Joe, Is there one (or two) you recommend? Thanks - Maggie

It might be easier and cheaper to just buy an amplified speaker. Joe M.

Hey Don, How is it wired to your scanner? Is it powered by a separate power source? I have a Motorola speaker that is not powered. No model number, looks like yours, but only has 2 wires coming from

On My SDS-100 If I turn the audio up especially on VHF/UHF Analog I get the loid hissing , I like anything Motorola so I got this Motorola Amplified Speaker Now All I have to do is just turn up

HERE'S AN AMPLIFIED SPEAKER THAT SHOULD WORK. Uniden (BC23A) Bearcat 15-Watt Amplified External Communications Speaker. Durable Rugged Design, Perfect for Amplifying Uniden Scanners, CB Radios, and

Next question: Are you sure it is not trunked? Joe M.

Its not amplified wont run off of an earphone socket no.

I programmed the System as a Conventional and set the Audio as Digital in the settings. Coming in loud and clear on the Uniden as well as the TRX1.

Where does it show that speaker (below) as an AMPLIFIED speaker? It looks like a very simple 5-watt, 8-ohm speaker. There is nothing so show amplification or power. Dewey

Got it! Thank you so much. Maggie

This is a great little amplified speaker. Just connect the power lead to the something powered off the ACC position of your ignition switch and ypu should be good to

Is the channel set for analog only? Joe M.

I moved my two BCD536HP's to a different location in the office for convenience and now I cannot get audio out of one. Is there possibly a muting function I enabled during the move? Even tried with

Interesting thought about the BCT15X. You can specify which channels go to the recording output. So, you could send your priority or important channels to the record output and connect an amplified

BCT15X recording output connected to aux in on Pioneer CD/radio. Sounds good! Allows separate volume control of scanner's built-in speaker, too.

i seen a work around for the speaker on rr somewere.u can add a resistor on the board to by pass that feathre

I use a Bluetooth transmitter plugged in to the top of the HP436 and pair it to a Bose Sound Link speaker. You can turn the volume up with the Bluetooth speaker. Sent from Yahoo Mail for iPad

I have had no issues with my BC23A Tim, KD6MDV

I use the PM23 with my 325P2 and it works great. Sent from the all new AOL app for iOS

I have the BC23A Uniden speaker installed in my vehicle for my HP436. Great sound and volume but I really don't like the AUTO OFF feature. If there isn't constant radio traffic and the radio is