Date   
Re: The so called noise or hum depressor. SDS200 Noise Mitigation with Factory Part

Joe M.
 

It may not matter, as it is the same thickness either way. If I was pushed into an answer, I would say the one the factory installed is correct. But again, it may not matter.

Do both units you have eliminate the vibration?

Joe M.

On 1/27/2020 6:28 PM, Mark Bradley wrote:
Question.....I saw the video on replacing the little square tin with
copper on it.OK,the video showed the person putting the SDS200 Noise
Suppressor Piece,he put it on with the TIN side up. OK,I took my scanner
apart to see if it had it in there,and yes it did. But one
problem,,,,this is put in with the COPPER side up.OK,which way does it
go?????????I see it was done on mine,and also no scraping of the foam or
rubber seal with the Uniden Buzz Be Gone Fix. I ordered one of those
Buzz Be Gone Eliminator Fix Parts,I was going to put it 3 inches over
from the other side for double BUZZ be gone fix,I will put it with the
Copper side up,like the other side.I am curious if any one knows the
CORRECT WAY to install the Metal,Copper tab.Thank you for your time,I
appreciate this as I am wanting to know,the correct way. Have a great
evening,,,Mark



<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>


<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

The so called noise or hum depressor. SDS200 Noise Mitigation with Factory Part

Mark Bradley
 

Question.....I saw the video on replacing the little square tin with copper on it.OK,the video showed the person putting the  SDS200  Noise Suppressor Piece,he put it on with the TIN side up. OK,I took my scanner apart to see if it had it in there,and yes it did. But one problem,,,,this is put in with the COPPER side up.OK,which way does it go?????????I see it was done on mine,and also no scraping of the foam or rubber seal with the Uniden Buzz Be Gone Fix. I ordered one of those Buzz Be Gone Eliminator Fix Parts,I was going to put it 3 inches over from the other side for double BUZZ be gone fix,I will put it with the Copper side up,like the other side.I am curious if any one knows the CORRECT WAY to install the Metal,Copper tab.Thank you for your time,I appreciate this as I am wanting to know,the correct way. Have a great evening,,,Mark

 

 

Re: How to set up a Radio ID to a Specific Tag Display

PoliceScanner nut
 

Awesome! Thanks for the response! 

Marvin

Re: How to set up a Radio ID to a Specific Tag Display

Jan Fine
 

Yes. Each system has a settings for Units. That is where you put the RID and any Alphanumeric you want.

On 12/1/2019 2:13 PM, PoliceScanner nut wrote:
Hello,

I have not yet purchased my SDS 200 scanner and wondered if it is possible to tag a radio ID? In other words, when say radio ID 25398653 keys up, it will display "Police Car 25" instead of the radio ID. I currently own a Uniden 396XLT and this works if you enter the radio ID in a group in the same system and assign the radio ID to the nomenclature as "Police Car 25". Is this possible with the SDS 200? If so, how can this be done?

Thanks for your help!

Marvin

Re: How to set up a Radio ID to a Specific Tag Display

Joe M.
 

Yes, it is possible. You program the Radio IDs under Unit IDs.

Joe M.

On 12/1/2019 2:13 PM, PoliceScanner nut wrote:
Hello,

I have not yet purchased my SDS 200 scanner and wondered if it is
possible to tag a radio ID? In other words, when say radio ID 25398653
keys up, it will display "Police Car 25" instead of the radio ID. I
currently own a Uniden 396XLT and this works if you enter the radio ID
in a group in the same system and assign the radio ID to the
nomenclature as "Police Car 25". Is this possible with the SDS 200? If
so, how can this be done?

Thanks for your help!

Marvin

<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
Virus-free. www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>


<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

How to set up a Radio ID to a Specific Tag Display

PoliceScanner nut
 

Hello,

I have not yet purchased my SDS 200 scanner and wondered if it is possible to tag a radio ID? In other words, when say radio ID 25398653 keys up, it will display "Police Car 25" instead of the radio ID. I currently own a Uniden 396XLT and this works if you enter the radio ID in a group in the same system and assign the radio ID to the nomenclature as "Police Car 25". Is this possible with the SDS 200? If so, how can this be done?

Thanks for your help!

Marvin

New file uploaded to SDS200

SDS200@...
 

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the SDS200
group.

File : /SDSx00_File_Specification_V1_03.pdf
Uploaded by : alphaacres <alphaacres@...>
Description : SDSx00_File_Specification_V1_03

You can access this file at the URL:
https://groups.yahoo.com/neo/groups/SDS200/files/SDSx00_File_Specification_V1_03.pdf

To learn more about file sharing for your group, please visit:
https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_US&id=SLN15398

Regards,

alphaacres <alphaacres@...>

New file uploaded to SDS200

SDS200@...
 

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the SDS200
group.

File : /SDS200_Virtual_Serial_on_Network_Specification_V1_00.pdf
Uploaded by : alphaacres <alphaacres@...>
Description : SDS200_Virtual_Serial_on_Network_Specification_V1_00

You can access this file at the URL:
https://groups.yahoo.com/neo/groups/SDS200/files/SDS200_Virtual_Serial_on_Network_Specification_V1_00.pdf

To learn more about file sharing for your group, please visit:
https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_US&id=SLN15398

Regards,

alphaacres <alphaacres@...>

New file uploaded to SDS200

SDS200@...
 

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the SDS200
group.

File : /SDS200_RemoteCommand_Specification_V0_01.pdf
Uploaded by : alphaacres <alphaacres@...>
Description : SDS200_RemoteCommand_Specification_V0_01

You can access this file at the URL:
https://groups.yahoo.com/neo/groups/SDS200/files/SDS200_RemoteCommand_Specification_V0_01.pdf

To learn more about file sharing for your group, please visit:
https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_US&id=SLN15398

Regards,

alphaacres <alphaacres@...>

Re: programing the sds200

Jan Fine
 

NO need to buy. Use Uniden's software.

On 7/14/2019 10:21 PM, gtucker98@... [SDS200] wrote:
 

this may have been asked before i just purchased a sds200 like to know what is the easiest programing software if i buy


programing the sds200

George Tucker
 

this may have been asked before i just purchased a sds200 like to know what is the easiest programing software if i buy


New file uploaded to SDS200

SDS200@...
 

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the SDS200
group.

File : /SDS200 Firmware/SDS200_V1_10_00M_V1_02_01S.zip
Uploaded by : alphaacres <alphaacres@...>
Description : SDS200_V1_10_00M_V1_02_01S

You can access this file at the URL:
https://groups.yahoo.com/neo/groups/SDS200/files/SDS200%20Firmware/SDS200_V1_10_00M_V1_02_01S.zip

To learn more about file sharing for your group, please visit:
https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_US&id=SLN15398

Regards,

alphaacres <alphaacres@...>

New file uploaded to SDS200

SDS200@...
 

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the SDS200
group.

File : /SDS200 Firmware/SDS200_V1_09_02M_V1_02_01S.zip
Uploaded by : alphaacres <alphaacres@...>
Description : SDS200_V1_09_02M_V1_02_01S

You can access this file at the URL:
https://groups.yahoo.com/neo/groups/SDS200/files/SDS200%20Firmware/SDS200_V1_09_02M_V1_02_01S.zip

To learn more about file sharing for your group, please visit:
https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_US&id=SLN15398

Regards,

alphaacres <alphaacres@...>

Remote Head?

Bill Nolan
 

Is there a remote head for the SDS200 in the future?

SDS200 Review

Bill Nolan
 

The Spectrum Monitor on-line magazine‘s April 2019 edition includes a review of the Uniden SDS200 Scanner authored by Larry Van Horn.

Mr. Van Horn is no stranger to the hobby. I believe he got his introduction to the hobby in the sixties and has kept with it, along the way writing for Bob Grove’s Monitoring Times Magazine. He has a well deserved chair at the table of scanning excellence and industry respect.

The Spectrum Monitor can be had for $24 per year (Jan-Dec) or any individual month for $3.

I do not propose reposting of the review or any part of it here WITHOUT Mr. Van Horn’s permission but thought the review is worth mentioning. I went online and purchased the month of April just for the review.

Bill

The Spectrum Monitor on-line magazine

Bill Nolan
 

The Spectrum Monitor on-line magazine‘s April 2019 edition includes a review of the Uniden SDS200 Scanner authored by Larry Van Horn.

Mr. Van Horn is no stranger to the hobby. I believe he got his introduction to the hobby in the sixties and has kept with it, along the way writing for Bob Grove’s Monitoring Times Magazine. He has a well deserved chair at the table of scanning excellence and industry respect.

The Spectrum Monitor can be had for $24 per year (Jan-Dec) or any individual month for $3.

I do not propose reposting of the review or any part of it here WITHOUT Mr. Van Horn’s permission but thought the review is worth mentioning. I went online and purchased the month of April just for the review.

Bill

New file uploaded to SDS200

SDS200@...
 

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the SDS200
group.

File : /SDS200 Firmware/SDS200_V1_09_01 Open Beta.zip
Uploaded by : alphaacres <alphaacres@...>
Description : SDS200_V1_09_01 Open Beta.zip

You can access this file at the URL:
https://groups.yahoo.com/neo/groups/SDS200/files/SDS200%20Firmware/SDS200_V1_09_01%20Open%20Beta.zip

To learn more about file sharing for your group, please visit:
https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_US&id=SLN15398

Regards,

alphaacres <alphaacres@...>

New file uploaded to SDS200

SDS200@...
 

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the SDS200
group.

File : /SDS200 Firmware/SDS200_V1_09_00 Open Beta.zip
Uploaded by : alphaacres <alphaacres@...>
Description : SDS200_V1_09_00 Open Beta.zip

You can access this file at the URL:
https://groups.yahoo.com/neo/groups/SDS200/files/SDS200%20Firmware/SDS200_V1_09_00%20Open%20Beta.zip

To learn more about file sharing for your group, please visit:
https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_US&id=SLN15398

Regards,

alphaacres <alphaacres@...>

Re: Private Calls

Jan Fine
 

Yep.

On 3/9/2019 2:29 PM, policescannernut@... [SDS200] wrote:
 

Is this scanner capable of programming/monitoring Private Calls like the BCD996XT? In other words, can I program in a group of radio ID's and monitor those?


Thanks!

Marvin

New file uploaded to SDS200

SDS200@...
 

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the SDS200
group.

File : /SDS200 Firmware/SDS200_V1_08_05M_V1_02_01S.zip
Uploaded by : alphaacres <alphaacres@...>
Description : SDS200_V1_08_05M_V1_02_01S.zip

You can access this file at the URL:
https://groups.yahoo.com/neo/groups/SDS200/files/SDS200%20Firmware/SDS200_V1_08_05M_V1_02_01S.zip

To learn more about file sharing for your group, please visit:
https://help.yahoo.com/kb/index?page=content&y=PROD_GRPS&locale=en_US&id=SLN15398

Regards,

alphaacres <alphaacres@...>