Ok, I see. I though there would be a tone, or noise of some sort. I noticed in the TRX1 manual on page 61 that the ADC and DAC default settings are+0dB and DSP Level Adapt is 64 so I just reset it to

I believe encrypted traffic would be silent / no sound. Control channel I can't recall what you'd hear, if anything. <wkevinm@...> wrote:

Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for

Potentially it's either a control channel, or encrypted. <wkevinm@...> wrote:

You can go to new.marksscanners.com/325/325.shtml for complete programming instructions. 73 Tom Sanders KB2NCI Squaw Island Amateur Radio Club www.siarc.us Ontario County, NY ARES/RACES Ham

396XT, but programs the same way https://www.youtube.com/watch?v=-JozI9UVN_k Now if a new system, just do the same but scroll to New System and select Conventional.

I need help programming a conventional fm site into the scanner. I have programmed ps5 sites in with success but I am not sure how to program conventional sites. A step by step explanation would be a

Joe, I don’t have an SDS200, but the specs I quoted are as shown on the Amazon web page for the SDS200. I do have a BCD996P2 and the specs agree with those shown in the Owners Manual. I double

The 200 specs cannot be correct. The 200 is the same width as the 996 series. It is 1.5 times the height. Is is something on the order of: 7 in (W) X 8 in (D) X 3 In (H). I suspect those 996 specs

Per the owners manuals the specifications for both scanners are the same. 7.2 in (W) X 5.9 in (D) X 2.2 In (H). And as Joe said the SDS200 Is physically larger. It’s specs are shown as 12.75 X

The BCD996P2 fits perfectly Bill KG4BKO -- Bill Collins kg4bko@...

FYI Only, the remote head BC-RH96 is not compatible with the new scanner. The RH96 will work with the BCD996P2, but only with a converter, (obviously not endorsed by Uniden). Curt

My BCD996P2 front is 2.25” x 7.25”

Thanks, Joe. That's what I was looking for. Michael Joe M. wrote on 1/31/21 5:37 PM:

While I haven't measured, the 996 P2 sure looks like a dead ringer size-wise of my BCT 15X. I will measure them tomorrow and share the info unless someone else bests me to it! 73 Wally,

The SDS200 is a 1.5 DIN size, so that will not work. The BCD996P2 is the latest model that is a DIN size. Joe M.

I've got a BCT15X in my truck mounted in a console with a custom faceplate. I'm interested in upgrading to P25 digital capability, but need something that fits the same mount. I've looked at the

About 10min ago, 0655Z 25Dec20, he was reported over Mexico by the USAF who track him every xmas Another terrific NDB day in Nebraska!DonMore Live & Recorded Radio Fun and a Whole

5:00 pm in Los Angeles. "BOLO" reports for Santa have started with the LAPD.

Admin: This is a phishing expedition, appearing in multiple groups, please take the usual precautions. Rick NK7I