAR USER DATA in Sentinel first. Then write your profile. Here is a 5-minute video setting up a new card. The new one in the video is 128GB, but the procedure is the same. You can skip

Is the anything in particular that needs to be done in changing the SD card in a 536HP? I think I have one that’s having trouble and am going to change it out, but didn’t know if the new one

It would be nice if the linked article actually covered what the title states. There is a discussion about NiMH batteries and a little specifics on AA size, but nothing else. There is supposed to be

Agreed. Wayne

Sorry. Make that 5.25V, so... The issue would be three times worse: (3 cells) NIZn = 4.8V to 5.25V Uniden = 3.6V to 4.5V My NiMH cells will usually not exceed 4.1V total. I would not use NIZn

The issue would be three times worse: (3 cells) NIZn = 4.8V to 5.75V Uniden = 3.6V to 4.5V My NiMH cells will usually not exceed 4.1V total. I would not use NIZn based on that. And only 1500 mAH

The literature says NIZn batteries output is 1.6v to 1.75v, but only has 1500 Mah. Will this adversely affect the power circuits in a Uniden radio that was designed for >1.5v? and how long will

The cable is available (sometimes) at Uniden.com and/or scannermaster.com. You can find free scanner programming software by researching the BC259D radio at RadioReference Joel R Kahn Comme dicté à

Wondering why they didn't compare NiZn's.. Pricier, but they last longer. You need a NiZn charger too but still. Awesome batteries.

Here is a suggestion,leave the 15 there,add a 436,or something similar,use a ntenna splitter,or pop on a mag mount antenna,I run 4 scanners at home,and sometimes tit,s barely enough,if you spen a lot

I would try https://www.zipscanners.com John

Hi to the group. Was cleaning out my closet and found an old Uniden Bearcat BP 250 scanner I had forgot I even owned. I charged it up and it still works. I does have the P25 card installed. What I am

https://www.universal-radio.com/catalog/scanners/4996spec.html https://www.universal-radio.com/catalog/scanners/0015spec.html Rich via iPad

The BCD996P2 and BCT15X dimensions are identical. (as are the BCT15, BCD996T, BCD996XT and I believe even the BCD536HP) They are all DIN size. Joe M.

I believe the dimensions are the same.