I have 2 Pro-96's still going strong ... and a Pro-94 & Pro-26 (my Pro-34 finally died a while back).... Look at post #25 on this thread, it describes some internal adjustments you can make to improve

All… Lurker here The Pro-96 scanner was a pretty good unit in it day.. Best of luck in getting it repaired. Regarding getting a scanner repaired. I think Keith is probably right-Uniden

https://forums.radioreference.com/threads/sentinel-update-error.394542/

Service types were checked

Eddie, I managed a Radio Shack in the early nineties, so this info may be out of date. RS did have their own repair facilities in various locations around the country. If you don't have a local RS

Someone recently posted they got their Whistler scanners repaired there. Joe M.

Did you check all of the service types you are interested in? You can either do that in Sentinel or on the unit itself.

The Pro-96 is Radio Shack, but I did hear a few years ago that Uniden will repair Radio Shack scanners, but don’t know if that is still the case.

Eddie, out of curiosity I did a bit of Internet searching. I’m assuming that by “PRO-96”, you mean the old Radio Shack PRO-96. Nice scanner in its day. As with anything with chips in it,

I am getting the following error when attempting updates for either my HP1 or BCD536 and I have also tried from different computers with the same result. Suggestions for resolving would be

Get the Uniden BCD325 scanner. only $325 or so. On 9/21/2021 6:25 AM, chuck uphold via groups.io wrote:

Go on the Internet and look for a used one. That’s what I would do.

I was in Nags Head, NC last week and tried to listen to their police and fire channels. Radio Reference and Sentinel shows them in VIPER and a local system. I tried both of them and neither would

G&G in New York? Joe M.

The Pro-96 was not made by Uniden; it was made by GRE. Neither Radio Shack nor Whistler, the company that bought what was left of GRE some years ago, will service it. I have a Pro-95 with the

Last time I knew uniden will repair to Factory condition any uniden radio for $100 no matter what is wrong with it OR send you a discount coupon for a new radio Depending on how much work it needs On

Hi Eddie, not sure on how much it will cost, but I believe that Uniden will repair some Radio Shack stuff.

yes there is a radio shop the workks on them.ill get the adress & post it.i think i got it from joe or someone onhere

Just a quick question. I have still functioning Pro-96, but I need to get it re-aligned as it has drifted off frequency and doesn't receive as well as it did years ago and I also believe the BNC

Well, to help the OP solve his problem, yeah, it does. May mean the difference between "They went encrypted, you won't be able to hear them" and "Oh, they just changed the talkgroup ID numbers. You