Date   

Programming CT STATE POLICE ON MY 536

gil kellersman
 

Can someone help me with programming the current CT ST Police frequencies on my 536, thank you, Gil


Re: bcd436hp

Jason Houk
 

Which scanner are you trying to program? Columbus is a pretty large metropolitan area, therefore I would also need to know what all you're wanting to listen to as well as where you are located at?


On Fri, Apr 17, 2020 at 10:26 AM ROGER EATON <rsdk45@...> wrote:
Is there anybody in Columbus Ohio that can help me program my scanner for Columbus?

On Tue, Apr 14, 2020 at 6:11 AM Mark Lassman via groups.io <kb6kgx=mac.com@groups.io> wrote:
Try taking the card out and putting it back in again. That may fix it. Or, you may have to reformat the card, if that doesn’t work.

The same thing happened to me with my 536. I removed the card and put it back in. Worked fine.


On Apr 8, 2020, at 5:46 PM, ROGER EATON <rsdk45@...> wrote:

Help I have a Homepatrol 2 that has a sd card error what do I need to do?
 
Roger eaton
 
Sent from Mail for Windows 10
 

Virus-free. www.avast.com



--
Jason L Houk
+1-740-802-1433 Cell
+1-614-434-6850 Google


Re: bcd436hp

ROGER EATON
 

Is there anybody in Columbus Ohio that can help me program my scanner for Columbus?

On Tue, Apr 14, 2020 at 6:11 AM Mark Lassman via groups.io <kb6kgx=mac.com@groups.io> wrote:
Try taking the card out and putting it back in again. That may fix it. Or, you may have to reformat the card, if that doesn’t work.

The same thing happened to me with my 536. I removed the card and put it back in. Worked fine.


On Apr 8, 2020, at 5:46 PM, ROGER EATON <rsdk45@...> wrote:

Help I have a Homepatrol 2 that has a sd card error what do I need to do?
 
Roger eaton
 
Sent from Mail for Windows 10
 

Virus-free. www.avast.com


Re: bcd436hp

Mark Lassman
 

Try taking the card out and putting it back in again. That may fix it. Or, you may have to reformat the card, if that doesn’t work.

The same thing happened to me with my 536. I removed the card and put it back in. Worked fine.


On Apr 8, 2020, at 5:46 PM, ROGER EATON <rsdk45@...> wrote:

Help I have a Homepatrol 2 that has a sd card error what do I need to do?
 
Roger eaton
 
Sent from Mail for Windows 10
 

Virus-free. www.avast.com


Re: SDS200 cable driver- USB?

Bernard Skoch
 

Steve,

I have found that on my CF-53 Toughbook all USB ports are not the same. Have you tried different ports?

Bernie

On Apr 10, 2020, at 23:23, Steve Garwood <n0czv@...> wrote:

Bernie,

I first tried Windows 7, I was able to download and run the driver on the Uniden website, might have been the ScannerMaster site. This finally worked, but I was unable to see the micro SD card. I switched to a Windows 10 laptop... still had to manually download the driver. Still not able to see the micro SD card. Both were Panasonic Toughbooks.

Switched to a ruggedized Dell Windows 7 laptop... again had to download the driver, as the automatic process didn’t find anything. With the Dell, I was able to see the the micro SD and run through the firmware and database up processes. Don’t know why it has been so difficult.

And thanks to all that got me headed in the right direction!

Steve
On Apr 10, 2020, at 08:13, Bernard Skoch via groups.io <k5xs@...> wrote:

Steve,

What version of Windows are you running?

Bernie

On Apr 10, 2020, at 00:42, Byron Myers via groups.io <emtd99@...> wrote:
It looks like there isn’t any driver software for it. I checked Scanner master website , they have the cable , but without a cd . I believe if it did have driver included it would be sold with it. It most likely is preloaded on windows
On Apr 9, 2020, at 19:22, Joe M. <mch@...> wrote:
It should be in just about any version of
Windows. It's a standard flash drive driver.

If it's not showing properly in Device Manager remove the
device and then unplug/plug and let Windows install it again.

Joe M.

On 4/9/2020 6:54 PM, Steve Garwood wrote:
Can anyone give me any information as to getting ahold of a software driver for the SDS200 cable driver software? Not having luck so far.

Thanks!

Steve

Sent from my iPhone 8 Plus














Re: SDS200 cable driver- USB?

Joe M.
 

The fact that your Windows PCs are having trouble installing a simple flash drive driver implies there are issues with the installation.

Go into Device Manager, remove whatever drivers are installed, then unplug the scanner, wait 8 seconds, plug it in again and hope the PC will install the correct drivers. If it cannot there is an issue with that PC or the Windows installation. Make sure Windows is up to date.

There is nothing unique about the scanner driver.
It appears to be a simple flash drive to the PC.

Joe M.

On 4/10/2020 9:29 PM, Steve Garwood wrote:
Bernie,

I first tried Windows 7, I was able to download and run the driver on the Uniden website, might have been the ScannerMaster site. This finally worked, but I was unable to see the micro SD card. I switched to a Windows 10 laptop... still had to manually download the driver. Still not able to see the micro SD card. Both were Panasonic Toughbooks.

Switched to a ruggedized Dell Windows 7 laptop... again had to download the driver, as the automatic process didn’t find anything. With the Dell, I was able to see the the micro SD and run through the firmware and database up processes. Don’t know why it has been so difficult.

And thanks to all that got me headed in the right direction!

Steve
On Apr 10, 2020, at 08:13, Bernard Skoch via groups.io <k5xs@...> wrote:

Steve,

What version of Windows are you running?

Bernie

On Apr 10, 2020, at 00:42, Byron Myers via groups.io <emtd99@...> wrote:

It looks like there isn’t any driver software for it. I checked Scanner master website , they have the cable , but without a cd . I believe if it did have driver included it would be sold with it. It most likely is preloaded on windows
On Apr 9, 2020, at 19:22, Joe M. <mch@...> wrote:
It should be in just about any version of
Windows. It's a standard flash drive driver.

If it's not showing properly in Device Manager remove the
device and then unplug/plug and let Windows install it again.

Joe M.

On 4/9/2020 6:54 PM, Steve Garwood wrote:
Can anyone give me any information as to getting ahold of a software driver for the SDS200 cable driver software? Not having luck so far.

Thanks!

Steve

Sent from my iPhone 8 Plus














Re: SDS200 cable driver- USB?

Steve Garwood
 

Bernie,

I first tried Windows 7, I was able to download and run the driver on the Uniden website, might have been the ScannerMaster site. This finally worked, but I was unable to see the micro SD card. I switched to a Windows 10 laptop... still had to manually download the driver. Still not able to see the micro SD card. Both were Panasonic Toughbooks.

Switched to a ruggedized Dell Windows 7 laptop... again had to download the driver, as the automatic process didn’t find anything. With the Dell, I was able to see the the micro SD and run through the firmware and database up processes. Don’t know why it has been so difficult.

And thanks to all that got me headed in the right direction!

Steve

On Apr 10, 2020, at 08:13, Bernard Skoch via groups.io <k5xs@...> wrote:

Steve,

What version of Windows are you running?

Bernie

On Apr 10, 2020, at 00:42, Byron Myers via groups.io <emtd99@...> wrote:

It looks like there isn’t any driver software for it. I checked Scanner master website , they have the cable , but without a cd . I believe if it did have driver included it would be sold with it. It most likely is preloaded on windows
On Apr 9, 2020, at 19:22, Joe M. <mch@...> wrote:
It should be in just about any version of
Windows. It's a standard flash drive driver.

If it's not showing properly in Device Manager remove the
device and then unplug/plug and let Windows install it again.

Joe M.

On 4/9/2020 6:54 PM, Steve Garwood wrote:
Can anyone give me any information as to getting ahold of a software driver for the SDS200 cable driver software? Not having luck so far.

Thanks!

Steve

Sent from my iPhone 8 Plus












Re: SDS200 cable driver- USB?

Joe M.
 

Link 1 is for the serial comms drivers.

Link 2 is for a Radio Shack cable.

Link 3 is for the USB-1.

None of them are for the SDS series.

Joe M.

On 4/10/2020 6:15 AM, kline Rick via groups.io wrote:
perhaps this will help

https://www.scannermaster.com/driver_installation_uniden_police_scanners_a/385.htm


https://www.scannermaster.com/police_scanner_software_downloads_a/214.htm

towards the bottom of this page is instructions on a usb cable driver

https://www.scannermaster.com/USB_Cable_p/01-551038.htm

On 4/9/2020 6:54 PM, Steve Garwood wrote:
software driver for the SDS200 cable driver


Re: SDS200 cable driver- USB?

Bernard Skoch
 

Steve,

What version of Windows are you running?

Bernie

On Apr 10, 2020, at 00:42, Byron Myers via groups.io <emtd99@...> wrote:

It looks like there isn’t any driver software for it. I checked Scanner master website , they have the cable , but without a cd . I believe if it did have driver included it would be sold with it. It most likely is preloaded on windows
On Apr 9, 2020, at 19:22, Joe M. <mch@...> wrote:

It should be in just about any version of
Windows. It's a standard flash drive driver.

If it's not showing properly in Device Manager remove the
device and then unplug/plug and let Windows install it again.

Joe M.

On 4/9/2020 6:54 PM, Steve Garwood wrote:
Can anyone give me any information as to getting ahold of a software driver for the SDS200 cable driver software? Not having luck so far.

Thanks!

Steve

Sent from my iPhone 8 Plus










Re: SDS200 cable driver- USB?

kline Rick
 

On 4/9/2020 6:54 PM, Steve Garwood wrote:
software driver for the SDS200 cable driver


Re: SDS200 cable driver- USB?

Byron Myers
 

It looks like there isn’t any driver software for it. I checked Scanner master website , they have the cable , but without a cd . I believe if it did have driver included it would be sold with it. It most likely is preloaded on windows

On Apr 9, 2020, at 19:22, Joe M. <mch@...> wrote:

It should be in just about any version of
Windows. It's a standard flash drive driver.

If it's not showing properly in Device Manager remove the
device and then unplug/plug and let Windows install it again.

Joe M.

On 4/9/2020 6:54 PM, Steve Garwood wrote:
Can anyone give me any information as to getting ahold of a software driver for the SDS200 cable driver software? Not having luck so far.

Thanks!

Steve

Sent from my iPhone 8 Plus








Re: SDS200 cable driver- USB?

Kurt WA3TOY
 

I never had to do any type of driver down load.

-----Original Message-----
From: main@Uniden.groups.io On Behalf Of Steve Garwood
Sent: Thursday, April 9, 2020 18:54
To: main@Uniden.groups.io
Subject: [Uniden] SDS200 cable driver- USB?

Can anyone give me any information as to getting ahold of a software driver
for the SDS200 cable driver software? Not having luck so far.

Thanks!

Steve

Sent from my iPhone 8 Plus


Re: SDS200 cable driver- USB?

Joe M.
 

It should be in just about any version of
Windows. It's a standard flash drive driver.

If it's not showing properly in Device Manager remove the
device and then unplug/plug and let Windows install it again.

Joe M.

On 4/9/2020 6:54 PM, Steve Garwood wrote:
Can anyone give me any information as to getting ahold of a software driver for the SDS200 cable driver software? Not having luck so far.

Thanks!

Steve

Sent from my iPhone 8 Plus







SDS200 cable driver- USB?

Steve Garwood
 

Can anyone give me any information as to getting ahold of a software driver for the SDS200 cable driver software? Not having luck so far.

Thanks!

Steve

Sent from my iPhone 8 Plus


Re: bcd436hp

ROGER EATON
 

Thanks I played with it last night, I too are just learning.



Sent from my Verizon, Samsung Galaxy smartphone


-------- Original message --------
From: Mike Bott <mbott001@...>
Date: 4/9/20 9:34 AM (GMT-05:00)
To: main@Uniden.groups.io
Subject: Re: [Uniden] bcd436hp

[Edited Message Follows]

Roger,  (Sorry Joe)

Being very new to scanning, all I initially did was add the Franklin County Statewide entries and the Delaware County Systems to my Favorites List.  This covers the things here in central Ohio that I wanted to be able to monitor,  Then, I can avoid those that I don't want as they come up and reduce the numbers by range limiting/Service Type selection.  I'm sure as I learn the HP-II and the Sentinel software, I'll fine tune my approach.

--
Mike

On 4/8/20 9:08 PM, ROGER EATON wrote:

Again Thanks for the help.  Do you know anything about Columbus Ohio police

 

Sent from Mail for Windows 10

 

From: Joe M.
Sent: Wednesday, April 8, 2020 9:06 PM
To: main@uniden.groups.io
Subject: Re: [Uniden] bcd436hp

 

If this is on the same card, I would get another one as a back-up ASAP.

(note: you can go larger if you record on it - for larger storage)

 

Joe M.

 

On 4/8/2020 9:01 PM, ROGER EATON wrote:

> Thanks clearing the user data worked

> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for

> Windows 10

> *From: *Joe M. <mailto:mch@...>

> *Sent: *Wednesday, April 8, 2020 8:49 PM

> *To: *main@uniden.groups.io <mailto:main@uniden.groups.io>

> *Subject: *Re: [Uniden] bcd436hp

> Replace the card, CLEAR USER DATA in

> Sentinel, then reload your programming.

> You can first try to remove and re-seat

> the card, but likely it needs replaced.

> Joe M.

> On 4/8/2020 8:46 PM, ROGER EATON wrote:

>  > Help I have a Homepatrol 2 that has a sd card error what do I need to do?

>  >

>  > Roger eaton

>  >

>  > Sent from Mail <https://go.microsoftcom/fwlink/?LinkId=550986> for

>  > Windows 10

>  >

>  >

>  >

> <https://wwwavast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>

>  >             Virus-free. www.avast.com

>  >

> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>

>  >

>  >

>  > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

>  >

>

 

 

 


Re: bcd436hp

Mike Bott <mbott001@...>
 
Edited

Roger,  (Sorry Joe)

Being very new to scanning, all I initially did was add the Franklin County Statewide entries and the Delaware County Systems to my Favorites List.  This covers the things here in central Ohio that I wanted to be able to monitor,  Then, I can avoid those that I don't want as they come up and reduce the numbers by range limiting/Service Type selection.  I'm sure as I learn the HP-II and the Sentinel software, I'll fine tune my approach.

--
Mike


On 4/8/20 9:08 PM, ROGER EATON wrote:

Again Thanks for the help.  Do you know anything about Columbus Ohio police

 

Sent from Mail for Windows 10

 

From: Joe M.
Sent: Wednesday, April 8, 2020 9:06 PM
To: main@uniden.groups.io
Subject: Re: [Uniden] bcd436hp

 

If this is on the same card, I would get another one as a back-up ASAP.

(note: you can go larger if you record on it - for larger storage)

 

Joe M.

 

On 4/8/2020 9:01 PM, ROGER EATON wrote:

> Thanks clearing the user data worked

> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for

> Windows 10

> *From: *Joe M. <mailto:mch@...>

> *Sent: *Wednesday, April 8, 2020 8:49 PM

> *To: *main@uniden.groups.io <mailto:main@uniden.groups.io>

> *Subject: *Re: [Uniden] bcd436hp

> Replace the card, CLEAR USER DATA in

> Sentinel, then reload your programming.

> You can first try to remove and re-seat

> the card, but likely it needs replaced.

> Joe M.

> On 4/8/2020 8:46 PM, ROGER EATON wrote:

>  > Help I have a Homepatrol 2 that has a sd card error what do I need to do?

>  >

>  > Roger eaton

>  >

>  > Sent from Mail <https://go.microsoftcom/fwlink/?LinkId=550986> for

>  > Windows 10

>  >

>  >

>  >

> <https://wwwavast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>

>  >             Virus-free. www.avast.com

>  >

> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>

>  >

>  >

>  > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

>  >

>

 

 

 


Re: bcd436hp

ROGER EATON
 

Thanks

On Wed, Apr 8, 2020 at 9:19 PM Joe M. <mch@...> wrote:
I believe they are on MARCS-IP and are on a simulcast site.

Not a lot beyond that.

Joe M.

On 4/8/2020 9:08 PM, ROGER EATON wrote:
> Again Thanks for the help.  Do you know anything about Columbus Ohio police
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
> *From: *Joe M. <mailto:mch@...>
> *Sent: *Wednesday, April 8, 2020 9:06 PM
> *To: *main@uniden.groups.io <mailto:main@uniden.groups.io>
> *Subject: *Re: [Uniden] bcd436hp
>
> If this is on the same card, I would get another one as a back-up ASAP.
>
> (note: you can go larger if you record on it - for larger storage)
>
> Joe M.
>
> On 4/8/2020 9:01 PM, ROGER EATON wrote:
>
>  > Thanks clearing the user data worked
>
>  >
>
>  > Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
>
>  > Windows 10
>
>  >
>
>  > *From: *Joe M. <mailto:mch@...>
>
>  > *Sent: *Wednesday, April 8, 2020 8:49 PM
>
>  > *To: *main@uniden.groups.io <mailto:main@uniden.groups.io>
>
>  > *Subject: *Re: [Uniden] bcd436hp
>
>  >
>
>  > Replace the card, CLEAR USER DATA in
>
>  >
>
>  > Sentinel, then reload your programming.
>
>  >
>
>  > You can first try to remove and re-seat
>
>  >
>
>  > the card, but likely it needs replaced.
>
>  >
>
>  > Joe M.
>
>  >
>
>  > On 4/8/2020 8:46 PM, ROGER EATON wrote:
>
>  >
>
>  >  > Help I have a Homepatrol 2 that has a sd card error what do I need
> to do?
>
>  >
>
>  >  >
>
>  >
>
>  >  > Roger eaton
>
>  >
>
>  >  >
>
>  >
>
>  >  > Sent from Mail <https://go.microsoftcom/fwlink/?LinkId=550986> for
>
>  >
>
>  >  > Windows 10
>
>  >
>
>  >  >
>
>  >
>
>  >  >
>
>  >
>
>  >  >
>
>  >
> <https://wwwavast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>
>
>  >
>
>  >  >             Virus-free. www.avast.com
>
>  >
>
>  >  >
>
>  >
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>
>
>  >
>
>  >  >
>
>  >
>
>  >  >
>
>  >
>
>  >  > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
>  >
>
>  >  >
>
>  >
>
>  >
>
>




Re: bcd436hp

Joe M.
 

I believe they are on MARCS-IP and are on a simulcast site.

Not a lot beyond that.

Joe M.

On 4/8/2020 9:08 PM, ROGER EATON wrote:
Again Thanks for the help. Do you know anything about Columbus Ohio police

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows 10

*From: *Joe M. <mailto:mch@...>
*Sent: *Wednesday, April 8, 2020 9:06 PM
*To: *main@uniden.groups.io <mailto:main@uniden.groups.io>
*Subject: *Re: [Uniden] bcd436hp

If this is on the same card, I would get another one as a back-up ASAP.

(note: you can go larger if you record on it - for larger storage)

Joe M.

On 4/8/2020 9:01 PM, ROGER EATON wrote:

> Thanks clearing the user data worked

>

> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for

> Windows 10

>

> *From: *Joe M. <mailto:mch@...>

> *Sent: *Wednesday, April 8, 2020 8:49 PM

> *To: *main@uniden.groups.io <mailto:main@uniden.groups.io>

> *Subject: *Re: [Uniden] bcd436hp

>

> Replace the card, CLEAR USER DATA in

>

> Sentinel, then reload your programming.

>

> You can first try to remove and re-seat

>

> the card, but likely it needs replaced.

>

> Joe M.

>

> On 4/8/2020 8:46 PM, ROGER EATON wrote:

>

> > Help I have a Homepatrol 2 that has a sd card error what do I need
to do?

>

> >

>

> > Roger eaton

>

> >

>

> > Sent from Mail <https://go.microsoftcom/fwlink/?LinkId=550986> for

>

> > Windows 10

>

> >

>

> >

>

> >

>
<https://wwwavast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>

>

> > Virus-free. www.avast.com

>

> >

>
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>

>

> >

>

> >

>

> > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

>

> >

>

>


Re: bcd436hp

ROGER EATON
 

Again Thanks for the help.  Do you know anything about Columbus Ohio police

 

Sent from Mail for Windows 10

 

From: Joe M.
Sent: Wednesday, April 8, 2020 9:06 PM
To: main@uniden.groups.io
Subject: Re: [Uniden] bcd436hp

 

If this is on the same card, I would get another one as a back-up ASAP.

(note: you can go larger if you record on it - for larger storage)

 

Joe M.

 

On 4/8/2020 9:01 PM, ROGER EATON wrote:

> Thanks clearing the user data worked

> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for

> Windows 10

> *From: *Joe M. <mailto:mch@...>

> *Sent: *Wednesday, April 8, 2020 8:49 PM

> *To: *main@uniden.groups.io <mailto:main@uniden.groups.io>

> *Subject: *Re: [Uniden] bcd436hp

> Replace the card, CLEAR USER DATA in

> Sentinel, then reload your programming.

> You can first try to remove and re-seat

> the card, but likely it needs replaced.

> Joe M.

> On 4/8/2020 8:46 PM, ROGER EATON wrote:

>  > Help I have a Homepatrol 2 that has a sd card error what do I need to do?

>  >

>  > Roger eaton

>  >

>  > Sent from Mail <https://go.microsoftcom/fwlink/?LinkId=550986> for

>  > Windows 10

>  >

>  >

>  >

> <https://wwwavast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>

>  >             Virus-free. www.avast.com

>  >

> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>

>  >

>  >

>  > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

>  >

>

 

 

 


Re: bcd436hp

Joe M.
 

If this is on the same card, I would get another one as a back-up ASAP.
(note: you can go larger if you record on it - for larger storage)

Joe M.

On 4/8/2020 9:01 PM, ROGER EATON wrote:
Thanks clearing the user data worked

Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
Windows 10

*From: *Joe M. <mailto:mch@...>
*Sent: *Wednesday, April 8, 2020 8:49 PM
*To: *main@uniden.groups.io <mailto:main@uniden.groups.io>
*Subject: *Re: [Uniden] bcd436hp

Replace the card, CLEAR USER DATA in

Sentinel, then reload your programming.

You can first try to remove and re-seat

the card, but likely it needs replaced.

Joe M.

On 4/8/2020 8:46 PM, ROGER EATON wrote:

> Help I have a Homepatrol 2 that has a sd card error what do I need to do?

>

> Roger eaton

>

> Sent from Mail <https://go.microsoftcom/fwlink/?LinkId=550986> for

> Windows 10

>

>

>
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>

> Virus-free. www.avast.com

>
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>

>

>

> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

>

1221 - 1240 of 1771