Found a NIB (new-in-box) Motorola Amplified speaker (HSN1006A) for $40 that I just couldn’t turn down, it will do well with the 436 & SDS100 when mobile. I really hate making “permanent”

G&G COMMUNICATION IN NEW YORK DOES REPAIR ON SOME MODELS IF THEY CAN GET PARTS.I HAVE TWO PRO 96s IN GOING TO SEND IN,

You're asking for alignment, but I'm guessing that the antenna connection to the circuit board has broken. Give it a look before you spend $100 to have it resoldered back to the antenna socket. I had

The local system you entered was Dare County Public Safety Project 25 Phase I, yes? Earlier this year, I was visiting Pawleys Island, SC in Georgetown County. Using my 436HP with GPS, I would get

I have 2 Pro-96's still going strong ... and a Pro-94 & Pro-26 (my Pro-34 finally died a while back).... Look at post #25 on this thread, it describes some internal adjustments you can make to improve

All… Lurker here The Pro-96 scanner was a pretty good unit in it day.. Best of luck in getting it repaired. Regarding getting a scanner repaired. I think Keith is probably right-Uniden

https://forums.radioreference.com/threads/sentinel-update-error.394542/

Service types were checked

Eddie, I managed a Radio Shack in the early nineties, so this info may be out of date. RS did have their own repair facilities in various locations around the country. If you don't have a local RS

Someone recently posted they got their Whistler scanners repaired there. Joe M.

Did you check all of the service types you are interested in? You can either do that in Sentinel or on the unit itself.

The Pro-96 is Radio Shack, but I did hear a few years ago that Uniden will repair Radio Shack scanners, but don’t know if that is still the case.

Eddie, out of curiosity I did a bit of Internet searching. I’m assuming that by “PRO-96”, you mean the old Radio Shack PRO-96. Nice scanner in its day. As with anything with chips in it,

I am getting the following error when attempting updates for either my HP1 or BCD536 and I have also tried from different computers with the same result. Suggestions for resolving would be

Get the Uniden BCD325 scanner. only $325 or so.

Go on the Internet and look for a used one. That’s what I would do.

I was in Nags Head, NC last week and tried to listen to their police and fire channels. Radio Reference and Sentinel shows them in VIPER and a local system. I tried both of them and neither would

G&G in New York? Joe M.

The Pro-96 was not made by Uniden; it was made by GRE. Neither Radio Shack nor Whistler, the company that bought what was left of GRE some years ago, will service it. I have a Pro-95 with the

Last time I knew uniden will repair to Factory condition any uniden radio for $100 no matter what is wrong with it OR send you a discount coupon for a new radio Depending on how much work it needs On