Does Sentinel have the ability to change the service type selection when making changes or adding to favorite lists ? If so, how can this be prevented ? I have the 436hp.

The record jack is a 1/8” jack. I have two cords at least, that I can use. I’ll take a look at that with the earbuds like you suggested Don. Thanks!

I would expect the record out jack to output audio to patch with a cord to a recorder. Take a look at the jack to tell what size the cord needs to be. Preview the sound with an earbud to know what

Can the 7200 be plugged into the record jack on the back of the 996P2?

Someone suggested getting an older Android phone and downloading the Voice Activated Recorder app to it. I tried it on my own Galaxy. phone and it worked, but I want to be able to plug it into the

Yes, I was just looking at the 7200 on EBay for $25US, or$31.25 Canadian. Shipping is about $34 cdn. I’ll have a look around the area here first though.

The Olympus VN-7200 should only cost around $30, not $91.

Now's the time to invest in a digital voice recorder with VOX. I suggest the Olympus vn-7200. it's very economical on batteries and has a built-in mic. It can run for days on one set of batteries. If

Yes, I was looking at the one on EBay for $91US. Good price compared to the other higher priced ones there.

Thanks for all the reply’s. I’ll check some more sources in my area again and see if I can come up with a something I can use. I used to have an old portable cassette recorder years ago that was

On some systems the Control Channel changes frequencies, sometimes everyday, sometimes at midnight. On Fri, Apr 16, 2021 at 3:26 PM Kev Myles via groups.io <wkevinm@...> wrote: --

I was hearing voices on 854.8125 yesterday and the day before, but today silence and after a little while a steady buzzing noise. Control channel? Didn’t pick up any other 800 MHz frequencies for

Just as an FYI:- I had to send my SDS100 back to Uniden for repair. Whenever I turned it on, it would download the appropriate databases then immediately make a rhythmic open and close squelch sound.

On which? DMR? You shouldn't hear anything on encrypted or a DMR control channel - unless you don't have the DMR activated.

I made a few adjustments and it seems to be working a lot better now. Unchecked the boxes in Limit search from P25, NXDN, etc., set the Adc and Dac to default values. I set the dsp to default 64.

on my scanner it make a bunch of noise .

On control channels you hear nothing. You see the color code, and usually the slot flashes between 1 and 2. Joe M.

Ok, I see. I though there would be a tone, or noise of some sort. I noticed in the TRX1 manual on page 61 that the ADC and DAC default settings are+0dB and DSP Level Adapt is 64 so I just reset it to

I believe encrypted traffic would be silent / no sound. Control channel I can't recall what you'd hear, if anything. <wkevinm@...> wrote:

Yes Sir, that could be the case, but it was silent, no sound. EncMode was on Tone and EncLevel -24. The Adc gain -2. DacGain -5. The later two settings I found on Radio Reference. “Especially for