Date   

Re: ARC536 Comments please

Mike
 

I run both on the same computer, but not at the same time.  Joe M mentioned this, and I think he's right.  You would probably get a port conflict.  So, you will likely have to shut one down before starting the other.

I really liked Butel's software for the 396, so I bought it again for the 436.  As others have said, it takes extra care to keep both in sync, although that's not absolutely necessary as long as when you select one to use you are sure you put your latest programming in it, which can be taken from the radio at that time.
 
In my opinion, Sentinel makes it easier to add favorites lists.  You can use that feature to dump a lot of programming in the radio from Radio Reference easily without having to type it in.  It is also needed to update firmware, which I don't think Butel does at all.
 
I find Butel to be more user friendly.  Most of the functions are sort of right there in front of you when you go into a system.  With Sentinel, you have to know which subsection of the software to open up to do something.
 
Both have their advantages.  You could probably use only Sentinel and be able to do whatever you want.  But, I think it's convenient to have both, and then use whichever one is better for the task you want to do.  They will coexist on one computer when run one at a time.


Re: ARC536 Comments please

azpowells
 

 LOL, and devour both !

 Wayne

On 8/24/2020 5:19 PM, Manlius via groups.io wrote:
“If a cat always lands on his feet and a piece of buttered bread always lands on the buttered side...what would happen if you strapped a piece of buttered bread to a cat and dropped it?”

The dog would catch the cat before it hit the floor!


Re: ARC536 Comments please

Manlius
 

“If a cat always lands on his feet and a piece of buttered bread always lands on the buttered side...what would happen if you strapped a piece of buttered bread to a cat and dropped it?”

The dog would catch the cat before it hit the floor!


Re: ARC536 Comments please

Jim Adams
 

I use Butel and have never had any issues. HP laptop running Win10. Just remember to save everything before doing anything

On Monday, August 24, 2020, 12:40:15 PM PDT, Bob Turner <n2scj-lists@...> wrote:


It can be a little tricky keeping both Butel and Sentinal in sync. When you write to scanner with one, then read it back into the other before making changes with the other.  When you write it back then read back in the other.  It’s not the end of the world if you forget the write with one, read (and save) from the other routine.  You just might find something you changed In one undone by the other in areas they overlap.

 

Bob

 

From: main@Uniden.groups.io [mailto:main@Uniden.groups.io] On Behalf Of Marshall Tuttle
Sent: Monday, August 24, 2020 2:58 PM
To: main@uniden.groups.io
Subject: [Uniden] ARC536 Comments please

 

I am considering buying the Butel software. Looking for user comments and suggestions.  Will it coexist with Sentinel on a Win 10 PC?  This is my first post and my radio should arrive later this week.  I am in Colorado Springs CO.

Marshall T.


Re: ARC536 Comments please

Rich
 

yes.  I have both installed on my dell Win10 Pro laptop.

 

 

'73,
rich, n9dko
If a cat always lands on his feet and a piece of buttered bread always lands on the buttered side...what would happen if you strapped a piece of buttered bread to a cat and dropped it?

_________________________________

 

 

From: main@Uniden.groups.io [mailto:main@Uniden.groups.io] On Behalf Of Marshall Tuttle
Sent: Monday August 24, 2020 13:58 PM
To: main@uniden.groups.io
Subject: [Uniden] ARC536 Comments please

 

I am considering buying the Butel software. Looking for user comments and suggestions.  Will it coexist with Sentinel on a Win 10 PC?  This is my first post and my radio should arrive later this week.  I am in Colorado Springs CO.

Marshall T.


Re: ARC536 Comments please

Rich
 

that's precisely what I do. 

 

 

'73,
rich, n9dko
An apple a day keeps the doctor away....but if your aim is good it'll keep everyone away

_________________________________

 

 

From: main@Uniden.groups.io [mailto:main@Uniden.groups.io] On Behalf Of Bob Turner
Sent: Monday August 24, 2020 14:33 PM
To: main@Uniden.groups.io
Subject: Re: [Uniden] ARC536 Comments please

 

It can be a little tricky keeping both Butel and Sentinal in sync. When you write to scanner with one, then read it back into the other before making changes with the other.  When you write it back then read back in the other.  It’s not the end of the world if you forget the write with one, read (and save) from the other routine.  You just might find something you changed In one undone by the other in areas they overlap.

 

Bob

 

From: main@Uniden.groups.io [mailto:main@Uniden.groups.io] On Behalf Of Marshall Tuttle
Sent: Monday, August 24, 2020 2:58 PM
To: main@uniden.groups.io
Subject: [Uniden] ARC536 Comments please

 

I am considering buying the Butel software. Looking for user comments and suggestions.  Will it coexist with Sentinel on a Win 10 PC?  This is my first post and my radio should arrive later this week.  I am in Colorado Springs CO.

Marshall T.


Re: ARC536 Comments please

Terry Lightner
 

I use both. I only use Sentinel to update database and firmware. Butel is very easy to download the systems you want from RR.



On Mon, Aug 24, 2020 at 3:40 PM, Bob Turner
<n2scj-lists@...> wrote:

It can be a little tricky keeping both Butel and Sentinal in sync. When you write to scanner with one, then read it back into the other before making changes with the other.  When you write it back then read back in the other.  It’s not the end of the world if you forget the write with one, read (and save) from the other routine.  You just might find something you changed In one undone by the other in areas they overlap.

 

Bob

 

From: main@Uniden.groups.io [mailto:main@Uniden.groups.io] On Behalf Of Marshall Tuttle
Sent: Monday, August 24, 2020 2:58 PM
To: main@uniden.groups.io
Subject: [Uniden] ARC536 Comments please

 

I am considering buying the Butel software. Looking for user comments and suggestions.  Will it coexist with Sentinel on a Win 10 PC?  This is my first post and my radio should arrive later this week.  I am in Colorado Springs CO.

Marshall T.


Re: ARC536 Comments please

Bob Turner
 

It can be a little tricky keeping both Butel and Sentinal in sync. When you write to scanner with one, then read it back into the other before making changes with the other.  When you write it back then read back in the other.  It’s not the end of the world if you forget the write with one, read (and save) from the other routine.  You just might find something you changed In one undone by the other in areas they overlap.

 

Bob

 

From: main@Uniden.groups.io [mailto:main@Uniden.groups.io] On Behalf Of Marshall Tuttle
Sent: Monday, August 24, 2020 2:58 PM
To: main@uniden.groups.io
Subject: [Uniden] ARC536 Comments please

 

I am considering buying the Butel software. Looking for user comments and suggestions.  Will it coexist with Sentinel on a Win 10 PC?  This is my first post and my radio should arrive later this week.  I am in Colorado Springs CO.

Marshall T.


Re: ARC536 Comments please

Joe M.
 

I've never heard of anyone having issues due to
having both Sentinel and ARC installed on the same PC.

Now both running at the same time might have port claim issues.

Joe M.

On 8/24/2020 2:57 PM, Marshall Tuttle wrote:
I am considering buying the Butel software. Looking for user comments
and suggestions. Will it coexist with Sentinel on a Win 10 PC? This is
my first post and my radio should arrive later this week. I am in
Colorado Springs CO.
Marshall T.


ARC536 Comments please

Marshall Tuttle
 

I am considering buying the Butel software. Looking for user comments and suggestions.  Will it coexist with Sentinel on a Win 10 PC?  This is my first post and my radio should arrive later this week.  I am in Colorado Springs CO.
Marshall T.


Re: SDS-100 Charging

Joe M.
 

When using the clip, make sure of two things:

1. Make sure the battery compartment is FULLY seated.

2. Press on the END of the clip (not the middle).

That will help prevent breaking it.

Joe M.

On 8/24/2020 8:31 AM, burbank via groups.io wrote:
On Sun, Aug 23, 2020 at 05:43 PM, JD wrote:

I snapped the battery compartment clip and Uniden send me a new one.

JD. This is great news. I thought if I break my clip I'd have to send
the unit in for repair.

<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>


<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>


Re: SDS-100 Charging

Joe M.
 

Correct on the heat.

It's always better to charge outside the scanner.

Joe M.

On 8/24/2020 8:14 AM, burbank via groups.io wrote:
My SDS-100 gets quite warm but I don't think it's charging that
generates all that heat. I've always assumed it's the CPU which does a
lot of work when the scanner is turned on. I don't think you should
hesitate to charge the battery while it's in the scanner.


Re: SDS-100 Charging

burbank@...
 

On Sun, Aug 23, 2020 at 05:43 PM, JD wrote:
I snapped the battery compartment clip and  Uniden send me a new one.
JD. This is great news. I thought if I break my clip I'd have to send the unit in for repair.


Re: SDS-100 Charging

burbank@...
 

My SDS-100 gets quite warm but I don't think it's charging that generates all that heat. I've always assumed it's the CPU which does a lot of work when the scanner is turned on. I don't think you should hesitate to charge the battery while it's in the scanner.


Re: SDS-100 Charging

Manlius
 

Regarding the SMA connection and the battery door latch, if you’re at all active on FB, join the “Uniden BCD436HP / BCD536HP / SDS200 / SDS100 Scanner Owner’s Group” and look for Johnathan Wienke. He makes well thought out high quality components that will take care of both of these issues, in addition to performing modifications, such as internal GPS units for both the 436 and SDS100’s and high capacity battery upgrade for the 436. His work is top drawer and the prices are very reasonable. 

As far as the heat issue and charging on the SDS100, mine is almost always plugged in (bought mine a few months before the battery upgrade was shipped). Never a problem.  From what I’ve read, they seem to like being a bit warm. 


Re: SDS-100 Charging

JD
 

My SDS100 has been plugged in (usb) and perched on a metal stand for over a year now - 12-14 hrs a day and in a hard leather case from Scanner Master. No heat no worries. In fact, I have not had any problems with my SDS100 or my SDS200 that was not my fault. I snapped the battery compartment clip and  Uniden send me a new one. My big Uniden Problem. They were on it like a duck on a June bug. Great radios.

I do not work for, nor am I affiliated with the Uniden Corporation.

On Sunday, August 23, 2020, 12:09:01 PM EDT, Jeff Lastname via groups.io <cowtipper9@...> wrote:


Just bough SDS-100 and I'm afraid to charge the unit with battery inside so will buy external charger and extra battery. Unit does get very hot and probably will last longer using external charger. Only drawback is the flimsy design of the radio, which has the latch on the bottom you have to open and close. It can easily break and then requires a replacement part. I think the way they designed the radio is awful. The radio reception and features on the screen are excellent, but the design is really lousy. Also the antenna doesn't fit standard SMA antennas like the Diamond SRH77CA. I was sold this antenna since it should have fit, but due to Uniden's design of the antenna mount and the desire to keep it water proof the standard SMA antenna doesn't fit. You have to use the SMA/BNC converter and that results in losing the water proof design. I still like the radio but just wish they had worked out these issues first. Maybe they will in a redesign.




Re: SDS-100 Charging

Joel Kahn
 

This is just another reason why I only charge the batteries for my various radios using a MaHa charger and not in the radio

Joel R Kahn



On Saturday, August 22, 2020, 02:57:56 AM EDT, KA9QJG <ka9qjg@...> wrote:


I  hope everyone is Staying Safe and Healthy ,  Thought I would share an observation with My SDS-100 A few months ago  I posted  how I had  used a Motorola  Microphone Mic holder  mounted to the dash of my vehicle it holds  the radio great ,   I used  a lighter plug USB  for charging  it was  by the Air condition vent .I noticed it was taking a very long time to charge   and the Green Led  did not light . I felt the radio and it was Hot. . So I took it away from the cold air vent and remounted it and it charged up fine. So the charging circuit I believe it being controlled by the feedback Cold or Hot from the scanner.

 

Well this evening it was a little warm in my radio room I had a small fan blowing toward my desk, I put the scanner  not to far away from the fan . I noticed  the  Charge led was   taking a long time to go to green charge,  I felt the radio after a couple of hours it was  hot to the touch,   So I let the scanner cool down moved the fan and it charged fine .  So I would recommend charging the Scanner in a normal temp area. I believe in my experience that if Cold

or Hot air is on the scanner it affects the rate of charge sensor, rather be safe and not over charge because the radio is cool

 

Everyone Stay Safe and Healthy Don KA9QJG

 


Re: SDS-100 Charging

Jeff Lastname
 

Just bough SDS-100 and I'm afraid to charge the unit with battery inside so will buy external charger and extra battery. Unit does get very hot and probably will last longer using external charger. Only drawback is the flimsy design of the radio, which has the latch on the bottom you have to open and close. It can easily break and then requires a replacement part. I think the way they designed the radio is awful. The radio reception and features on the screen are excellent, but the design is really lousy. Also the antenna doesn't fit standard SMA antennas like the Diamond SRH77CA. I was sold this antenna since it should have fit, but due to Uniden's design of the antenna mount and the desire to keep it water proof the standard SMA antenna doesn't fit. You have to use the SMA/BNC converter and that results in losing the water proof design. I still like the radio but just wish they had worked out these issues first. Maybe they will in a redesign.


SDS-100 Charging

KA9QJG
 

I  hope everyone is Staying Safe and Healthy ,  Thought I would share an observation with My SDS-100 A few months ago  I posted  how I had  used a Motorola  Microphone Mic holder  mounted to the dash of my vehicle it holds  the radio great ,   I used  a lighter plug USB  for charging  it was  by the Air condition vent .I noticed it was taking a very long time to charge   and the Green Led  did not light . I felt the radio and it was Hot. . So I took it away from the cold air vent and remounted it and it charged up fine. So the charging circuit I believe it being controlled by the feedback Cold or Hot from the scanner.

 

Well this evening it was a little warm in my radio room I had a small fan blowing toward my desk, I put the scanner  not to far away from the fan . I noticed  the  Charge led was   taking a long time to go to green charge,  I felt the radio after a couple of hours it was  hot to the touch,   So I let the scanner cool down moved the fan and it charged fine .  So I would recommend charging the Scanner in a normal temp area. I believe in my experience that if Cold

or Hot air is on the scanner it affects the rate of charge sensor, rather be safe and not over charge because the radio is cool

 

Everyone Stay Safe and Healthy Don KA9QJG

 


Re: UNIDEN BC75XLT

Lloyd Leonard
 

no ,,, the Ontario Northland Railway

621 - 640 of 1843