Rebanding Questions


Kirk J <kjones_731@...>
 

I have been trying to reband a bc796d with poor results.

The details:

Ohio MARCS Franklin County Mot Type II SmartZone Omnilink apco25

851.7875 851.8125 852.1750 852.2125 852.2875 852.4750 852.7750
852.8000 853.1125 853.1750 853.3625 853.4875 854.1875 859.1875


band plan base freq(lower) base freq (upper) offset polarity spacing

1 851.0250mhz 854.0000mhz 440 + 25khz
2 851.0125mhz 868.9875mhz 0 + 25khz

Judging by this I need plan 2

Tried using arc250pro versions 1.5 with no luck
I am trying scannersoft full uniden edition software.
This looks like it should work except I don't know what to put in this edit table. ( I hope this is the last step!)

Row# Lower Base Upper Base Offset Polarity Space
1. ______ ______ ___ ____ ____
2. ______ ______ ___ ____ ____
3. ______ ______ ___ ____ ____
4. ______ ______ ___ ____ ____
5. ______ ______ ___ ____ ____
6. ______ ______ ___ ____ ____

So, I have the settings as custom plan 2 with the 4 control channels programed. What do I enter in the above table??????? I have tried using the plan 2 on the first line etc and it doesn't work. I guess I can't see the forest for the trees. I have programed custom type 2 into the scanner also. Any help would be appreciated. Thanks so much from cold Ohio -18 F this am. 73"s


Mark Levine, D.C.
 

You need both base plans entered. Do it by hand, it's very easy

----- Original Message -----
From: "Kirk J" <kjones_731@...>
To: <BC796D@...>
Sent: Tuesday, January 28, 2014 10:50 AM
Subject: [BC796D] Rebanding Questions


I have been trying to reband a bc796d with poor results.

The details:

Ohio MARCS Franklin County Mot Type II SmartZone Omnilink apco25

851.7875 851.8125 852.1750 852.2125 852.2875 852.4750 852.7750
852.8000 853.1125 853.1750 853.3625 853.4875 854.1875 859.1875


band plan base freq(lower) base freq (upper) offset polarity spacing

1 851.0250mhz 854.0000mhz 440 + 25khz
2 851.0125mhz 868.9875mhz 0 + 25khz

Judging by this I need plan 2

Tried using arc250pro versions 1.5 with no luck
I am trying scannersoft full uniden edition software.
This looks like it should work except I don't know what to put in this edit table. ( I hope this is the last step!)

Row# Lower Base Upper Base Offset Polarity Space
1. ______ ______ ___ ____ ____
2. ______ ______ ___ ____ ____
3. ______ ______ ___ ____ ____
4. ______ ______ ___ ____ ____
5. ______ ______ ___ ____ ____
6. ______ ______ ___ ____ ____

So, I have the settings as custom plan 2 with the 4 control channels programed. What do I enter in the above table??????? I have tried using the plan 2 on the first line etc and it doesn't work. I guess I can't see the forest for the trees. I have programed custom type 2 into the scanner also. Any help would be appreciated. Thanks so much from cold Ohio -18 F this am. 73"s









------------------------------------

Files page: http://groups.yahoo.com/group/BC796D/files/

Yahoo Groups Links



Kirk Jones <kjones_731@...>
 

  Still get only activity on the 3 inactive control channels.  The control channels are

853.1125   853.3625   853.3625   853.4895  Currently 853.4895 is the control channel and the other 3 are the only ones showing activity.  I have tried every way I know.  HELP!  please




From: "Mark Levine, D.C."
To: BC796D@...
Sent: Tuesday, January 28, 2014 10:57 AM
Subject: Re: [BC796D] Rebanding Questions

You need both base plans entered. Do it by hand, it's very easy


----- Original Message -----
From: "Kirk J" <kjones_731@...>
To: <BC796D@...>
Sent: Tuesday, January 28, 2014 10:50 AM
Subject: [BC796D] Rebanding Questions


>I have been trying to reband a bc796d with poor results.
>
> The details:
>
> Ohio MARCS  Franklin County  Mot Type II SmartZone Omnilink apco25
>
>  851.7875 851.8125  852.1750  852.2125 852.2875 852.4750  852.7750
>  852.8000 853.1125  853.1750  853.3625 853.4875 854.1875  859.1875
>
>
>  band plan  base freq(lower)  base freq (upper) offset polarity spacing
>
>    1        851.0250mhz        854.0000mhz      440    +      25khz
>    2        851.0125mhz        868.9875mhz      0      +      25khz
>
>  Judging by this I need plan 2
>
>  Tried using arc250pro versions 1.5 with no luck
>  I am trying scannersoft full uniden edition software.
>  This looks like it should work except I don't know what to put in  this
> edit table. ( I hope this is the last step!)
>
>  Row#  Lower Base  Upper Base  Offset  Polarity  Space
>  1.      ______      ______        ___        ____    ____
>  2.      ______      ______        ___        ____    ____
>  3.      ______      ______        ___        ____    ____
>  4.      ______      ______        ___        ____    ____
>  5.      ______      ______        ___        ____    ____
>  6.      ______      ______        ___        ____    ____
>
>  So, I have the settings as custom plan 2 with the 4 control channels
> programed.  What do I enter in the above table??????? I have tried using
> the plan 2 on the first line etc and it doesn't work. I guess I can't see
> the forest for the trees. I have programed custom type 2 into the scanner
> also. Any help would be appreciated.  Thanks so much from cold Ohio -18 F
> this am.  73"s
>
>
>
>
>
>
>
>
>
> ------------------------------------
>
> Files page: http://groups.yahoo.com/group/BC796D/files/
>
> Yahoo Groups Links
>
>
>



------------------------------------

Files page: http://groups.yahoo.com/group/BC796D/files/

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/BC796D/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/BC796D/join
    (Yahoo! ID required)

<*> To change settings via email:
    BC796D-digest@...
    BC796D-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
    BC796D-unsubscribe@...

<*> Your use of Yahoo Groups is subject to:
    http://info.yahoo.com/legal/us/yahoo/utos/terms/