main@Uniden.groups.io

Home Messages Hashtags Subgroups

Messages

Between

and

Backing up, if you program the channel as NFM or FM analog conventional and hold on it, do you hear ANYTHING or see any indication that the radio is receiving a signal? Quoting Maggie O'Connor

By n3ltq · #1404 ·

Re: Ludlow, MA - DMR

Gary - You're right re threshold not at the Dept Level. I set it to Manual. Joel - Re - "Try changing the NFM to Digital using Sentinel" NFM shows up at the frequency level as Auto in Sentinel.

By Maggie O'Connor · #1403 ·

Re: Ludlow, MA - DMR

Hi Joel, I will try that, but probably not until tomorrow. I will let you know. Thank you.

By Maggie O'Connor · #1402 ·

Re: Ludlow, MA - DMR

For trunk systems, I think it's at the Site Level. For conventional it's set at the System level. For the 436HP, I don't see threshold levels at the Department Level. Also, make sure Threshold is

By Gary Saffer · #1401 ·

Re: Ludlow, MA - DMR

Try changing the NFM to Digital using Sentinel Joel R Kahn On Tuesday, May 11, 2021, 10:04:32 PM EDT, Maggie O'Connor

By Joel Kahn · #1400 ·

Re: Ludlow, MA - DMR

Thanks Gary. I find that setting at the Department level, and it's an 8. I then "thought" I found it for the Municipality (and it was an 8) but I can't find it again!

By Maggie O'Connor · #1399 ·

Re: Ludlow, MA - DMR

Check the digital threshold level. For DMR I usually use 8.

By Gary Saffer · #1398 ·

Re: Ludlow, MA - DMR

Hi There, BCD436HP with DMR License. I made new FL which included Ludlow, MA which is now on DMR. I am sure the FL came down and I see Ludlow in there - 453.250. It shows NFM Color Code 5 and I'm

By Maggie O'Connor · #1397 ·

Re: Amplified Speaker

Someone made a comment We do not need an Amplified Speaker a regular external one will work .Yes but the reason I did it on my SDS-100 The audio on VHF/UHF Analog if I turned just the

By KA9QJG · #1396 ·

Re: Amplified Speaker

Yep. Earphones are typically 1000ohms, most non piezo speakers like HSN4031A are 8ohms Wont get any volume out of an earphone socket if you stick it in there. Basic ohms law applies.... Mike de

By GM7BNF · #1395 ·

Re: Amplified Speaker

On 05/09/2021 14:35, Teton Amateur Radio Repeater Association (TARRA) wrote: The HSN4031A is a non-amplified speaker. Will not get driven well from a headphone jack. It will

By Jim Walls · #1394 ·

Re: Amplified Speaker

And "your radios" are using the EARPHONE output with this? Joe M.

By Joe M. · #1393 ·

Re: Amplified Speaker

I use something like this on my radios: HSN4031A There is plenty of level without an additional amp. I'm sure that Motorola spent a lot of time and money on engineering a speaker that is not

By Teton Amateur Radio Repeater Association (TARRA) · #1392 ·

Re: Amplified Speaker

As I said before, my personal favorites are the amplified Motorola or GE speakers like the image that was recently posted (by someone else). Joe M.

By Joe M. · #1391 ·

Re: Amplified Speaker

Joe, Is there one (or two) you recommend? Thanks - Maggie

By Maggie O'Connor · #1390 ·

Re: Amplified Speaker

It might be easier and cheaper to just buy an amplified speaker. Joe M.

By Joe M. · #1389 ·

Re: Amplified Speaker

Hey Don, How is it wired to your scanner? Is it powered by a separate power source? I have a Motorola speaker that is not powered. No model number, looks like yours, but only has 2 wires coming from

By Joe Burns · #1388 ·

Re: Amplified Speaker

On My SDS-100 If I turn the audio up especially on VHF/UHF Analog I get the loid hissing , I like anything Motorola so I got this Motorola Amplified Speaker Now All I have to do is just turn up

By KA9QJG · #1387 ·

Re: Amplified Speaker

HERE'S AN AMPLIFIED SPEAKER THAT SHOULD WORK. Uniden (BC23A) Bearcat 15-Watt Amplified External Communications Speaker. Durable Rugged Design, Perfect for Amplifying Uniden Scanners, CB Radios, and

By John Irvine <chasebiz@...> · #1386 ·

Re: No sound on search results.

Next question: Are you sure it is not trunked? Joe M.

By Joe M. · #1385 ·

761 - 780 of 2145

Home Hashtags Subgroups About Features Pricing Updates Terms Help Twitter