I have posted this in both the P2 & XT group in hopes someone can give me some feedback. I have had both the 996XT & the P2 since they came 1st came out. I have noticed for a long time that on the P2

Hi Everybody; We have completed the mod of the BCD996P2 to include a 12kHz IF output that can be used to display a spectrum scope or with use of the MDSR software which can be downloaded and used for

Thanks for your time Group! When creating a P25 Standard System, when I get to where I enter the Frequencies, I also enter the LCN order. The Frequencies will stay but the LCN order shows blank after

Does anyone know if Lake County Public Safety has once again changed talkgroups, etc. All of a sudden (Sunday night/Monday Morning) my scanner is silent on Lake County Fire/EMS and Law Enforcement tal

When in "Scan"mode are the Fire Tone out frequencies being monitored?

Happy New Year Group!! I do not know if this question has been asked and answered or not... Can the BCD996P2 be updated to the new Pro Voice like the 536 can? Could it be updated? Are there plans to U

Good Evening, I have the BCD996P2 scanner. I have a P25 P2 System called Bucks County. Now, I download the frequencies from Radio Reference into ARC-XT. When I look at the Simulcast frequencies it has

Hi - I'm just getting started with the BCD996P2 and have a question. I'm learning about Freescan for programming, have added Conventional system/group/frequencies. I now have LA County which uses P25

Good Evening, I wrote earlier about the Bucks County P25 P2 System. When I put the scanner in hold/manual and go to the different frequencies, the scanner will show the message finding control channel

Good Evening, I live about 35 miles northwest of Philadelphia. I was hoping to receive the Bucks County P2 and Chester County P2 networks. I have an Mobile antenna that is attached to the BCD996p2 but

hello group i see there is a firmware update for the 536,is there a firmware update available for the 996p2. thank you Leonard

How is this unit for the digital decoding for APCO P25 Phase II. My fire service is switching to the digital 800MHz, and I just want to make sure that I can clearly understand what they are saying, be

I have a couple 996XT's, 396XT's so I'm not new to the platform. Also have HP-1 and HP-2's. My question is, is the 996P2 just as sensitive as the HP-2? I listen to PD and FD only, mostly analog, and s

hello group i have been trying to program my 96p2 with arcxt pro.i wonder if someone could look on radio reference at carroll county maryland.i can hear their alerts on 155.055 but cannot hear anythin

Hi All, Recently while traveling I tried to save a TGID to Quick Save and got the message 'Overlimit'. I went into quick save. there were 6 entries. I copied 4 of them to othe groups then deleted them

hello group isn't there someone in this group that lives in carroll county maryland? i thought places like this is where one could/can get help with these new fangeled machines.the only contact i have

I only have a BCD996T, but a friend asked me about the priority scan feature on the BCD996P2. How well does it work for trunked systems? If he wanted to monitor a talkgroup on system "A" while scannin

I miss those day’s as well Martin. But what I miss the most is there no going to be NO Law, Ems or Fire within a couple of months here in Mobile County Alabama. So these 246’s, 330’s, 996’s, 996XT’s s

hello group i have tried all of the suggestions for turning off the weather alert in the p2 and none have worked.wuld anyone have any other suggestions to permanently stop the weather alerts thank you

Has anyone run into this. Reception was choppy and cutting off. For other reasons, PC Crash, i started running 996P2 by itself and the reception was great.