used hear all, all sudden no audio. does encryptions make noise or silent?

Have you ever heard anything on this ID? If it shows up but no audio it probably went encrypted.

A link to the system would help....

i have talk group of kcpd and all of sudden get nothing maybe flash on screen, no audio. any ideas?

Thanks, Joe, I will try that. Very much appreciated. Harvey K1DJG From: <main@Uniden.groups.io> on behalf of "Joe M. via groups.io" <mch@...> Reply-To: "main@Uniden.groups.io"

Then you will have to use the menu to set the scan selection to scan them. MENU SET SCAN SELECTION SELECT LISTS TO MONITOR (scroll through them and turn on the ones you want to monitor) Joe M.

No, they did not From: <main@Uniden.groups.io> on behalf of "Joe M. via groups.io" <mch@...> Reply-To: "main@Uniden.groups.io" <main@Uniden.groups.io> Date: Friday, September 17, 2021 at 1:30

Did the seller assign Quick Keys to them? Joe M.

I purchased an SD100 and had the seller program a bunch of my “favorite” groups. In the menu, I can see a list of all my groups, however I need some instruction in learning how to select the one

Bob, And yes, you'll likely need access to a computer running Windows (Parallels on MacOS--at least prior to the M1 chip--should be OK too), at least for the use of EZ-SCAN (Whistler) and/or Sentinel

Thanks Joe.

Having lived and traveled the area all of my life, the SDS100/200 is definitely the way to go. Prince Georges is on a Phase 2 system and the eastern shore is on a mostly Simulcast Phase 1/2 on the

I do, I simply deal with the Sites that are Appended, at creation, because you can't reAppend Sites once they are deleted, at least not without a convoluted ordeal, or third-party paid software.

Ouch. Sorry to hear that. Be aware that a lot of the Eastern Shore is going encripted.

The SDS series literally scans slower, but you also have people making unfair comparisons, scanning different things, with different reception styles between the BCDx36HP series and the SDS series.

I don't live in NJ, but in an area with a large statewide simulcast system. I only recently figured out what a huge difference it made in boot-up time to delete sites I won't access. 20 seconds turned

If it's a single zone simulcast system all the sites will have the same frequencies so you only need put it in once. If they have multiple zones you can program any that might be in range of your

1) Anyone here from NJ? If so, what county? 2) When you program a simulcast system , do you put in all the sites? TIA

If you are in Cleveland (or any other urban area) or very close to a busy tower, the unit will scan slower due to RF saturation. If you are in a rural area, it will scan faster. Joe M.