I programmed the System as a Conventional and set the Audio as Digital in the settings. Coming in loud and clear on the Uniden as well as the TRX1.

Where does it show that speaker (below) as an AMPLIFIED speaker? It looks like a very simple 5-watt, 8-ohm speaker. There is nothing so show amplification or power. Dewey

Got it! Thank you so much. Maggie

This is a great little amplified speaker. Just connect the power lead to the something powered off the ACC position of your ignition switch and ypu should be good to

Is the channel set for analog only? Joe M.

I moved my two BCD536HP's to a different location in the office for convenience and now I cannot get audio out of one. Is there possibly a muting function I enabled during the move? Even tried with

Interesting thought about the BCT15X. You can specify which channels go to the recording output. So, you could send your priority or important channels to the record output and connect an amplified

BCT15X recording output connected to aux in on Pioneer CD/radio. Sounds good! Allows separate volume control of scanner's built-in speaker, too.

i seen a work around for the speaker on rr somewere.u can add a resistor on the board to by pass that feathre

I use a Bluetooth transmitter plugged in to the top of the HP436 and pair it to a Bose Sound Link speaker. You can turn the volume up with the Bluetooth speaker. Sent from Yahoo Mail for iPad

I have had no issues with my BC23A Tim, KD6MDV

I use the PM23 with my 325P2 and it works great. Sent from the all new AOL app for iOS

I have the BC23A Uniden speaker installed in my vehicle for my HP436. Great sound and volume but I really don't like the AUTO OFF feature. If there isn't constant radio traffic and the radio is

Then patching to Aux, Cassette adapter or FM modulator are all perfect solutions allowing sound to be played on the car stereo as loud as you like. But, then again, using an earphone is cheap and

Thanks to the hint from Joe M, when I opened a hpd file with Notpad++ I got a text file. Thanks Joe

Thanks everyone for the input! Those of you who run the BC23A Uniden speaker do you find issues with the auto off feature on this speaker? Have you disabled it? Good input on the aux input through the

I have a Uniden BC23A in my Can Am Side x Side for my intercom & VHF radio and it works great and is very rugged and I highly recommend this speaker. Good luck. Wayne Powell

Like everyone else, I have a 436, run it through the speakers in my car with the Aux cord. I have a Honda Accord Hybrid. It works great. Plus is you can turn it up or down with the volume controls

Actually, what I said was "the 43(6) does not have an external speaker jack." (typo corrected) It DOES have an earphone jack which is not the same as an external speaker jack. Joe M.

Yikes! I lept before looking; seeing Joe M's response about no audio output on the 436.....Maybe a headphone jack can be added from the speaker to the case.